Hi
Am 18.08.24 um 22:19 schrieb Laurent Pinchart:
Hi Thomas,
Thank you for the patch.
On Fri, Aug 16, 2024 at 02:23:14PM +0200, Thomas Zimmermann wrote:
Call drm_client_setup() to run the kernel's default client setup
for DRM. Set fbdev_probe in struct drm_driver, so that the client
setup can start the common fbdev client.
Signed-off-by: Thomas Zimmermann <tzimmerm...@suse.de>
Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkei...@ideasonboard.com>
Cc: Michal Simek <michal.si...@amd.com>
---
drivers/gpu/drm/xlnx/zynqmp_kms.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/xlnx/zynqmp_kms.c
b/drivers/gpu/drm/xlnx/zynqmp_kms.c
index bd1368df7870..f26b119322d5 100644
--- a/drivers/gpu/drm/xlnx/zynqmp_kms.c
+++ b/drivers/gpu/drm/xlnx/zynqmp_kms.c
@@ -14,6 +14,7 @@
#include <drm/drm_blend.h>
#include <drm/drm_bridge.h>
#include <drm/drm_bridge_connector.h>
+#include <drm/drm_client_setup.h>
#include <drm/drm_connector.h>
#include <drm/drm_crtc.h>
#include <drm/drm_device.h>
@@ -402,6 +403,7 @@ static const struct drm_driver zynqmp_dpsub_drm_driver = {
DRIVER_ATOMIC,
DRM_GEM_DMA_DRIVER_OPS_WITH_DUMB_CREATE(zynqmp_dpsub_dumb_create),
+ DRM_FBDEV_DMA_DRIVER_OPS,
.fops = &zynqmp_dpsub_drm_fops,
@@ -523,7 +525,7 @@ int zynqmp_dpsub_drm_init(struct zynqmp_dpsub *dpsub)
goto err_poll_fini;
/* Initialize fbdev generic emulation. */
- drm_fbdev_dma_setup(drm, 24);
+ drm_client_setup(drm, drm_format_info(DRM_FORMAT_RGB888));
I know this would be a hassle to change, but do the majority of the
callers of drm_client_setup() have a drm_format_info * already, or do
they need to call drm_format_info() on a 4CC ? In the latter case, would
it be better to pass the 4CC to drm_client_setup() ?
Good idea. Most of the drivers have a 4cc code, but no format-info
pointer. I think there are enough instances that it makes sense to add a
little helper, drm_client_setup_with_fourcc(), for these drivers.
There's also preferred_depth from drm_mode_config. It's already used in
the client mode-setting code. That means that in some drivers, the
format parameter to drm_client_setup() could likely be dropped.
Best regards
Thomas
As far as this patch goes,
Reviewed-by: Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com>
return 0;
--
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstrasse 146, 90461 Nuernberg, Germany
GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman
HRB 36809 (AG Nuernberg)
