[PATCH 35/37] arm64: dts: broadcom: Add firmware clocks and power nodes to Pi5 DT

[Dave Stevenson]

BCM2712 still uses the firmware clocks and power drivers, so add
them to the base device tree.

Signed-off-by: Dave Stevenson <dave.steven...@raspberrypi.com>
---
 arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts | 28 ++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts 
b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
index 2bdbb6780242..92a2ada037f3 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
@@ -62,3 +62,31 @@ &sdio1 {
        sd-uhs-ddr50;
        sd-uhs-sdr104;
 };
+
+&soc {
+       firmware: firmware {
+               compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               mboxes = <&mailbox>;
+               dma-ranges;
+
+               firmware_clocks: clocks {
+                       compatible = "raspberrypi,firmware-clocks";
+                       #clock-cells = <1>;
+               };
+
+               reset: reset {
+                       compatible = "raspberrypi,firmware-reset";
+                       #reset-cells = <1>;
+               };
+       };
+
+       power: power {
+               compatible = "raspberrypi,bcm2835-power";
+               firmware = <&firmware>;
+               #power-domain-cells = <1>;
+       };
+
+};

-- 
2.34.1