[...]
> > @@ -215,34 +188,146 @@ static void blend(struct vkms_writeback_job *wb,
> > {
> > struct vkms_plane_state **plane = crtc_state->active_planes;
> > u32 n_active_planes = crtc_state->num_active_planes;
> > - int y_pos, x_dst, x_limit;
> >
> > const struct pixel_argb_u16 background_color = { .a = 0xffff };
> >
> > - size_t crtc_y_limit = crtc_state->base.crtc->mode.vdisplay;
> > + int crtc_y_limit = crtc_state->base.crtc->mode.vdisplay;
> > + int crtc_x_limit = crtc_state->base.crtc->mode.hdisplay;
> >
> > /*
> > * The planes are composed line-by-line to avoid heavy memory usage. It
> > is a necessary
> > * complexity to avoid poor blending performance.
> > *
> > - * The function vkms_compose_row is used to read a line,
> > pixel-by-pixel, into the staging
> > - * buffer.
> > + * The function pixel_read_line callback is used to read a line, using
> > an efficient
> > + * algorithm for a specific format, into the staging buffer.
> > */
> > for (size_t y = 0; y < crtc_y_limit; y++) {
> > fill_background(&background_color, output_buffer);
> >
> > /* The active planes are composed associatively in z-order. */
> > for (size_t i = 0; i < n_active_planes; i++) {
> > - x_dst = plane[i]->frame_info->dst.x1;
> > - x_limit = min_t(size_t,
> > drm_rect_width(&plane[i]->frame_info->dst),
> > - stage_buffer->n_pixels);
> > - y_pos = get_y_pos(plane[i]->frame_info, y);
> > + struct vkms_plane_state *current_plane = plane[i];
> >
> > - if (!check_limit(plane[i]->frame_info, y_pos))
> > + /* Avoid rendering useless lines */
> > + if (y < current_plane->frame_info->dst.y1 ||
> > + y >= current_plane->frame_info->dst.y2)
> > continue;
> >
> > - vkms_compose_row(stage_buffer, plane[i], y_pos);
> > - pre_mul_alpha_blend(stage_buffer, output_buffer, x_dst,
> > x_limit);
> > + /*
> > + * dst_line is the line to copy. The initial
> > coordinates are inside the
[...]
> > + */
> > + pixel_count = drm_rect_width(&src_line);
> > + if (x_start < 0) {
> > + pixel_count += x_start;
> > + x_start = 0;
> > + }
> > + if (x_start + pixel_count >
> > current_plane->frame_info->fb->width) {
> > + pixel_count =
> > +
> > (int)current_plane->frame_info->fb->width - x_start;
> > + }
> > + } else {
> > + /*
> > + * In vertical reading, the src_line height is
> > the number of pixel
> > + * to read
> > + */
> > + pixel_count = drm_rect_height(&src_line);
> > + if (y_start < 0) {
> > + pixel_count += y_start;
> > + y_start = 0;
> > + }
> > + if (y_start + pixel_count >
> > current_plane->frame_info->fb->height) {
> > + pixel_count =
> > +
> > (int)current_plane->frame_info->fb->width - y_start;
> > + }
>
> When you are clamping x_start or y_start or pixel_count to be inside
> the source FB, should you not equally adjust the destination
> coordinates as well?
I did not think about it. Currently it is not an issue and it will not
read or write outside a buffer because the pixel count is properly
limited. But indeed, there is an issue here. I will fix it in the v6.
> If we take a step back and look at the UAPI, I believe the answer is
> "no", but it's in no way obvious. It results from the combination of
> several facts:
>
> - UAPI checks reject any source rectangle that extends outside of the
> source FB.
>
> - The source rectangle stretches to fill the destination rectangle
> exactly.
>
> - VKMS does not support stretching (scaling), so its UAPI checks reject
> any commit with source and destination rectangles of different sizes
> after accounting for rotation. (Right?)
I don't know what are exactly the UAPI contract but as the dst can be
outside the CRTC, I assumed that the src can be outside the source plane.
After thinking it doesn't really make sense.
> I think this results in the clamping code being actually dead code.
