Add a HDMI connector to connect with i.MX8MP HDMI TX output.
This is a preparation for making the i.MX8MP LCDIF driver use
drm_bridge_connector which requires the DRM_BRIDGE_ATTACH_NO_CONNECTOR
flag. With that flag, the DW HDMI bridge core driver would
try to attach the next bridge which is the HDMI connector.
Signed-off-by: Liu Ying <victor....@nxp.com>
---
.../dts/freescale/imx8mp-msc-sm2s-ep1.dts | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
index 83194ea7cb81..b776646a258a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
@@ -15,6 +15,17 @@ / {
"avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
"fsl,imx8mp";
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_in: endpoint {
+ remote-endpoint = <&hdmi_tx_out>;
+ };
+ };
+ };
+
reg_vcc_3v3_audio: 3v3-audio-regulator {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3_AUD";
@@ -54,6 +65,14 @@ &hdmi_tx {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hdmi>;
status = "okay";
+
+ ports {
+ port@1 {
+ hdmi_tx_out: endpoint {
+ remote-endpoint = <&hdmi_in>;
+ };
+ };
+ };
};
&hdmi_tx_phy {
--
2.34.1
