On 11/25/24 1:21 PM, Konrad Dybcio wrote:
On 24.11.2024 11:00 AM, Maud Spierings via B4 Relay wrote:
From: Maud Spierings <maud_spieri...@hotmail.com>
The Asus vivobook s15 uses the ATNA56AC03 panel.
This panel is controlled by the atna33xc20 driver instead of the generic
edp-panel driver
Signed-off-by: Maud Spierings <maud_spieri...@hotmail.com>
---
arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
index
f25991b887de3fca0092c5f81c881c5d8bd71aac..dbc85aff50a95bfc2ac11528d1901979ec7b1501
100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
@@ -407,9 +407,13 @@ &mdss_dp3 {
aux-bus {
panel {
- compatible = "edp-panel";
+ compatible = "samsung,atna56ac03", "samsung,atna33xc20";
+ enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
power-supply = <&vreg_edp_3p3>;
+ pinctrl-0 = <&edp_bl_en>;
+ pinctrl-names = "default";
+
port {
edp_panel_in: endpoint {
remote-endpoint = <&mdss_dp3_out>;
@@ -475,6 +479,16 @@ &pcie6a_phy {
status = "okay";
};
+&pmc8380_3_gpios {
+ edp_bl_en: edp-bl-en-state {
+ pins = "gpio4";
+ function = "normal";
+ power-source = <0>;
This is <1> on other boards.. I'm guessing you verified this against
at-boot values?
Konrad
I checked all the other gpios in these patches but it seems I did not do
the same for this one. It is indeed supposed to be <1>, I wonder if the
lenovo slim 7 dts is wrong too then.
Anyways, I will fix this, with a couple of other parameters that have to
be added as well.
Terribly sorry for the lack of checking and thank you for spotting this.
Kind regards, Maud