> However, I would not delete the clamping code, because it is a cheap
> safety net in case something goes wrong.
If UAPI check that the source rectangle is inside the plane, yes it is
just a safety net. Otherwise, it is required to manage properly the
userspace requests. In the v6, the outside of a source buffer is
transparent.
> If you agree that it's just a safety net, then maybe explain that in a
> comment? If the safety net catches anything, the composition result
> will be wrong anyway, so it doesn't matter to adjust the destination
> rectangle to match.
I will extract this whole clamping stuff in a function, is this comment
enough?
* This function is mainly a safety net to avoid reading outside the source
buffer. As the
* userspace should never ask to read outside the source plane, all the cases
covered here should
* be dead code.
> When the last point is relaxed and VKMS gains scaling support, I think
> it won't change the fact that the clamping remains as a safety net. It
> just increases the risk of bugs that would be caught by the net.
>
> Going outside of FB boundaries is a serious bug and deserves to be
> checked. Going outside of the source rectangle would be a bug too,
> assuming that partially included pixels are considered fully included,
> but it's not serious enough to warrant explicit checks. Ideally IGT
> would catch it.
That was exactly the idea behind all those check and clamping: avoid
access outside the buffers.
> > + }
> > +
> > + if (pixel_count <= 0) {
> > + /* Nothing to read, so avoid multiple function
> > calls for nothing */
> > + continue;
> > + }
> > +
> > + /*
> > + * Modify the starting point to take in account the
> > rotation
> > + *
> > + * src_line is the top-left corner, so when reading
> > READ_RIGHT_TO_LEFT or
> > + * READ_BOTTOM_TO_TOP, it must be changed to the
> > top-right/bottom-left
> > + * corner.
> > + */
> > + if (direction == READ_RIGHT_TO_LEFT) {
> > + // x_start is now the right point
> > + x_start += pixel_count - 1;
> > + } else if (direction == READ_BOTTOM_TO_TOP) {
> > + // y_start is now the bottom point
> > + y_start += pixel_count - 1;
> > + }
> > +
> > + /*
> > + * Perform the conversion and the blending
> > + *
> > + * Here we know that the read line (x_start, y_start,
> > pixel_count) is
> > + * inside the source buffer [2] and we don't write
> > outside the stage
> > + * buffer [1]
> > + */
> > + current_plane->pixel_read_line(
> > + current_plane, x_start, y_start, direction,
> > pixel_count,
> > +
> > &stage_buffer->pixels[current_plane->frame_info->dst.x1]);
> > +
> > + pre_mul_alpha_blend(stage_buffer, output_buffer,
> > + current_plane->frame_info->dst.x1,
> > + pixel_count);
> > }
> >
> > apply_lut(crtc_state, output_buffer);
> > @@ -250,7 +335,7 @@ static void blend(struct vkms_writeback_job *wb,
> > *crc32 = crc32_le(*crc32, (void *)output_buffer->pixels,
> > row_size);
> >
> > if (wb)
> > - vkms_writeback_row(wb, output_buffer, y_pos);
> > + vkms_writeback_row(wb, output_buffer, y);
> > }
> > }
> >
> > @@ -261,7 +346,7 @@ static int check_format_funcs(struct vkms_crtc_state
> > *crtc_state,
> > u32 n_active_planes = crtc_state->num_active_planes;
> >
> > for (size_t i = 0; i < n_active_planes; i++)
> > - if (!planes[i]->pixel_read)
> > + if (!planes[i]->pixel_read_line)
> > return -1;
> >
> > if (active_wb && !active_wb->pixel_write)
> > diff --git a/drivers/gpu/drm/vkms/vkms_drv.h
> > b/drivers/gpu/drm/vkms/vkms_drv.h
> > index 985e7a92b7bc..23e1d247468d 100644
> > --- a/drivers/gpu/drm/vkms/vkms_drv.h
> > +++ b/drivers/gpu/drm/vkms/vkms_drv.h
> > @@ -39,7 +39,6 @@
> > struct vkms_frame_info {
> > struct drm_framebuffer *fb;
> > struct drm_rect src, dst;
> > - struct drm_rect rotated;
> > struct iosys_map map[DRM_FORMAT_MAX_PLANES];
> > unsigned int rotation;
> > };
> > @@ -80,26 +79,37 @@ enum pixel_read_direction {
> > READ_LEFT_TO_RIGHT
> > };
> >
> > +struct vkms_plane_state;
> > +
> > /**
> > - * typedef pixel_read_t - These functions are used to read a pixel in the
> > source frame,
> > + * typedef pixel_read_line_t - These functions are used to read a pixel
> > line in the source frame,
> > * convert it to `struct pixel_argb_u16` and write it to @out_pixel.
