Defer panel handling to drm_panel_bridge, unifying codepaths for the
panel and bridge cases. The MFD_SYSCON symbol is moved to select to
prevent Kconfig symbol loops.
Signed-off-by: Dmitry Baryshkov <dmitry.barysh...@linaro.org>
---
drivers/gpu/drm/imx/ipuv3/Kconfig | 6 +++--
drivers/gpu/drm/imx/ipuv3/imx-ldb.c | 44 ++++++++++++-------------------------
2 files changed, 18 insertions(+), 32 deletions(-)
diff --git a/drivers/gpu/drm/imx/ipuv3/Kconfig
b/drivers/gpu/drm/imx/ipuv3/Kconfig
index bacf0655ebaf..6abcf9c833d4 100644
--- a/drivers/gpu/drm/imx/ipuv3/Kconfig
+++ b/drivers/gpu/drm/imx/ipuv3/Kconfig
@@ -26,9 +26,11 @@ config DRM_IMX_TVE
config DRM_IMX_LDB
tristate "Support for LVDS displays"
- depends on DRM_IMX && MFD_SYSCON
+ depends on DRM_IMX
depends on COMMON_CLK
- select DRM_PANEL
+ select MFD_SYSCON
+ select DRM_BRIDGE
+ select DRM_PANEL_BRIDGE
help
Choose this to enable the internal LVDS Display Bridge (LDB)
found on i.MX53 and i.MX6 processors.
diff --git a/drivers/gpu/drm/imx/ipuv3/imx-ldb.c
b/drivers/gpu/drm/imx/ipuv3/imx-ldb.c
index 3f669604377e..bc7ad9697130 100644
--- a/drivers/gpu/drm/imx/ipuv3/imx-ldb.c
+++ b/drivers/gpu/drm/imx/ipuv3/imx-ldb.c
@@ -27,7 +27,6 @@
#include <drm/drm_bridge.h>
#include <drm/drm_managed.h>
#include <drm/drm_of.h>
-#include <drm/drm_panel.h>
#include <drm/drm_print.h>
#include <drm/drm_probe_helper.h>
#include <drm/drm_simple_kms_helper.h>
@@ -64,8 +63,6 @@ struct imx_ldb;
struct imx_ldb_channel {
struct imx_ldb *ldb;
- /* Defines what is connected to the ldb, only one at a time */
- struct drm_panel *panel;
struct drm_bridge *bridge;
struct device_node *child;
@@ -135,10 +132,6 @@ static int imx_ldb_connector_get_modes(struct
drm_connector *connector)
struct imx_ldb_channel *imx_ldb_ch = con_to_imx_ldb_ch(connector);
int num_modes;
- num_modes = drm_panel_get_modes(imx_ldb_ch->panel, connector);
- if (num_modes > 0)
- return num_modes;
-
if (imx_ldb_ch->mode_valid) {
struct drm_display_mode *mode;
@@ -193,8 +186,6 @@ static void imx_ldb_encoder_enable(struct drm_encoder
*encoder)
return;
}
- drm_panel_prepare(imx_ldb_ch->panel);
-
if (dual) {
clk_set_parent(ldb->clk_sel[mux], ldb->clk[0]);
clk_set_parent(ldb->clk_sel[mux], ldb->clk[1]);
@@ -233,8 +224,6 @@ static void imx_ldb_encoder_enable(struct drm_encoder
*encoder)
}
regmap_write(ldb->regmap, IOMUXC_GPR2, ldb->ldb_ctrl);
-
- drm_panel_enable(imx_ldb_ch->panel);
}
static void
@@ -311,8 +300,6 @@ static void imx_ldb_encoder_disable(struct drm_encoder
*encoder)
int dual = ldb->ldb_ctrl & LDB_SPLIT_MODE_EN;
int mux, ret;
- drm_panel_disable(imx_ldb_ch->panel);
-
if (imx_ldb_ch == &ldb->channel[0] || dual)
ldb->ldb_ctrl &= ~LDB_CH0_MODE_EN_MASK;
if (imx_ldb_ch == &ldb->channel[1] || dual)
@@ -346,8 +333,6 @@ static void imx_ldb_encoder_disable(struct drm_encoder
*encoder)
dev_err(ldb->dev,
"unable to set di%d parent clock to original parent\n",
mux);
-
- drm_panel_unprepare(imx_ldb_ch->panel);
}
static int imx_ldb_encoder_atomic_check(struct drm_encoder *encoder,
@@ -640,13 +625,15 @@ static int imx_ldb_probe(struct platform_device *pdev)
* The output port is port@4 with an external 4-port mux or
* port@2 with the internal 2-port mux.
*/
- ret = drm_of_find_panel_or_bridge(child,
- imx_ldb->lvds_mux ? 4 : 2, 0,
- &channel->panel,
&channel->bridge);
- if (ret && ret != -ENODEV)
- goto free_child;
+ channel->bridge = devm_drm_of_get_bridge(dev, child,
+ imx_ldb->lvds_mux ? 4 : 2, 0);
+ if (IS_ERR(channel->bridge)) {
+ ret = PTR_ERR(channel->bridge);
+ if (ret != -ENODEV)
+ goto free_child;
+
+ channel->bridge = NULL;
- if (!channel->bridge && !channel->panel) {
ret = of_get_drm_display_mode(child,
&channel->mode,
&channel->bus_flags,
@@ -658,15 +645,12 @@ static int imx_ldb_probe(struct platform_device *pdev)
}
bus_format = of_get_bus_format(dev, child);
- if (bus_format == -EINVAL) {
- /*
- * If no bus format was specified in the device tree,
- * we can still get it from the connected panel later.
- */
- if (channel->panel && channel->panel->funcs &&
- channel->panel->funcs->get_modes)
- bus_format = 0;
- }
+ /*
+ * If no bus format was specified in the device tree,
+ * we can still get it from the connected panel later.
+ */
+ if (bus_format == -EINVAL && channel->bridge)
+ bus_format = 0;
if (bus_format < 0) {
dev_err(dev, "could not determine data mapping: %d\n",
bus_format);
--
2.39.2
