The Solomon SSD132x controllers (such as the SSD1322, SSD1325 and SSD1327)
are used by 16 grayscale dot matrix OLED panels, extend the driver to also
support this chip family.
Signed-off-by: Javier Martinez Canillas <javi...@redhat.com>
---
Changes in v2:
- Align the rectangle to the segment width (Geert Uytterhoeven).
drivers/gpu/drm/solomon/Kconfig | 12 +-
drivers/gpu/drm/solomon/ssd130x-i2c.c | 17 +-
drivers/gpu/drm/solomon/ssd130x-spi.c | 21 ++-
drivers/gpu/drm/solomon/ssd130x.c | 234 +++++++++++++++++++++++++-
drivers/gpu/drm/solomon/ssd130x.h | 4 +
5 files changed, 275 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/solomon/Kconfig b/drivers/gpu/drm/solomon/Kconfig
index e170716d976b..c3ee956c2bb9 100644
--- a/drivers/gpu/drm/solomon/Kconfig
+++ b/drivers/gpu/drm/solomon/Kconfig
@@ -1,31 +1,31 @@
config DRM_SSD130X
- tristate "DRM support for Solomon SSD130x OLED displays"
+ tristate "DRM support for Solomon SSD13xx OLED displays"
depends on DRM && MMU
select BACKLIGHT_CLASS_DEVICE
select DRM_GEM_SHMEM_HELPER
select DRM_KMS_HELPER
help
- DRM driver for the SSD130x Solomon and SINO WEALTH SH110x OLED
+ DRM driver for the SSD13xx Solomon and SINO WEALTH SH110x OLED
controllers. This is only for the core driver, a driver for the
appropriate bus transport in your chip also must be selected.
If M is selected the module will be called ssd130x.
config DRM_SSD130X_I2C
- tristate "DRM support for Solomon SSD130x OLED displays (I2C bus)"
+ tristate "DRM support for Solomon SSD13xx OLED displays (I2C bus)"
depends on DRM_SSD130X && I2C
select REGMAP_I2C
help
- Say Y here if the SSD130x or SH110x OLED display is connected via
+ Say Y here if the SSD13xx or SH110x OLED display is connected via
I2C bus.
If M is selected the module will be called ssd130x-i2c.
config DRM_SSD130X_SPI
- tristate "DRM support for Solomon SSD130X OLED displays (SPI bus)"
+ tristate "DRM support for Solomon SSD13xx OLED displays (SPI bus)"
depends on DRM_SSD130X && SPI
select REGMAP
help
- Say Y here if the SSD130x OLED display is connected via SPI bus.
+ Say Y here if the SSD13xx OLED display is connected via SPI bus.
If M is selected the module will be called ssd130x-spi.
diff --git a/drivers/gpu/drm/solomon/ssd130x-i2c.c
b/drivers/gpu/drm/solomon/ssd130x-i2c.c
index 8f89b89d553f..f2ccab9c06d9 100644
--- a/drivers/gpu/drm/solomon/ssd130x-i2c.c
+++ b/drivers/gpu/drm/solomon/ssd130x-i2c.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * DRM driver for Solomon SSD130x OLED displays (I2C bus)
+ * DRM driver for Solomon SSD13xx OLED displays (I2C bus)
*
* Copyright 2022 Red Hat Inc.