> > *
> > - * @in_pixel: Pointer to the pixel to read
> > - * @out_pixel: Pointer to write the converted pixel
> > + * @plane: Plane used as source for the pixel value
> > + * @x_start: X (width) coordinate of the first pixel to copy. The caller
> > must ensure that x_start
> > + * is positive and smaller than @plane->frame_info->fb->width.
> > + * @y_start: Y (width) coordinate of the first pixel to copy. The caller
> > must ensure that y_start
> > + * is positive and smaller than @plane->frame_info->fb->height.
>
> s/positive/non-negative/ because zero is valid too. At least, there is
> debate whether zero is positive or not, but non-negative is clear.
Edited in the v6.
> > + * @direction: Direction to use for the copy, starting at @x_start/@y_start
> > + * @count: Number of pixels to copy
> > + * @out_pixel: Pointer where to write the pixel values. They will be
> > written from @out_pixel[0]
> > + * to @out_pixel[@count]. The caller must ensure that out_pixel have a
> > length of at least @count.
> > */
> > -typedef void (*pixel_read_t)(const u8 *in_pixel, struct pixel_argb_u16
> > *out_pixel);
> > +typedef void (*pixel_read_line_t)(const struct vkms_plane_state *plane,
> > int x_start,
> > + int y_start, enum pixel_read_direction
> > direction, int count,
> > + struct pixel_argb_u16 out_pixel[]);
> >
> > /**
> > * vkms_plane_state - Driver specific plane state
> > * @base: base plane state
> > * @frame_info: data required for composing computation
> > - * @pixel_read: function to read a pixel in this plane. The creator of a
> > vkms_plane_state must
> > - * ensure that this pointer is valid
> > + * @pixel_read_line: function to read a pixel line in this plane. The
> > creator of a vkms_plane_state
> > + * must ensure that this pointer is valid
> > */
> > struct vkms_plane_state {
> > struct drm_shadow_plane_state base;
> > struct vkms_frame_info *frame_info;
> > - pixel_read_t pixel_read;
> > + pixel_read_line_t pixel_read_line;
> > };
> >
> > struct vkms_plane {
> > @@ -204,7 +214,6 @@ int vkms_verify_crc_source(struct drm_crtc *crtc, const
> > char *source_name,
> > /* Composer Support */
> > void vkms_composer_worker(struct work_struct *work);
> > void vkms_set_composer(struct vkms_output *out, bool enabled);
> > -void vkms_compose_row(struct line_buffer *stage_buffer, struct
> > vkms_plane_state *plane, int y);
> > void vkms_writeback_row(struct vkms_writeback_job *wb, const struct
> > line_buffer *src_buffer, int y);
> >
> > /* Writeback */
> > diff --git a/drivers/gpu/drm/vkms/vkms_formats.c
> > b/drivers/gpu/drm/vkms/vkms_formats.c
> > index 743b6fd06db5..1449a0e6c706 100644
> > --- a/drivers/gpu/drm/vkms/vkms_formats.c
> > +++ b/drivers/gpu/drm/vkms/vkms_formats.c
> > @@ -105,77 +105,45 @@ static int get_step_next_block(struct drm_framebuffer
> > *fb, enum pixel_read_direc
> > return 0;
> > }
> >
> > -static void *get_packed_src_addr(const struct vkms_frame_info *frame_info,
> > int y,
> > - int plane_index)
> > -{
> > - int x_src = frame_info->src.x1 >> 16;
> > - int y_src = y - frame_info->rotated.y1 + (frame_info->src.y1 >> 16);
> > - u8 *addr;
> > - int rem_x, rem_y;
> > -
> > - packed_pixels_addr(frame_info, x_src, y_src, plane_index, &addr,
> > &rem_x, &rem_y);
> > - return addr;
> > -}
> > -
> > -static int get_x_position(const struct vkms_frame_info *frame_info, int
> > limit, int x)
> > -{
> > - if (frame_info->rotation & (DRM_MODE_REFLECT_X | DRM_MODE_ROTATE_270))
> > - return limit - x - 1;
> > - return x;
> > -}
> > -
> > /*
> > - * The following functions take pixel data from the buffer and convert
> > them to the format
> > + * The following functions take pixel data (a, r, g, b, pixel, ...),
> > convert them to the format
> > * ARGB16161616 in out_pixel.
