On 26/10/24 - 12:22, Maíra Canal wrote:
> Hi Louis,
>
> On 10/10/24 14:27, Louis Chauvet wrote:
> > VKMS currently supports only one CRTC, so it make no sense to have this
> > index configurable. To avoid issues, replace this hardcoded index by
> > drm_crtc_mask when applicable.
> >
> > There is no need to manually set a crtc mask on primary and cursor plane
> > as it is automatically set by drmm_crtc_alloc_with_planes.
> >
> > In addition, this will remove the use of an uninitialized structure in
> > vkms_add_overlay_plane. This currently works by chance because two things:
> > - vkms_plane_init always set a possible_crtcs value, so the problematic
> > branch is never used;
> > - drm_crtc_mask on an kzalloc'd drm_crtc returns BIT(0), and the VKMS CRTC
> > always have this id.
> >
> > Signed-off-by: Louis Chauvet <louis.chau...@bootlin.com>
> > ---
> > Changes in v2:
> > - Applied comments from José
> > - Link to v1:
> > https://lore.kernel.org/r/20240906-vkms-remove-index-v1-1-3cfedd8cc...@bootlin.com
> > ---
> > drivers/gpu/drm/vkms/vkms_drv.c | 2 +-
> > drivers/gpu/drm/vkms/vkms_drv.h | 8 ++----
> > drivers/gpu/drm/vkms/vkms_output.c | 54
> > ++++++++++++++------------------------
> > drivers/gpu/drm/vkms/vkms_plane.c | 4 +--
> > 4 files changed, 24 insertions(+), 44 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/vkms/vkms_drv.c
> > b/drivers/gpu/drm/vkms/vkms_drv.c
> > index 2d1e95cb66e5..0f6805b9fe7b 100644
> > --- a/drivers/gpu/drm/vkms/vkms_drv.c
> > +++ b/drivers/gpu/drm/vkms/vkms_drv.c
> > @@ -174,7 +174,7 @@ static int vkms_modeset_init(struct vkms_device
> > *vkmsdev)
> > dev->mode_config.preferred_depth = 0;
> > dev->mode_config.helper_private = &vkms_mode_config_helpers;
> > - return vkms_output_init(vkmsdev, 0);
> > + return vkms_output_init(vkmsdev);
> > }
> > static int vkms_create(struct vkms_config *config)
> > diff --git a/drivers/gpu/drm/vkms/vkms_drv.h
> > b/drivers/gpu/drm/vkms/vkms_drv.h
> > index 672fe191e239..036101ee4ea1 100644
> > --- a/drivers/gpu/drm/vkms/vkms_drv.h
> > +++ b/drivers/gpu/drm/vkms/vkms_drv.h
> > @@ -212,21 +212,17 @@ int vkms_crtc_init(struct drm_device *dev, struct
> > drm_crtc *crtc,
> > * vkms_output_init() - Initialize all sub-components needed for a VKMS
> > device.
> > *
> > * @vkmsdev: VKMS device to initialize
> > - * @index: CRTC which can be attached to the planes. The caller must
> > ensure that
> > - * @index is positive and less or equals to 31.
> > */
> > -int vkms_output_init(struct vkms_device *vkmsdev, int index);
> > +int vkms_output_init(struct vkms_device *vkmsdev);
> > /**
> > * vkms_plane_init() - Initialize a plane
> > *
> > * @vkmsdev: VKMS device containing the plane
> > * @type: type of plane to initialize
> > - * @index: CRTC which can be attached to the plane. The caller must ensure
> > that
> > - * @index is positive and less or equals to 31.
> > */
> > struct vkms_plane *vkms_plane_init(struct vkms_device *vkmsdev,
> > - enum drm_plane_type type, int index);
> > + enum drm_plane_type type);
> > /* CRC Support */
> > const char *const *vkms_get_crc_sources(struct drm_crtc *crtc,
> > diff --git a/drivers/gpu/drm/vkms/vkms_output.c
> > b/drivers/gpu/drm/vkms/vkms_output.c
> > index 0a5a185aa0b0..5128aa3b2eb6 100644
> > --- a/drivers/gpu/drm/vkms/vkms_output.c
> > +++ b/drivers/gpu/drm/vkms/vkms_output.c
> > @@ -32,29 +32,14 @@ static const struct drm_connector_helper_funcs
> > vkms_conn_helper_funcs = {
> > .get_modes = vkms_conn_get_modes,
> > };
> > -static int vkms_add_overlay_plane(struct vkms_device *vkmsdev, int index,
> > - struct drm_crtc *crtc)
> > -{
> > - struct vkms_plane *overlay;
> > -
> > - overlay = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_OVERLAY, index);
> > - if (IS_ERR(overlay))
> > - return PTR_ERR(overlay);
> > -
> > - if (!overlay->base.possible_crtcs)
> > - overlay->base.possible_crtcs = drm_crtc_mask(crtc);
> > -
> > - return 0;
> > -}
> > -
> > -int vkms_output_init(struct vkms_device *vkmsdev, int index)
> > +int vkms_output_init(struct vkms_device *vkmsdev)
> > {
> > struct vkms_output *output = &vkmsdev->output;
> > struct drm_device *dev = &vkmsdev->drm;
> > struct drm_connector *connector = &output->connector;
> > struct drm_encoder *encoder = &output->encoder;
> > struct drm_crtc *crtc = &output->crtc;
> > - struct vkms_plane *primary, *cursor = NULL;
> > + struct vkms_plane *primary, *overlay, *cursor = NULL;
> > int ret;
> > int writeback;
> > unsigned int n;
> > @@ -65,34 +50,37 @@ int vkms_output_init(struct vkms_device *vkmsdev, int
> > index)
> > * The overlay and cursor planes are not mandatory, but can be used to
> > perform complex
> > * composition.