* Author: Javier Martinez Canillas <javi...@redhat.com>
@@ -14,7 +14,7 @@
#include "ssd130x.h"
#define DRIVER_NAME "ssd130x-i2c"
-#define DRIVER_DESC "DRM driver for Solomon SSD130x OLED displays (I2C)"
+#define DRIVER_DESC "DRM driver for Solomon SSD13xx OLED displays (I2C)"
static const struct regmap_config ssd130x_i2c_regmap_config = {
.reg_bits = 8,
@@ -92,6 +92,19 @@ static const struct of_device_id ssd130x_of_match[] = {
.compatible = "solomon,ssd1309fb-i2c",
.data = &ssd130x_variants[SSD1309_ID],
},
+ /* ssd132x family */
+ {
+ .compatible = "solomon,ssd1322",
+ .data = &ssd130x_variants[SSD1322_ID],
+ },
+ {
+ .compatible = "solomon,ssd1325",
+ .data = &ssd130x_variants[SSD1325_ID],
+ },
+ {
+ .compatible = "solomon,ssd1327",
+ .data = &ssd130x_variants[SSD1327_ID],
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, ssd130x_of_match);
diff --git a/drivers/gpu/drm/solomon/ssd130x-spi.c
b/drivers/gpu/drm/solomon/ssd130x-spi.c
index 89989da705d7..84e035a7ab3f 100644
--- a/drivers/gpu/drm/solomon/ssd130x-spi.c
+++ b/drivers/gpu/drm/solomon/ssd130x-spi.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * DRM driver for Solomon SSD130X OLED displays (SPI bus)
+ * DRM driver for Solomon SSD13xx OLED displays (SPI bus)
*
* Copyright 2022 Red Hat Inc.
* Authors: Javier Martinez Canillas <javi...@redhat.com>
@@ -11,7 +11,7 @@
#include "ssd130x.h"
#define DRIVER_NAME "ssd130x-spi"
-#define DRIVER_DESC "DRM driver for Solomon SSD130X OLED displays (SPI)"
+#define DRIVER_DESC "DRM driver for Solomon SSD13xx OLED displays (SPI)"
struct ssd130x_spi_transport {
struct spi_device *spi;
@@ -129,6 +129,19 @@ static const struct of_device_id ssd130x_of_match[] = {
.compatible = "solomon,ssd1309",
.data = &ssd130x_variants[SSD1309_ID],
},
+ /* ssd132x family */
+ {
+ .compatible = "solomon,ssd1322",
+ .data = &ssd130x_variants[SSD1322_ID],
+ },
+ {
+ .compatible = "solomon,ssd1325",
+ .data = &ssd130x_variants[SSD1325_ID],
+ },
+ {
+ .compatible = "solomon,ssd1327",
+ .data = &ssd130x_variants[SSD1327_ID],
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, ssd130x_of_match);
@@ -149,6 +162,10 @@ static const struct spi_device_id ssd130x_spi_table[] = {
{ "ssd1306", SSD1306_ID },
{ "ssd1307", SSD1307_ID },
{ "ssd1309", SSD1309_ID },
+ /* ssd132x family */
+ { "ssd1322", SSD1322_ID },
+ { "ssd1325", SSD1325_ID },
+ { "ssd1327", SSD1327_ID },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(spi, ssd130x_spi_table);
diff --git a/drivers/gpu/drm/solomon/ssd130x.c
b/drivers/gpu/drm/solomon/ssd130x.c
index 4bdc06d6aed4..94a6a6ebd6e8 100644
--- a/drivers/gpu/drm/solomon/ssd130x.c
+++ b/drivers/gpu/drm/solomon/ssd130x.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * DRM driver for Solomon SSD130x OLED displays
+ * DRM driver for Solomon SSD13xx OLED displays
*
* Copyright 2022 Red Hat Inc.