> > *
> > - * They are used in the `vkms_compose_row` function to handle multiple
> > formats.
> > + * They are used in the `read_line`s functions to avoid duplicate work for
> > some pixel formats.
> > */
> >
> > -static void ARGB8888_to_argb_u16(const u8 *in_pixel, struct pixel_argb_u16
> > *out_pixel)
> > +static struct pixel_argb_u16 argb_u16_from_u8888(int a, int r, int g, int
> > b)
> > {
> > + struct pixel_argb_u16 out_pixel;
> > /*
> > * The 257 is the "conversion ratio". This number is obtained by the
> > * (2^16 - 1) / (2^8 - 1) division. Which, in this case, tries to get
> > * the best color value in a pixel format with more possibilities.
> > * A similar idea applies to others RGB color conversions.
> > */
> > - out_pixel->a = (u16)in_pixel[3] * 257;
> > - out_pixel->r = (u16)in_pixel[2] * 257;
> > - out_pixel->g = (u16)in_pixel[1] * 257;
> > - out_pixel->b = (u16)in_pixel[0] * 257;
> > -}
> > + out_pixel.a = (u16)a * 257;
> > + out_pixel.r = (u16)r * 257;
> > + out_pixel.g = (u16)g * 257;
> > + out_pixel.b = (u16)b * 257;
> >
> > -static void XRGB8888_to_argb_u16(const u8 *in_pixel, struct pixel_argb_u16
> > *out_pixel)
> > -{
> > - out_pixel->a = (u16)0xffff;
> > - out_pixel->r = (u16)in_pixel[2] * 257;
> > - out_pixel->g = (u16)in_pixel[1] * 257;
> > - out_pixel->b = (u16)in_pixel[0] * 257;
> > + return out_pixel;
> > }
> >
> > -static void ARGB16161616_to_argb_u16(const u8 *in_pixel, struct
> > pixel_argb_u16 *out_pixel)
> > +static struct pixel_argb_u16 argb_u16_from_u16161616(int a, int r, int g,
> > int b)
> > {
> > - u16 *pixel = (u16 *)in_pixel;
> > + struct pixel_argb_u16 out_pixel;
> >
> > - out_pixel->a = le16_to_cpu(pixel[3]);
> > - out_pixel->r = le16_to_cpu(pixel[2]);
> > - out_pixel->g = le16_to_cpu(pixel[1]);
> > - out_pixel->b = le16_to_cpu(pixel[0]);
> > -}
> > + out_pixel.a = le16_to_cpu(a);
> > + out_pixel.r = le16_to_cpu(r);
> > + out_pixel.g = le16_to_cpu(g);
> > + out_pixel.b = le16_to_cpu(b);
> >
> > -static void XRGB16161616_to_argb_u16(const u8 *in_pixel, struct
> > pixel_argb_u16 *out_pixel)
> > -{
> > - u16 *pixel = (u16 *)in_pixel;
> > -
> > - out_pixel->a = (u16)0xffff;
> > - out_pixel->r = le16_to_cpu(pixel[2]);
> > - out_pixel->g = le16_to_cpu(pixel[1]);
> > - out_pixel->b = le16_to_cpu(pixel[0]);
> > + return out_pixel;
> > }
> >
> > -static void RGB565_to_argb_u16(const u8 *in_pixel, struct pixel_argb_u16
> > *out_pixel)
