On Fri, Jun 09, 2023 at 04:59:46PM +0200, Miquel Raynal wrote:
> The Sitronix controller expects 9-bit words, provide this as default at
> probe time rather than specifying this in each and every access.
>
> Signed-off-by: Miquel Raynal <miquel.ray...@bootlin.com>
> ---
> drivers/gpu/drm/panel/panel-sitronix-st7789v.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
> b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
> index c67b9adb157f..e9ca7ebb458a 100644
> --- a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
> +++ b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
> @@ -138,7 +138,6 @@ static int st7789v_spi_write(struct st7789v *ctx, enum
> st7789v_prefix prefix,
> spi_message_init(&msg);
>
> xfer.tx_buf = &txbuf;
> - xfer.bits_per_word = 9;
> xfer.len = sizeof(txbuf);
>
> spi_message_add_tail(&xfer, &msg);
> @@ -365,6 +364,13 @@ static int st7789v_probe(struct spi_device *spi)
> spi_set_drvdata(spi, ctx);
> ctx->spi = spi;
>
> + spi->bits_per_word = 9;
> + ret = spi_setup(spi);
> + if (ret < 0) {
> + dev_err(&spi->dev, "spi_setup failed: %d\n", ret);
> + return ret;
> + }
Use dev_err_probe().
With this change:
Reviewed-by: Sam Ravnborg <s...@ravnborg.org>
> +
> drm_panel_init(&ctx->panel, &spi->dev, &st7789v_drm_funcs,
> DRM_MODE_CONNECTOR_DPI);
>
> --
> 2.34.1