* Author: Javier Martinez Canillas <javi...@redhat.com>
@@ -37,13 +37,15 @@
#include "ssd130x.h"
#define DRIVER_NAME "ssd130x"
-#define DRIVER_DESC "DRM driver for Solomon SSD130x OLED displays"
+#define DRIVER_DESC "DRM driver for Solomon SSD13xx OLED displays"
#define DRIVER_DATE "20220131"
#define DRIVER_MAJOR 1
#define DRIVER_MINOR 0
#define SSD130X_PAGE_HEIGHT 8
+#define SSD132X_SEGMENT_WIDTH 2
+
/* ssd13xx commands */
#define SSD13XX_CONTRAST 0x81
#define SSD13XX_SET_SEG_REMAP 0xa0
@@ -99,10 +101,29 @@
#define SSD130X_SET_AREA_COLOR_MODE_ENABLE 0x1e
#define SSD130X_SET_AREA_COLOR_MODE_LOW_POWER 0x05
+/* ssd132x commands */
+#define SSD132X_SET_COL_RANGE 0x15
+#define SSD132X_SET_DEACTIVATE_SCROLL 0x2e
+#define SSD132X_SET_ROW_RANGE 0x75
+#define SSD132X_SET_DISPLAY_START 0xa1
+#define SSD132X_SET_DISPLAY_OFFSET 0xa2
+#define SSD132X_SET_DISPLAY_NORMAL 0xa4
+#define SSD132X_SET_FUNCTION_SELECT_A 0xab
+#define SSD132X_SET_PHASE_LENGTH 0xb1
+#define SSD132X_SET_CLOCK_FREQ 0xb3
+#define SSD132X_SET_GPIO 0xb5
+#define SSD132X_SET_PRECHARGE_PERIOD 0xb6
+#define SSD132X_SET_GRAY_SCALE_TABLE 0xb8
+#define SSD132X_SELECT_DEFAULT_TABLE 0xb9
+#define SSD132X_SET_PRECHARGE_VOLTAGE 0xbc
+#define SSD130X_SET_VCOMH_VOLTAGE 0xbe
+#define SSD132X_SET_FUNCTION_SELECT_B 0xd5
+
#define MAX_CONTRAST 255
enum ssd130x_family_ids {
- SSD130X_FAMILY
+ SSD130X_FAMILY,
+ SSD132X_FAMILY
};
static const struct ssd130x_funcs ssd130x_family_funcs[];
@@ -150,6 +171,22 @@ const struct ssd130x_deviceinfo ssd130x_variants[] = {
.default_width = 128,
.default_height = 64,
.funcs = &ssd130x_family_funcs[SSD130X_FAMILY],
+ },
+ /* ssd132x family */
+ [SSD1322_ID] = {
+ .default_width = 480,
+ .default_height = 128,
+ .funcs = &ssd130x_family_funcs[SSD132X_FAMILY],
+ },
+ [SSD1325_ID] = {
+ .default_width = 128,
+ .default_height = 80,
+ .funcs = &ssd130x_family_funcs[SSD132X_FAMILY],
+ },
+ [SSD1327_ID] = {
+ .default_width = 128,
+ .default_height = 128,
+ .funcs = &ssd130x_family_funcs[SSD132X_FAMILY],
}
};
EXPORT_SYMBOL_NS_GPL(ssd130x_variants, DRM_SSD130X);
@@ -643,6 +680,189 @@ static void ssd130x_clear_screen(struct ssd130x_device
*ssd130x, u8 *data_array)
}
}
+static int ssd132x_init(struct ssd130x_device *ssd130x)
+{
+ int ret;
+
+ /* Set initial contrast */
+ ret = ssd130x_write_cmd(ssd130x, 2, SSD13XX_CONTRAST, 0x80);
+ if (ret < 0)
+ return ret;
+
+ /* Set column start and end */
+ ret = ssd130x_write_cmd(ssd130x, 3, SSD132X_SET_COL_RANGE, 0x00,
+ ssd130x->width / SSD132X_SEGMENT_WIDTH - 1);
+ if (ret < 0)
+ return ret;
+
+ /* Set row start and end */
+ ret = ssd130x_write_cmd(ssd130x, 3, SSD132X_SET_ROW_RANGE, 0x00,
ssd130x->height - 1);
+ if (ret < 0)
+ return ret;
+ /*
+ * Horizontal Address Increment
+ * Re-map for Column Address, Nibble and COM
+ * COM Split Odd Even
+ */
+ ret = ssd130x_write_cmd(ssd130x, 2, SSD13XX_SET_SEG_REMAP, 0x53);
+ if (ret < 0)
+ return ret;
+
+ /* Set display start and offset */
+ ret = ssd130x_write_cmd(ssd130x, 2, SSD132X_SET_DISPLAY_START, 0x00);
+ if (ret < 0)
+ return ret;
+
