The only information in the datasheet regarding this divider is a note
in SYS_PLLPARAM register documentation which states that when LSCLK is
270 MHz, LSCLK_DIV should be 1. What should LSCLK_DIV be set to when
LSCLK is 162 MHz (for DP 1.62G mode) is unclear, but empirical test
confirms using LSCLK_DIV 1 has no adverse effects either. In the worst
case, the internal TC358767 clock would run faster.
Signed-off-by: Marek Vasut <ma...@denx.de>
---
Cc: Andrzej Hajda <andrzej.ha...@intel.com>
Cc: Daniel Vetter <dan...@ffwll.ch>
Cc: David Airlie <airl...@gmail.com>
Cc: Jernej Skrabec <jernej.skra...@gmail.com>
Cc: Jonas Karlman <jo...@kwiboo.se>
Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Cc: Lucas Stach <l.st...@pengutronix.de>
Cc: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
Cc: Maxime Ripard <mrip...@kernel.org>
Cc: Neil Armstrong <neil.armstr...@linaro.org>
Cc: Robert Foss <rf...@kernel.org>
Cc: Thomas Zimmermann <tzimmerm...@suse.de>
Cc: dri-devel@lists.freedesktop.org
Cc: ker...@dh-electronics.com
---
drivers/gpu/drm/bridge/tc358767.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/tc358767.c
b/drivers/gpu/drm/bridge/tc358767.c
index 926921a8d29d7..156297131a6cc 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -738,7 +738,7 @@ static int tc_stream_clock_calc(struct tc_data *tc)
static int tc_set_syspllparam(struct tc_data *tc)
{
unsigned long rate;
- u32 pllparam = SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
+ u32 pllparam = SYSCLK_SEL_LSCLK | LSCLK_DIV_1;
rate = clk_get_rate(tc->refclk);
switch (rate) {
--
2.43.0
