Maybe retitle this to something that more closely resembles "remove unset
is_te_using_watchdog_timer field"?
On 2024-06-13 20:05:08, Dmitry Baryshkov wrote:
> The struct msm_display_info has is_te_using_watchdog_timer field which
> is neither used anywhere nor is flexible enough to specify different
Well, it's "used", but not "set" (to anything other than the zero-initialized
default). s/used/set?
> sources. Replace it with the field specifying the vsync source using
> enum dpu_vsync_source.
>
> Reviewed-by: Abhinav Kumar <quic_abhin...@quicinc.com>
> Signed-off-by: Dmitry Baryshkov <dmitry.barysh...@linaro.org>
Patch itself is fine, just think the title could be clearer:
Reviewed-by: Marijn Suijten <marijn.suij...@somainline.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 5 +----
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h | 5 ++---
> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 ++
> 3 files changed, 5 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index bd37a56b4d03..b147f8814a18 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -743,10 +743,7 @@ static void _dpu_encoder_update_vsync_source(struct
> dpu_encoder_virt *dpu_enc,
> vsync_cfg.pp_count = dpu_enc->num_phys_encs;
> vsync_cfg.frame_rate =
> drm_mode_vrefresh(&dpu_enc->base.crtc->state->adjusted_mode);
>
> - if (disp_info->is_te_using_watchdog_timer)
> - vsync_cfg.vsync_source = DPU_VSYNC_SOURCE_WD_TIMER_0;
> - else
> - vsync_cfg.vsync_source = DPU_VSYNC_SOURCE_GPIO_0;
> + vsync_cfg.vsync_source = disp_info->vsync_source;
>
> hw_mdptop->ops.setup_vsync_source(hw_mdptop, &vsync_cfg);
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> index 76be77e30954..cb59bd4436f4 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> @@ -26,15 +26,14 @@
> * @h_tile_instance: Controller instance used per tile. Number of
> elements is
> * based on num_of_h_tiles
> * @is_cmd_mode Boolean to indicate if the CMD mode is requested
> - * @is_te_using_watchdog_timer: Boolean to indicate watchdog TE is
> - * used instead of panel TE in cmd mode panels
> + * @vsync_source: Source of the TE signal for DSI CMD devices
> */
> struct msm_display_info {
> enum dpu_intf_type intf_type;
> uint32_t num_of_h_tiles;
> uint32_t h_tile_instance[MAX_H_TILES_PER_DISPLAY];
> bool is_cmd_mode;
> - bool is_te_using_watchdog_timer;
> + enum dpu_vsync_source vsync_source;
> };
>
> /**
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index 1955848b1b78..e9991f3756d4 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -543,6 +543,8 @@ static int _dpu_kms_initialize_dsi(struct drm_device *dev,
>
> info.is_cmd_mode = msm_dsi_is_cmd_mode(priv->dsi[i]);
>
> + info.vsync_source = DPU_VSYNC_SOURCE_GPIO_0;
> +
> encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_DSI, &info);
> if (IS_ERR(encoder)) {
> DPU_ERROR("encoder init failed for dsi display\n");
>
> --
> 2.39.2
>
