On Wed, Mar 20, 2024 at 10:11:41PM +0200, Imre Deak wrote:
> Fix the calculation of the DSC line buffer depth. This is limited both
> by the source's and sink's maximum line buffer depth, but the former one
> was not taken into account. On all Intel platform's the source's maximum
> buffer depth is 13, so the overall limit is simply the minimum of the
> source/sink's limit, regardless of the DSC version.
>
> This leaves the DSI DSC line buffer depth calculation as-is, trusting
> VBT.
>
> On DSC version 1.2 for sinks reporting a maximum line buffer depth of 16
> the line buffer depth was incorrectly programmed as 0, leading to a
> corruption in color gradients / lines on the decompressed screen image.
>
> Cc: dri-devel@lists.freedesktop.org
> Signed-off-by: Imre Deak <imre.d...@intel.com>
Hi Maarten, Thomas, Maxime,
are you ok to merge the DRM DP-DSC/MST changes in patches 1, 7-9, 11 via
drm-intel-next?
--Imre
> ---
> drivers/gpu/drm/i915/display/intel_dp.c | 16 ++++++----------
> include/drm/display/drm_dsc.h | 3 ---
> 2 files changed, 6 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> b/drivers/gpu/drm/i915/display/intel_dp.c
> index af7ca00e9bc0a..dbe65651bf277 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -89,6 +89,9 @@
> #define DP_DSC_MAX_ENC_THROUGHPUT_0 340000
> #define DP_DSC_MAX_ENC_THROUGHPUT_1 400000
>
> +/* Max DSC line buffer depth supported by HW. */
> +#define INTEL_DP_DSC_MAX_LINE_BUF_DEPTH 13
> +
> /* DP DSC FEC Overhead factor in ppm = 1/(0.972261) = 1.028530 */
> #define DP_DSC_FEC_OVERHEAD_FACTOR 1028530
>
> @@ -1703,7 +1706,6 @@ static int intel_dp_dsc_compute_params(const struct
> intel_connector *connector,
> {
> struct drm_i915_private *i915 = to_i915(connector->base.dev);
> struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config;
> - u8 line_buf_depth;
> int ret;
>
> /*
> @@ -1732,20 +1734,14 @@ static int intel_dp_dsc_compute_params(const struct
> intel_connector *connector,
> connector->dp.dsc_dpcd[DP_DSC_DEC_COLOR_FORMAT_CAP -
> DP_DSC_SUPPORT] &
> DP_DSC_RGB;
>
> - line_buf_depth = drm_dp_dsc_sink_line_buf_depth(connector->dp.dsc_dpcd);
> - if (!line_buf_depth) {
> + vdsc_cfg->line_buf_depth = min(INTEL_DP_DSC_MAX_LINE_BUF_DEPTH,
> +
> drm_dp_dsc_sink_line_buf_depth(connector->dp.dsc_dpcd));
> + if (!vdsc_cfg->line_buf_depth) {
> drm_dbg_kms(&i915->drm,
> "DSC Sink Line Buffer Depth invalid\n");
> return -EINVAL;
> }
>
> - if (vdsc_cfg->dsc_version_minor == 2)
> - vdsc_cfg->line_buf_depth = (line_buf_depth ==
> DSC_1_2_MAX_LINEBUF_DEPTH_BITS) ?
> - DSC_1_2_MAX_LINEBUF_DEPTH_VAL : line_buf_depth;
> - else
> - vdsc_cfg->line_buf_depth = (line_buf_depth >
> DSC_1_1_MAX_LINEBUF_DEPTH_BITS) ?
> - DSC_1_1_MAX_LINEBUF_DEPTH_BITS : line_buf_depth;
> -
> vdsc_cfg->block_pred_enable =
> connector->dp.dsc_dpcd[DP_DSC_BLK_PREDICTION_SUPPORT -
> DP_DSC_SUPPORT] &
> DP_DSC_BLK_PREDICTION_IS_SUPPORTED;
> diff --git a/include/drm/display/drm_dsc.h b/include/drm/display/drm_dsc.h
> index bc90273d06a62..bbbe7438473d3 100644
> --- a/include/drm/display/drm_dsc.h
> +++ b/include/drm/display/drm_dsc.h
> @@ -40,9 +40,6 @@
> #define DSC_PPS_RC_RANGE_MINQP_SHIFT 11
> #define DSC_PPS_RC_RANGE_MAXQP_SHIFT 6
> #define DSC_PPS_NATIVE_420_SHIFT 1
> -#define DSC_1_2_MAX_LINEBUF_DEPTH_BITS 16
> -#define DSC_1_2_MAX_LINEBUF_DEPTH_VAL 0
> -#define DSC_1_1_MAX_LINEBUF_DEPTH_BITS 13
>
> /**
> * struct drm_dsc_rc_range_parameters - DSC Rate Control range parameters
> --
> 2.43.3
>
