Le 04/01/2024 à 13:41, Quentin Schulz a écrit :
From: Quentin Schulz <quentin.sch...@theobroma-systems.com>
This is only a cosmetic change.
This replaces a hand-crafted EPROBE_DEFER handling for deciding to print
an error message with dev_err_probe.
A side-effect is that dev_err_probe also adds a debug message when it's
not EPROBE_DEFER, but this is seen as an improvement.
Cc: Quentin Schulz <foss+ker...@0leil.net>
Signed-off-by: Quentin Schulz <quentin.sch...@theobroma-systems.com>
Reviewed-by: Christophe JAILLET <christophe.jail...@wanadoo.fr>
---
drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c | 17 +++++------------
1 file changed, 5 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
index ecfa4181c4fd9..9d87cc1a357e3 100644
--- a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
+++ b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
@@ -650,20 +650,13 @@ static int ltk050h3146w_probe(struct mipi_dsi_device *dsi)
return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), "cannot get
reset gpio\n");
ctx->vci = devm_regulator_get(dev, "vci");
- if (IS_ERR(ctx->vci)) {
- ret = PTR_ERR(ctx->vci);
- if (ret != -EPROBE_DEFER)
- dev_err(dev, "Failed to request vci regulator: %d\n",
ret);
- return ret;
- }
+ if (IS_ERR(ctx->vci))
+ return dev_err_probe(dev, PTR_ERR(ctx->vci), "Failed to request vci
regulator\n");
ctx->iovcc = devm_regulator_get(dev, "iovcc");
- if (IS_ERR(ctx->iovcc)) {
- ret = PTR_ERR(ctx->iovcc);
- if (ret != -EPROBE_DEFER)
- dev_err(dev, "Failed to request iovcc regulator: %d\n",
ret);
- return ret;
- }
+ if (IS_ERR(ctx->iovcc))
+ return dev_err_probe(dev, PTR_ERR(ctx->iovcc),
+ "Failed to request iovcc regulator\n");
mipi_dsi_set_drvdata(dsi, ctx);
