Hi Heiko:
On 12/9/23 00:26, Heiko Stübner wrote:
Hi Andy,
Am Donnerstag, 7. Dezember 2023, 09:02:47 CET schrieb Andy Yan:
From: Andy Yan <andy....@rock-chips.com>
Add vop dt node for rk3588.
Signed-off-by: Andy Yan <andy....@rock-chips.com>
---
(no changes since v1)
arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 96 +++++++++++++++++++++++
1 file changed, 96 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 7064c0e9179f..a9810ca78dc4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -593,6 +608,87 @@ i2c0: i2c@fd880000 {
status = "disabled";
};
+ vop: vop@fdd90000 {
+ compatible = "rockchip,rk3588-vop";
+ reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>;
+ reg-names = "vop", "gamma_lut";
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_VOP>,
+ <&cru HCLK_VOP>,
+ <&cru DCLK_VOP0>,
+ <&cru DCLK_VOP1>,
+ <&cru DCLK_VOP2>,
+ <&cru DCLK_VOP3>,
+ <&cru PCLK_VOP_ROOT>;
+ clock-names = "aclk",
+ "hclk",
+ "dclk_vp0",
+ "dclk_vp1",
+ "dclk_vp2",
+ "dclk_vp3",
+ "pclk_vop";
+ resets = <&cru SRST_A_VOP>,
+ <&cru SRST_H_VOP>,
+ <&cru SRST_D_VOP0>,
+ <&cru SRST_D_VOP1>,
+ <&cru SRST_D_VOP2>,
+ <&cru SRST_D_VOP3>;
+ reset-names = "axi",
+ "ahb",
+ "dclk_vp0",
+ "dclk_vp1",
+ "dclk_vp2",
+ "dclk_vp3";
resets and reset-names do not seem to be part of the binding, so
should probably be added there.
I will drop resets and reset-names in next version.
+ iommus = <&vop_mmu>;
+ power-domains = <&power RK3588_PD_VOP>;
+ rockchip,grf = <&sys_grf>;
+ rockchip,vop-grf = <&vop_grf>;
+ rockchip,vo1-grf = <&vo1_grf>;
+ rockchip,pmu = <&pmu>;
+
move this blank line _below_ the status=disabled please.
ok, will do.
+ status = "disabled";
+ vop_out: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vp0: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ vp1: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ vp2: port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ vp3: port@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+ };
+
+ vop_mmu: iommu@fdd97e00 {
+ compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+ reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "vop_mmu";
interrupt-names is not part of the mainline iommu binding, so should be dropped
will do.
Thanks
Heiko
