On 30.10.23 20:28, Aradhya Bhatia wrote: > With new connector model, tc358767 will not create the connector, when > DRM_BRIDGE_ATTACH_NO_CONNECTOR is set and display-controller driver will > rely on format negotiation to setup the encoder format. > > Add the missing input-format negotiation hook in the > drm_bridge_funcs to complete DRM_BRIDGE_ATTACH_NO_CONNECTOR support. > > Input format is selected to MEDIA_BUS_FMT_RGB888_1X24 as default, as is > the case with older model. > > Reported-by: Jan Kiszka <jan.kis...@siemens.com> > Signed-off-by: Aradhya Bhatia <a-bhat...@ti.com> > --- > > Notes: > > * Since I do not have hardware with me, this was just build tested. I would > appreciate it if someone could test and review it, especically somebody, > who > uses the bridge for DPI/DSI to eDP format conversion. > > * The Toshiba TC358767 bridge is not enabled in arm64 defconfig by default, > when it should be. Hence, I sent a quick patch[0] earlier. > > [0]: https://lore.kernel.org/all/20231030152834.18450-1-a-bhat...@ti.com/ > > drivers/gpu/drm/bridge/tc358767.c | 25 +++++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > > diff --git a/drivers/gpu/drm/bridge/tc358767.c > b/drivers/gpu/drm/bridge/tc358767.c > index ef2e373606ba..0affcefdeb1c 100644 > --- a/drivers/gpu/drm/bridge/tc358767.c > +++ b/drivers/gpu/drm/bridge/tc358767.c > @@ -1751,6 +1751,30 @@ tc_dpi_atomic_get_input_bus_fmts(struct drm_bridge > *bridge, > return input_fmts; > } > > +static u32 * > +tc_edp_atomic_get_input_bus_fmts(struct drm_bridge *bridge, > + struct drm_bridge_state *bridge_state, > + struct drm_crtc_state *crtc_state, > + struct drm_connector_state *conn_state, > + u32 output_fmt, > + unsigned int *num_input_fmts) > +{ > + u32 *input_fmts; > + > + *num_input_fmts = 0; > + > + input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts), > + GFP_KERNEL); > + if (!input_fmts) > + return NULL; > + > + /* This is the DSI/DPI-end bus format */ > + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24; > + *num_input_fmts = 1; > + > + return input_fmts; > +} > + > static const struct drm_bridge_funcs tc_dpi_bridge_funcs = { > .attach = tc_dpi_bridge_attach, > .mode_valid = tc_dpi_mode_valid, > @@ -1777,6 +1801,7 @@ static const struct drm_bridge_funcs > tc_edp_bridge_funcs = { > .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, > .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, > .atomic_reset = drm_atomic_helper_bridge_reset, > + .atomic_get_input_bus_fmts = tc_edp_atomic_get_input_bus_fmts, > }; > > static bool tc_readable_reg(struct device *dev, unsigned int reg) > > base-commit: c503e3eec382ac708ee7adf874add37b77c5d312
Doesn't help, callback is never invoked. There must be more missing. Regarding test setup: Maybe your colleague Preneeth can help to give you access, he just received some devices from us. Otherwise, drop me instrumentation patches. Jan -- Siemens AG, Technology Linux Expert Center
