Hi Chris, could you check if these two modifications by Frank of the init sequence
https://lore.kernel.org/dri-devel/20230211171748.36692-2-fr...@oltmanns.dev/ https://lore.kernel.org/dri-devel/20230213123238.76889-2-fr...@oltmanns.dev/ work for your panel too? Cheers, -- Guido On Wed, Apr 26, 2023 at 09:32:11AM -0500, Chris Morgan wrote: > From: Chris Morgan <macromor...@hotmail.com> > > The Anbernic RG353V-V2 panel is a 3.5 inch 640x480 MIPI-DSI LCD panel. > It's based on the ST7703 LCD controller just like rocktech,jh057n00900. > It's used in a 2nd revision of the Anbernic RG353V handheld gaming > device. Like the first revision of the RG353V the control chip is known > but the panel itself is unknown, so name it for the device. > > Signed-off-by: Chris Morgan <macromor...@hotmail.com> > Acked-by: Krzysztof Kozlowski <krzysztof.kozlow...@linaro.org> > Acked-by: Guido Günther <a...@sigxcpu.org> > --- > .../devicetree/bindings/display/panel/rocktech,jh057n00900.yaml | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git > a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml > b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml > index 09b5eb7542f8..150e81090af2 100644 > --- > a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml > +++ > b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml > @@ -20,6 +20,8 @@ allOf: > properties: > compatible: > enum: > + # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel > + - anbernic,rg353v-panel-v2 > # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel > - rocktech,jh057n00900 > # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel > -- > 2.34.1 > On Wed, Apr 26, 2023 at 09:32:12AM -0500, Chris Morgan wrote: > From: Chris Morgan <macromor...@hotmail.com> > > A later revision of the datasheet for the ST7703 refers to this command > as "SETECO". > > Signed-off-by: Chris Morgan <macromor...@hotmail.com> > Reviewed-by: Guido Günther <a...@sigxcpu.org> > --- > drivers/gpu/drm/panel/panel-sitronix-st7703.c | 5 ++--- > 1 file changed, 2 insertions(+), 3 deletions(-) > > diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c > b/drivers/gpu/drm/panel/panel-sitronix-st7703.c > index 6747ca237ced..fc55b5fbb67f 100644 > --- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c > +++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c > @@ -41,8 +41,8 @@ > #define ST7703_CMD_UNKNOWN_BF 0xBF > #define ST7703_CMD_SETSCR 0xC0 > #define ST7703_CMD_SETPOWER 0xC1 > +#define ST7703_CMD_SETECO 0xC6 > #define ST7703_CMD_SETPANEL 0xCC > -#define ST7703_CMD_UNKNOWN_C6 0xC6 > #define ST7703_CMD_SETGAMMA 0xE0 > #define ST7703_CMD_SETEQ 0xE3 > #define ST7703_CMD_SETGIP1 0xE9 > @@ -249,8 +249,7 @@ static int xbd599_init_sequence(struct st7703 *ctx) > * ESD_DET_TIME_SEL = 0 frames > */); > > - /* Undocumented command. */ > - mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_C6, 0x01, 0x00, 0xFF, > 0xFF, 0x00); > + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETECO, 0x01, 0x00, 0xFF, 0xFF, > 0x00); > > mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER, > 0x74, /* VBTHS, VBTLS: VGH = 17V, VBL = -11V */ > -- > 2.34.1 > On Wed, Apr 26, 2023 at 09:32:13AM -0500, Chris Morgan wrote: > From: Chris Morgan <macromor...@hotmail.com> > > The Anbernic RG353V-V2 is a 5 inch panel used in a new revision of the > Anbernic RG353V handheld gaming device. Add support for it. > > Unfortunately it appears this controller is not able to support 120hz > or 100hz mode like the first revision panel. > > Signed-off-by: Chris Morgan <macromor...@hotmail.com> > Reviewed-by: Guido Günther <a...@sigxcpu.org> > --- > drivers/gpu/drm/panel/panel-sitronix-st7703.c | 97 +++++++++++++++++++ > 1 file changed, 97 insertions(+) > > diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c > b/drivers/gpu/drm/panel/panel-sitronix-st7703.c > index fc55b5fbb67f..3aa31f3d6157 100644 > --- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c > +++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c > @@ -28,6 +28,7 @@ > /* Manufacturer specific Commands send via DSI */ > #define ST7703_CMD_ALL_PIXEL_OFF 0x22 > #define ST7703_CMD_ALL_PIXEL_ON 0x23 > +#define ST7703_CMD_SETAPID 0xB1 > #define ST7703_CMD_SETDISP 0xB2 > #define ST7703_CMD_SETRGBIF 0xB3 > #define ST7703_CMD_SETCYC 0xB4 > @@ -42,11 +43,14 @@ > #define ST7703_CMD_SETSCR 0xC0 > #define ST7703_CMD_SETPOWER 0xC1 > #define ST7703_CMD_SETECO 0xC6 > +#define ST7703_CMD_SETIO 0xC7 > +#define ST7703_CMD_SETCABC 0xC8 > #define ST7703_CMD_SETPANEL 0xCC > #define ST7703_CMD_SETGAMMA 0xE0 > #define ST7703_CMD_SETEQ 0xE3 > #define ST7703_CMD_SETGIP1 