> > +static struct pixel_argb_u16 argb_u16_from_RGB565(const u16 *pixel)
> > {
> > - u16 *pixel = (u16 *)in_pixel;
> > + struct pixel_argb_u16 out_pixel;
> >
> > s64 fp_rb_ratio = drm_fixp_div(drm_int2fixp(65535), drm_int2fixp(31));
> > s64 fp_g_ratio = drm_fixp_div(drm_int2fixp(65535), drm_int2fixp(63));
> > @@ -185,12 +153,26 @@ static void RGB565_to_argb_u16(const u8 *in_pixel,
> > struct pixel_argb_u16 *out_pi
> > s64 fp_g = drm_int2fixp((rgb_565 >> 5) & 0x3f);
> > s64 fp_b = drm_int2fixp(rgb_565 & 0x1f);
> >
> > - out_pixel->a = (u16)0xffff;
> > - out_pixel->r = drm_fixp2int_round(drm_fixp_mul(fp_r, fp_rb_ratio));
> > - out_pixel->g = drm_fixp2int_round(drm_fixp_mul(fp_g, fp_g_ratio));
> > - out_pixel->b = drm_fixp2int_round(drm_fixp_mul(fp_b, fp_rb_ratio));
> > + out_pixel.a = (u16)0xffff;
> > + out_pixel.r = drm_fixp2int_round(drm_fixp_mul(fp_r, fp_rb_ratio));
> > + out_pixel.g = drm_fixp2int_round(drm_fixp_mul(fp_g, fp_g_ratio));
> > + out_pixel.b = drm_fixp2int_round(drm_fixp_mul(fp_b, fp_rb_ratio));
> > +
> > + return out_pixel;
> > }
> >
> > +/*
> > + * The following functions are read_line function for each pixel format
> > supported by VKMS.
> > + *
> > + * They read a line starting at the point @x_start,@y_start following the
> > @direction. The result
> > + * is stored in @out_pixel and in the format ARGB16161616.
> > + *
> > + * Those function are very similar, but it is required for performance
> > reason. In the past, some
> > + * experiment were done, and with a generic loop the performance are very
> > reduced [1].
>
> The English here feels a bit awkward. How about:
>
> These functions are very repetitive, but the innermost pixel loops must
> be kept inside these functions for performance reasons. Some
> benchmarking was done in [1] where having the innermost loop factored
> out of these functions showed a slowdown by a factor of three.
It is better, thanks.
> > + *
> > + * [1]:
> > https://lore.kernel.org/dri-devel/d258c8dc-78e9-4509-9037-a98f7f33b...@riseup.net/
> > + */
> > +
> > /**
> > * black_to_argb_u16() - pixel_read callback which always read black
> > *
> > @@ -198,42 +180,116 @@ static void RGB565_to_argb_u16(const u8 *in_pixel,
> > struct pixel_argb_u16 *out_pi
> > * It is used to avoid null pointer to be used as a function. In theory,
> > this function should
> > * never be called, except if you found a bug in the driver/DRM core.
