On the D1 and T113 the TCON TOP cannot handle setting both DEs to a
single output, even if the outputs are disabled. As a workaround assign
DE1 to TVE0 by default.
A full fix for this would include logic that makes sure both DEs never
share the same output.
Signed-off-by: John Watts <cont...@jookia.org>
---
drivers/gpu/drm/sun4i/sun8i_tcon_top.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
index
a1ca3916f42bcc63b9ac7643e788d962ef360ca8..543311ffb1509face3fbfd069ded10933f254b9d
100644
--- a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
+++ b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
@@ -179,7 +179,7 @@ static int sun8i_tcon_top_bind(struct device *dev, struct
device *master,
* At least on H6, some registers have some bits set by default
* which may cause issues. Clear them here.
*/
- writel(0, regs + TCON_TOP_PORT_SEL_REG);
+ writel(0x20, regs + TCON_TOP_PORT_SEL_REG);
writel(0, regs + TCON_TOP_GATE_SRC_REG);
/*
---
base-commit: 98f7e32f20d28ec452afb208f9cffc08448a2652
change-id: 20241108-tcon_fix-f0585ac9bae0
Best regards,
--
John Watts <cont...@jookia.org>