> > */
> > - primary = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_PRIMARY, index);
> > + primary = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_PRIMARY);
> > if (IS_ERR(primary))
> > return PTR_ERR(primary);
> > - if (vkmsdev->config->overlay) {
> > - for (n = 0; n < NUM_OVERLAY_PLANES; n++) {
> > - ret = vkms_add_overlay_plane(vkmsdev, index, crtc);
> > - if (ret)
> > - return ret;
> > - }
> > - }
> > -
> > if (vkmsdev->config->cursor) {
> > - cursor = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_CURSOR, index);
> > + cursor = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_CURSOR);
> > if (IS_ERR(cursor))
> > return PTR_ERR(cursor);
> > }
> > - /* [1]: Allocation of a CRTC, its index will be BIT(0) = 1 */
> > ret = vkms_crtc_init(dev, crtc, &primary->base, &cursor->base);
> > if (ret)
> > return ret;
> > + if (vkmsdev->config->overlay) {
> > + for (n = 0; n < NUM_OVERLAY_PLANES; n++) {
> > + overlay = vkms_plane_init(vkmsdev,
> > DRM_PLANE_TYPE_OVERLAY);
> > + if (IS_ERR(overlay)) {
> > + DRM_DEV_ERROR(dev->dev, "Failed to init vkms
> > plane\n");
> > + ret = PTR_ERR(overlay);
> > + goto err_crtc;
> > + }
> > + overlay->base.possible_crtcs = drm_crtc_mask(crtc);
> > + }
> > + }
> > +
> > ret = drm_connector_init(dev, connector, &vkms_connector_funcs,
> > DRM_MODE_CONNECTOR_VIRTUAL);
> > if (ret) {
> > DRM_ERROR("Failed to init connector\n");
> > - goto err_connector;
> > + goto err_crtc;
> > }
> > drm_connector_helper_add(connector, &vkms_conn_helper_funcs);
> > @@ -103,11 +91,7 @@ int vkms_output_init(struct vkms_device *vkmsdev, int
> > index)
> > DRM_ERROR("Failed to init encoder\n");
> > goto err_encoder;
> > }
> > - /*
> > - * This is a hardcoded value to select crtc for the encoder.
> > - * BIT(0) here designate the first registered CRTC, the one allocated
> > in [1]
> > - */
> > - encoder->possible_crtcs = BIT(0);
> > + encoder->possible_crtcs = drm_crtc_mask(crtc);
> > ret = drm_connector_attach_encoder(connector, encoder);
> > if (ret) {
> > @@ -131,7 +115,7 @@ int vkms_output_init(struct vkms_device *vkmsdev, int
> > index)
> > err_encoder:
> > drm_connector_cleanup(connector);
> > -err_connector:
> > +err_crtc:
> > drm_crtc_cleanup(crtc);
>
> Do we really need `drm_crtc_cleanup`? We are allocating the CRTC with
> `drmm_crtc_init_with_planes`.
I agree, I'll check the previous discussions I've had on the mailing list,
I have a little doubt that someone asked me to re-add this cleaning at
some point.
Thanks,
Louis Chauvet
> The rest looks fine to me.
>
> Best Regards,
> - Maíra
>
> > return ret;
> > diff --git a/drivers/gpu/drm/vkms/vkms_plane.c
> > b/drivers/gpu/drm/vkms/vkms_plane.c
> > index e5c625ab8e3e..ad137c9a75f5 100644
> > --- a/drivers/gpu/drm/vkms/vkms_plane.c
> > +++ b/drivers/gpu/drm/vkms/vkms_plane.c
> > @@ -198,12 +198,12 @@ static const struct drm_plane_helper_funcs
> > vkms_plane_helper_funcs = {
> > };
> > struct vkms_plane *vkms_plane_init(struct vkms_device *vkmsdev,
> > - enum drm_plane_type type, int index)
> > + enum drm_plane_type type)
> > {
> > struct drm_device *dev = &vkmsdev->drm;
> > struct vkms_plane *plane;
> > - plane = drmm_universal_plane_alloc(dev, struct vkms_plane, base, 1 <<
> > index,
> > + plane = drmm_universal_plane_alloc(dev, struct vkms_plane, base, 0,
> > &vkms_plane_funcs,
> > vkms_formats,
> > ARRAY_SIZE(vkms_formats),
> > NULL, type, NULL);
> >
> > ---
> > base-commit: 33c255312660653cf54f8019896b5dca28e3c580
> > change-id: 20240906-vkms-remove-index-3a6e04c38e02
> >
> > Best regards,