> > */
> > +static void black_to_argb_u16(const struct vkms_plane_state *plane, int
> > x_start,
> > + int y_start, enum pixel_read_direction direction,
> > int count,
> > + struct pixel_argb_u16 out_pixel[])
> > {
> > + struct pixel_argb_u16 *end = out_pixel + count;
> > +
> > + while (out_pixel < end) {
> > + *out_pixel = argb_u16_from_u8888(255, 0, 0, 0);
> > + out_pixel += 1;
> > + }
> > }
> >
> > +static void ARGB8888_read_line(const struct vkms_plane_state *plane, int
> > x_start, int y_start,
> > + enum pixel_read_direction direction, int count,
> > + struct pixel_argb_u16 out_pixel[])
> > {
> > + struct pixel_argb_u16 *end = out_pixel + count;
> > + u8 *src_pixels;
> > + int rem_x, rem_y;
> > +
> > + packed_pixels_addr(plane->frame_info, x_start, y_start, 0, &src_pixels,
> > &rem_x, &rem_y);
> > +
> > + int step = get_step_next_block(plane->frame_info->fb, direction, 0);
> > +
> > + while (out_pixel < end) {
> > + u8 *px = (u8 *)src_pixels;
> > + *out_pixel = argb_u16_from_u8888(px[3], px[2], px[1], px[0]);
> > + out_pixel += 1;
> > + src_pixels += step;
> > + }
> > +}
> > +
> > +static void XRGB8888_read_line(const struct vkms_plane_state *plane, int
> > x_start, int y_start,
> > + enum pixel_read_direction direction, int count,
> > + struct pixel_argb_u16 out_pixel[])
> > +{
> > + struct pixel_argb_u16 *end = out_pixel + count;
> > + u8 *src_pixels;
> > + int rem_x, rem_y;
> > +
> > + packed_pixels_addr(plane->frame_info, x_start, y_start, 0, &src_pixels,
> > &rem_x, &rem_y);
> > +
> > + int step = get_step_next_block(plane->frame_info->fb, direction, 0);
> > +
> > + while (out_pixel < end) {
> > + u8 *px = (u8 *)src_pixels;
> > + *out_pixel = argb_u16_from_u8888(255, px[2], px[1], px[0]);
> > + out_pixel += 1;
> > + src_pixels += step;
> > + }
> > +}
> > +
> > +static void ARGB16161616_read_line(const struct vkms_plane_state *plane,
> > int x_start,
> > + int y_start, enum pixel_read_direction
> > direction, int count,
> > + struct pixel_argb_u16 out_pixel[])
> > +{
> > + struct pixel_argb_u16 *end = out_pixel + count;
> > + u8 *src_pixels;
> > + int rem_x, rem_y;
> > +
> > + packed_pixels_addr(plane->frame_info, x_start, y_start, 0, &src_pixels,
> > &rem_x, &rem_y);
> > +
> > + int step = get_step_next_block(plane->frame_info->fb, direction, 0);
> > +
> > + while (out_pixel < end) {
> > + u16 *px = (u16 *)src_pixels;
> > + *out_pixel = argb_u16_from_u16161616(px[3], px[2], px[1],
> > px[0]);
> > + out_pixel += 1;
> > + src_pixels += step;
> > + }
> > +}
> > +
> > +static void XRGB16161616_read_line(const struct vkms_plane_state *plane,
> > int x_start,
> > + int y_start, enum pixel_read_direction
> > direction, int count,
> > + struct pixel_argb_u16 out_pixel[])
> > +{
> > + struct pixel_argb_u16 *end = out_pixel + count;
> > + u8 *src_pixels;
> > + int rem_x, rem_y;
> > +
> > + packed_pixels_addr(plane->frame_info, x_start, y_start, 0, &src_pixels,
> > &rem_x, &rem_y);
> > +
> > + int step = get_step_next_block(plane->frame_info->fb, direction, 0);
> > +
> > + while (out_pixel < end) {
> > + u16 *px = (u16 *)src_pixels;
> > + *out_pixel = argb_u16_from_u16161616(0xFFFF, px[2], px[1],
> > px[0]);
> > + out_pixel += 1;
> > + src_pixels += step;
> > + }
> > +}
> > +
> > +static void RGB565_read_line(const struct vkms_plane_state *plane, int
> > x_start,
> > + int y_start, enum pixel_read_direction direction,
> > int count,
> > + struct pixel_argb_u16 out_pixel[])
> > +{
> > + struct pixel_argb_u16 *end = out_pixel + count;
> > + u8 *src_pixels;
> > + int rem_x, rem_y;
> > +
> > + packed_pixels_addr(plane->frame_info, x_start, y_start, 0, &src_pixels,
> > &rem_x, &rem_y);
> >
> > + int step = get_step_next_block(plane->frame_info->fb, direction, 0);
> >
> > + while (out_pixel < end) {
> > + u16 *px = (u16 *)src_pixels;
> >
> > + *out_pixel = argb_u16_from_RGB565(px);
> > + out_pixel += 1;
> > + src_pixels += step;
> > }
> > }
> >
> > @@ -343,25 +399,25 @@ void vkms_writeback_row(struct vkms_writeback_job *wb,
> > }
> >
> > /**
> > - * Retrieve the correct read_pixel function for a specific format.
