Add support for Ampire AM8001280G LCD panels to the Ilitek ILI9881C
driver.
Also set prepare_prev_first, to make sure that the DSI host controller
is initialized to LP-11 before the panel is powered up. Tested to work
with samsung-dsim on i.MX8MM after commit 0c14d3130654 ("drm: bridge:
samsung-dsim: Fix i.MX8M enable flow to meet spec").
To: Neil Armstrong <[email protected]>
To: Jessica Zhang <[email protected]>
To: Sam Ravnborg <[email protected]>
To: Maarten Lankhorst <[email protected]>
To: Maxime Ripard <[email protected]>
To: Thomas Zimmermann <[email protected]>
To: David Airlie <[email protected]>
To: Daniel Vetter <[email protected]>
To: Rob Herring <[email protected]>
To: Krzysztof Kozlowski <[email protected]>
To: Conor Dooley <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: Marco Felsch <[email protected]>
Cc: [email protected]
Signed-off-by: Philipp Zabel <[email protected]>
---
Marco Felsch (1):
drm/panel: ilitek-ili9881c: make use of prepare_prev_first
Philipp Zabel (2):
dt-bindings: ili9881c: Add Ampire AM8001280G LCD panel
drm/panel: ilitek-ili9881c: Add Ampire AM8001280G LCD panel
.../bindings/display/panel/ilitek,ili9881c.yaml | 1 +
drivers/gpu/drm/panel/panel-ilitek-ili9881c.c | 225 +++++++++++++++++++++
2 files changed, 226 insertions(+)
---
base-commit: e4d983acffff270ccee417445a69b9ed198658b1
change-id: 20231123-drm-panel-ili9881c-am8001280g-d2e2f4b30a2e
Best regards,
--
Philipp Zabel <[email protected]>
