On 27/06/2023 23:14, Marijn Suijten wrote:
Enable and configure the dispcc node on SM6125 for consumption by MDSS
later on.
Signed-off-by: Marijn Suijten <marijn.suij...@somainline.org>
---
arch/arm64/boot/dts/qcom/sm6125.dtsi | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi
b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index edb03508dba3..a5cc0d43d2d9 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -3,6 +3,7 @@
* Copyright (c) 2021, Martin Botka <martin.bo...@somainline.org>
*/
+#include <dt-bindings/clock/qcom,dispcc-sm6125.h>
#include <dt-bindings/clock/qcom,gcc-sm6125.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/dma/qcom-gpi.h>
@@ -1203,6 +1204,30 @@ sram@4690000 {
reg = <0x04690000 0x10000>;
};
+ dispcc: clock-controller@5f00000 {
+ compatible = "qcom,sm6125-dispcc";
+ reg = <0x05f00000 0x20000>;
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+ clock-names = "bi_tcxo",
+ "dsi0_phy_pll_out_byteclk",
+ "dsi0_phy_pll_out_dsiclk",
+ "dsi1_phy_pll_out_dsiclk",
+ "dp_phy_pll_link_clk",
+ "dp_phy_pll_vco_div_clk",
+ "cfg_ahb_clk",
+ "gcc_disp_gpll0_div_clk_src";
+ power-domains = <&rpmpd SM6125_VDDCX>;
Would it be logical to specify the required-opps too?
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
apps_smmu: iommu@c600000 {
compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500",
"arm,mmu-500";
reg = <0x0c600000 0x80000>;
--
With best wishes
Dmitry