> > + * Retrieve the correct read_line function for a specific format.
> > * If the format is not supported by VKMS a warn is emitted and a dummy
> > "always read black"
> > * function is returned.
> > *
> > * @format: DRM_FORMAT_* value for which to obtain a conversion function
> > (see [drm_fourcc.h])
> > */
> > -pixel_read_t get_pixel_read_function(u32 format)
> > +pixel_read_line_t get_pixel_read_line_function(u32 format)
> > {
> > switch (format) {
> > case DRM_FORMAT_ARGB8888:
> > - return &ARGB8888_to_argb_u16;
> > + return &ARGB8888_read_line;
> > case DRM_FORMAT_XRGB8888:
> > - return &XRGB8888_to_argb_u16;
> > + return &XRGB8888_read_line;
> > case DRM_FORMAT_ARGB16161616:
> > - return &ARGB16161616_to_argb_u16;
> > + return &ARGB16161616_read_line;
> > case DRM_FORMAT_XRGB16161616:
> > - return &XRGB16161616_to_argb_u16;
> > + return &XRGB16161616_read_line;
> > case DRM_FORMAT_RGB565:
> > - return &RGB565_to_argb_u16;
> > + return &RGB565_read_line;
> > default:
> > /*
> > * This is a bug in vkms_plane_atomic_check. All the supported
> > diff --git a/drivers/gpu/drm/vkms/vkms_formats.h
> > b/drivers/gpu/drm/vkms/vkms_formats.h
> > index 3ecea4563254..8d2bef95ff79 100644
> > --- a/drivers/gpu/drm/vkms/vkms_formats.h
> > +++ b/drivers/gpu/drm/vkms/vkms_formats.h
> > @@ -5,7 +5,7 @@
> >
> > #include "vkms_drv.h"
> >
> > -pixel_read_t get_pixel_read_function(u32 format);
> > +pixel_read_line_t get_pixel_read_line_function(u32 format);
> >
> > pixel_write_t get_pixel_write_function(u32 format);
> >
> > diff --git a/drivers/gpu/drm/vkms/vkms_plane.c
> > b/drivers/gpu/drm/vkms/vkms_plane.c
> > index 10e9b23dab28..8875bed76410 100644
> > --- a/drivers/gpu/drm/vkms/vkms_plane.c
> > +++ b/drivers/gpu/drm/vkms/vkms_plane.c
> > @@ -112,7 +112,6 @@ static void vkms_plane_atomic_update(struct drm_plane
> > *plane,
> > frame_info = vkms_plane_state->frame_info;
> > memcpy(&frame_info->src, &new_state->src, sizeof(struct drm_rect));
> > memcpy(&frame_info->dst, &new_state->dst, sizeof(struct drm_rect));
> > - memcpy(&frame_info->rotated, &new_state->dst, sizeof(struct drm_rect));
> > frame_info->fb = fb;
> > memcpy(&frame_info->map, &shadow_plane_state->data,
> > sizeof(frame_info->map));
> > drm_framebuffer_get(frame_info->fb);
> > @@ -122,10 +121,8 @@ static void vkms_plane_atomic_update(struct drm_plane
> > *plane,
> >
> > DRM_MODE_REFLECT_X |
> >
> > DRM_MODE_REFLECT_Y);
> >
> > - drm_rect_rotate(&frame_info->rotated,
> > drm_rect_width(&frame_info->rotated),
> > - drm_rect_height(&frame_info->rotated),
> > frame_info->rotation);
> >
> > - vkms_plane_state->pixel_read = get_pixel_read_function(fmt);
> > + vkms_plane_state->pixel_read_line = get_pixel_read_line_function(fmt);
> > }
> >
> > static int vkms_plane_atomic_check(struct drm_plane *plane,
> >
>
> This is looking good enough that I can give an
Thanks for all your feedback !
> Acked-by: Pekka Paalanen <pekka.paala...@collabora.com>
As I changed the code, I will not keep it in the commit.
Thanks,
Louis Chauvet
> Thanks,
> pq
--
Louis Chauvet, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