+ ret = ssd130x_write_cmd(ssd130x, 2, SSD132X_SET_DISPLAY_OFFSET, 0x00);
+ if (ret < 0)
+ return ret;
+
+ /* Set display mode normal */
+ ret = ssd130x_write_cmd(ssd130x, 1, SSD132X_SET_DISPLAY_NORMAL);
+ if (ret < 0)
+ return ret;
+
+ /* Set multiplex ratio value */
+ ret = ssd130x_write_cmd(ssd130x, 2, SSD13XX_SET_MULTIPLEX_RATIO,
ssd130x->height - 1);
+ if (ret < 0)
+ return ret;
+
+ /* Set phase length */
+ ret = ssd130x_write_cmd(ssd130x, 2, SSD132X_SET_PHASE_LENGTH, 0x55);
+ if (ret < 0)
+ return ret;
+
+ /* Select default linear gray scale table */
+ ret = ssd130x_write_cmd(ssd130x, 1, SSD132X_SELECT_DEFAULT_TABLE);
+ if (ret < 0)
+ return ret;
+
+ /* Set clock frequency */
+ ret = ssd130x_write_cmd(ssd130x, 2, SSD132X_SET_CLOCK_FREQ, 0x01);
+ if (ret < 0)
+ return ret;
+
+ /* Enable internal VDD regulator */
+ ret = ssd130x_write_cmd(ssd130x, 2, SSD132X_SET_FUNCTION_SELECT_A, 0x1);
+ if (ret < 0)
+ return ret;
+
+ /* Set pre-charge period */
+ ret = ssd130x_write_cmd(ssd130x, 2, SSD132X_SET_PRECHARGE_PERIOD, 0x01);
+ if (ret < 0)
+ return ret;
+
+ /* Set pre-charge voltage */
+ ret = ssd130x_write_cmd(ssd130x, 2, SSD132X_SET_PRECHARGE_VOLTAGE,
0x08);
+ if (ret < 0)
+ return ret;
+
+ /* Set VCOMH voltage */
+ ret = ssd130x_write_cmd(ssd130x, 2, SSD130X_SET_VCOMH_VOLTAGE, 0x07);
+ if (ret < 0)
+ return ret;
+
+ /* Enable second pre-charge and internal VSL */
+ ret = ssd130x_write_cmd(ssd130x, 2, SSD132X_SET_FUNCTION_SELECT_B,
0x62);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int ssd132x_set_buffer_sizes(struct ssd130x_device *ssd130x)
+{
+ unsigned int buffer_pitch;
+ unsigned int columns = DIV_ROUND_UP(ssd130x->width,
SSD132X_SEGMENT_WIDTH);
+ unsigned int rows = ssd130x->height;
+
+ ssd130x->data_array_size = columns * rows;
+
+ ssd130x->buffer_fi = drm_format_info(DRM_FORMAT_R8);
+
+ if (!ssd130x->buffer_fi)
+ return -EINVAL;
+
+ buffer_pitch = drm_format_info_min_pitch(ssd130x->buffer_fi, 0,
ssd130x->width);
+ ssd130x->buffer_size = buffer_pitch * ssd130x->height;
+
+ return 0;
+}
+
+static void ssd132x_align_rect(struct ssd130x_device *ssd130x,
+ struct drm_rect *rect)
+{
+ /* Align x to display segment boundaries */
+ rect->x1 = round_down(rect->x1, SSD132X_SEGMENT_WIDTH);
+ rect->x2 = min_t(unsigned int, round_up(rect->x2,
SSD132X_SEGMENT_WIDTH),
+ ssd130x->width);
+}
+
+static int ssd132x_update_rect(struct ssd130x_device *ssd130x,
+ struct drm_rect *rect, u8 *buf,
+ u8 *data_array)
+{
+ unsigned int x = rect->x1;
+ unsigned int y = rect->y1;
+ unsigned int segment_width = SSD132X_SEGMENT_WIDTH;
+ unsigned int width = drm_rect_width(rect);
+ unsigned int height = drm_rect_height(rect);
+ unsigned int columns = DIV_ROUND_UP(width, segment_width);
+ unsigned int rows = height;
+ struct drm_device *drm = &ssd130x->drm;
+ u32 array_idx = 0;
+ int ret, i, j;
+
+ drm_WARN_ONCE(drm, x % segment_width != 0, "x must be aligned to screen
segment\n");
+
+ /*
+ * The screen is divided in Segment and Common outputs, where
+ * COM0 to COM[N - 1] are the rows and SEG0 to SEG[M - 1] are
+ * the columns.
