Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.

Add mod_devicetable.h include.

Signed-off-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>
---
 drivers/video/backlight/mp3309c.c | 38 ++++++++++++-------------------
 1 file changed, 15 insertions(+), 23 deletions(-)

diff --git a/drivers/video/backlight/mp3309c.c 
b/drivers/video/backlight/mp3309c.c
index 34d71259fac1..d9b08f191999 100644
--- a/drivers/video/backlight/mp3309c.c
+++ b/drivers/video/backlight/mp3309c.c
@@ -15,6 +15,8 @@
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
 #include <linux/pwm.h>
 #include <linux/regmap.h>
 
@@ -202,15 +204,12 @@ static const struct backlight_ops mp3309c_bl_ops = {
 static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
                                 struct mp3309c_platform_data *pdata)
 {
-       struct device_node *node = chip->dev->of_node;
-       struct property *prop_pwms;
-       struct property *prop_levels = NULL;
-       int length = 0;
        int ret, i;
        unsigned int num_levels, tmp_value;
+       struct device *dev = chip->dev;
 
-       if (!node) {
-               dev_err(chip->dev, "failed to get DT node\n");
+       if (!dev_fwnode(dev)) {
+               dev_err(dev, "failed to get firmware node\n");
                return -ENODEV;
        }
 
@@ -224,8 +223,7 @@ static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
         * found in the backlight node, the mode switches to PWM mode.
         */
        pdata->dimming_mode = DIMMING_ANALOG_I2C;
-       prop_pwms = of_find_property(node, "pwms", &length);
-       if (prop_pwms) {
+       if (device_property_present(dev, "pwms")) {
                chip->pwmd = devm_pwm_get(chip->dev, NULL);
                if (IS_ERR(chip->pwmd))
                        return dev_err_probe(chip->dev, PTR_ERR(chip->pwmd),
@@ -257,11 +255,9 @@ static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
                /*
                 * PWM control mode: check for brightness level in DT
                 */
-               prop_levels = of_find_property(node, "brightness-levels",
-                                              &length);
-               if (prop_levels) {
+               if (device_property_present(dev, "brightness-levels")) {
                        /* Read brightness levels from DT */
-                       num_levels = length / sizeof(u32);
+                       num_levels = device_property_count_u32(dev, 
"brightness-levels");
                        if (num_levels < 2)
                                return -EINVAL;
                } else {
@@ -275,10 +271,9 @@ static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
                                     sizeof(*pdata->levels), GFP_KERNEL);
        if (!pdata->levels)
                return -ENOMEM;
-       if (prop_levels) {
-               ret = of_property_read_u32_array(node, "brightness-levels",
-                                                pdata->levels,
-                                                num_levels);
+       if (device_property_present(dev, "brightness-levels")) {
+               ret = device_property_read_u32_array(dev, "brightness-levels",
+                                                    pdata->levels, num_levels);
                if (ret < 0)
                        return ret;
        } else {
@@ -288,8 +283,7 @@ static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
 
        pdata->max_brightness = num_levels - 1;
 
-       ret = of_property_read_u32(node, "default-brightness",
-                                  &pdata->default_brightness);
+       ret = device_property_read_u32(dev, "default-brightness", 
&pdata->default_brightness);
        if (ret)
                pdata->default_brightness = pdata->max_brightness;
        if (pdata->default_brightness > pdata->max_brightness) {
@@ -310,8 +304,8 @@ static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
         * If missing, the default value for OVP is 35.5V
         */
        pdata->over_voltage_protection = REG_I2C_1_OVP1;
-       if (!of_property_read_u32(node, "mps,overvoltage-protection-microvolt",
-                                 &tmp_value)) {
+       ret = device_property_read_u32(dev, 
"mps,overvoltage-protection-microvolt", &tmp_value);
+       if (!ret) {
                switch (tmp_value) {
                case 13500000:
                        pdata->over_voltage_protection = 0x00;
@@ -328,9 +322,7 @@ static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
        }
 
        /* Synchronous (default) and non-synchronous mode */
-       pdata->sync_mode = true;
-       if (of_property_read_bool(node, "mps,no-sync-mode"))
-               pdata->sync_mode = false;
+       pdata->sync_mode = !device_property_read_bool(dev, "mps,no-sync-mode");
 
        return 0;
 }
-- 
2.43.0.rc1.1.gbec44491f096

Reply via email to