The DRM DP code has macros for the DP power sequencing commands. Use
them in the anx7625 driver instead of raw numbers.
Fixes: 548b512e144f ("drm/bridge: anx7625: send DPCD command to downstream")
Fixes: 27f26359de9b ("drm/bridge: anx7625: Set downstream sink into normal
status")
Signed-off-by: Chen-Yu Tsai <we...@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfrapr...@collabora.com>
---
Collected tags and rebased on v6.5-rc1.
drivers/gpu/drm/bridge/analogix/anx7625.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c
b/drivers/gpu/drm/bridge/analogix/anx7625.c
index 8b985efdc086..9db3784cb554 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -931,8 +931,8 @@ static void anx7625_dp_start(struct anx7625_data *ctx)
dev_dbg(dev, "set downstream sink into normal\n");
/* Downstream sink enter into normal mode */
- data = 1;
- ret = anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, 0x000600, 1, &data);
+ data = DP_SET_POWER_D0;
+ ret = anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, DP_SET_POWER, 1,
&data);
if (ret < 0)
dev_err(dev, "IO error : set sink into normal mode fail\n");
@@ -971,8 +971,8 @@ static void anx7625_dp_stop(struct anx7625_data *ctx)
dev_dbg(dev, "notify downstream enter into standby\n");
/* Downstream monitor enter into standby mode */
- data = 2;
- ret |= anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, 0x000600, 1, &data);
+ data = DP_SET_POWER_D3;
+ ret |= anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, DP_SET_POWER, 1,
&data);
if (ret < 0)
DRM_DEV_ERROR(dev, "IO error : mute video fail\n");
--
2.41.0.255.g8b1d071c50-goog