+ *
+ * Each Segment has a 4-bit pixel and each Common output has a
+ * row of pixels. When using the (default) horizontal address
+ * increment mode, each byte of data sent to the controller has
+ * two Segments (e.g: SEG0 and SEG1) that are stored in the lower
+ * and higher nibbles of a single byte representing one column.
+ * That is, the first byte are SEG0 (D0[3:0]) and SEG1 (D0[7:4]),
+ * the second byte are SEG2 (D1[3:0]) and SEG3 (D1[7:4]) and so on.
+ */
+
+ /* Set column start and end */
+ ret = ssd130x_write_cmd(ssd130x, 3, SSD132X_SET_COL_RANGE, x /
segment_width, columns - 1);
+ if (ret < 0)
+ return ret;
+
+ /* Set row start and end */
+ ret = ssd130x_write_cmd(ssd130x, 3, SSD132X_SET_ROW_RANGE, y, rows - 1);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < height; i++) {
+ /* Process pair of pixels and combine them into a single byte */
+ for (j = 0; j < width; j += segment_width) {
+ u8 n1 = buf[i * width + j];
+ u8 n2 = buf[i * width + j + 1];
+
+ data_array[array_idx++] = (n2 << 4) | n1;
+ }
+ }
+
+ /* Write out update in one go since horizontal addressing mode is used
*/
+ ret = ssd130x_write_data(ssd130x, data_array, columns * rows);
+
+ return ret;
+}
+
+static void ssd132x_clear_screen(struct ssd130x_device *ssd130x, u8
*data_array)
+{
+ memset(data_array, 0, ssd130x->data_array_size);
+
+ /* Write out update in one go since horizontal addressing mode is used
*/
+ ssd130x_write_data(ssd130x, data_array, ssd130x->data_array_size);
+}
+
static const struct ssd130x_funcs ssd130x_family_funcs[] = {
[SSD130X_FAMILY] = {
.init = ssd130x_init,
@@ -652,6 +872,14 @@ static const struct ssd130x_funcs ssd130x_family_funcs[] =
{
.clear_screen = ssd130x_clear_screen,
.fmt_convert = drm_fb_xrgb8888_to_mono,
},
+ [SSD132X_FAMILY] = {
+ .init = ssd132x_init,
+ .set_buffer_sizes = ssd132x_set_buffer_sizes,
+ .align_rect = ssd132x_align_rect,
+ .update_rect = ssd132x_update_rect,
+ .clear_screen = ssd132x_clear_screen,
+ .fmt_convert = drm_fb_xrgb8888_to_gray8,
+ }
};
static int ssd130x_fb_blit_rect(struct drm_framebuffer *fb,
diff --git a/drivers/gpu/drm/solomon/ssd130x.h
b/drivers/gpu/drm/solomon/ssd130x.h
index b508ab98be2f..e93288b5a9c2 100644
--- a/drivers/gpu/drm/solomon/ssd130x.h
+++ b/drivers/gpu/drm/solomon/ssd130x.h
@@ -32,6 +32,10 @@ enum ssd130x_variants {
SSD1306_ID,
SSD1307_ID,
SSD1309_ID,
+ /* ssd132x family */
+ SSD1322_ID,
+ SSD1325_ID,
+ SSD1327_ID,
NR_SSD130X_VARIANTS
};
--
2.41.0