0xE9 > #define ST7703_CMD_SETGIP2 0xEA > +#define ST7703_CMD_UNKNOWN_EF 0xEF > > struct st7703 { > struct device *dev; > @@ -337,6 +341,98 @@ static const struct st7703_panel_desc xbd599_desc = { > .init_sequence = xbd599_init_sequence, > }; > > +static int rg353v2_init_sequence(struct st7703 *ctx) > +{ > + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); > + > + /* > + * Init sequence was supplied by the panel vendor. > + */ > + > + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xf1, 0x12, 0x83); > + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETAPID, 0x00, 0x00, 0x00, > + 0xda, 0x80); > + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP, 0x00, 0x13, 0x70); > + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF, 0x10, 0x10, 0x28, > + 0x28, 0x03, 0xff, 0x00, 0x00, 0x00, 0x00); > + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80); > + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP, 0x0a, 0x0a); > + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM, 0x92, 0x92); > + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT, 0x25, 0x22, > + 0xf0, 0x63); > + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI, 0x33, 0x81, 0x05, > + 0xf9, 0x0e, 0x0e, 0x20, 0x00, 0x00, 0x00, 0x00, > + 0x00, 0x00, 0x00, 0x44, 0x25, 0x00, 0x90, 0x0a, > + 0x00, 0x00, 0x01, 0x4f, 0x01, 0x00, 0x00, 0x37); > + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x47); > + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00); > + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR, 0x73, 0x73, 0x50, 0x50, > + 0x00, 0x00, 0x12, 0x50, 0x00); > + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER, 0x53, 0xc0, 0x32, > + 0x32, 0x77, 0xe1, 0xdd, 0xdd, 0x77, 0x77, 0x33, > + 0x33); > + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETECO, 0x82, 0x00, 0xbf, 0xff, > + 0x00, 0xff); > + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETIO, 0xb8, 0x00, 0x0a, 0x00, > + 0x00, 0x00); > + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCABC, 0x10, 0x40, 0x1e, > + 0x02); > + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0b); > + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA, 0x00, 0x07, 0x0d, > + 0x37, 0x35, 0x3f, 0x41, 0x44, 0x06, 0x0c, 0x0d, > + 0x0f, 0x11, 0x10, 0x12, 0x14, 0x1a, 0x00, 0x07, > + 0x0d, 0x37, 0x35, 0x3f, 0x41, 0x44, 0x06, 0x0c, > + 0x0d, 0x0f, 0x11, 0x10, 0x12, 0x14, 0x1a); > + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ, 0x07, 0x07, 0x0b, 0x0b, > + 0x0b, 0x0b, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, > + 0xc0, 0x10); > + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1, 0xc8, 0x10, 0x02, 0x00, > + 0x00, 0xb0, 0xb1, 0x11, 0x31, 0x23, 0x28, 0x80, > + 0xb0, 0xb1, 0x27, 0x08, 0x00, 0x04, 0x02, 0x00, > + 0x00, 0x00, 0x00, 0x04, 0x02, 0x00, 0x00, 0x00, > + 0x88, 0x88, 0xba, 0x60, 0x24, 0x08, 0x88, 0x88, > + 0x88, 0x88, 0x88, 0x88, 0x88, 0xba, 0x71, 0x35, > + 0x18, 0x88, 0x88, 0x88, 0x88, 0x88, 0x00, 0x00, > + 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, > + 0x00, 0x00, 0x00); > + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2, 0x97, 0x0a, 0x82, 0x02, > + 0x03, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, > + 0x81, 0x88, 0xba, 0x17, 0x53, 0x88, 0x88, 0x88, > + 0x88, 0x88, 0x88, 0x80, 0x88, 0xba, 0x06, 0x42, > + 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x23, 0x00, > + 0x00, 0x02, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, > + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, > + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, > + 0x00); > + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_EF, 0xff, 0xff, 0x01); > + > + return 0; > +} > + > +static const struct drm_display_mode rg353v2_mode = { > + .hdisplay = 640, > + .hsync_start = 640 + 40, > + .hsync_end = 640 + 40 + 2, > + .htotal = 640 + 40 + 2 + 80, > + .vdisplay = 480, > + .vsync_start = 480 + 18, > + .vsync_end = 480 + 18 + 2, > + .vtotal = 480 + 18 + 2 + 28, > + .clock = 24150, > + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, > + .width_mm = 70, > + .height_mm = 57, > +}; > + > +static const struct st7703_panel_desc rg353v2_desc = { > + .mode = &rg353v2_mode, > + .lanes = 4, > + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | > + MIPI_DSI_MODE_NO_EOT_PACKET | MIPI_DSI_MODE_LPM, > + .format = MIPI_DSI_FMT_RGB888, > + .init_sequence = rg353v2_init_sequence, > +}; > + > static int st7703_enable(struct drm_panel *panel) > { > struct st7703 *ctx = panel_to_st7703(panel); > @@ -597,6 +693,7 @@ static void st7703_remove(struct mipi_dsi_device *dsi) > } > > static const struct of_device_id st7703_of_match[] = { > + { .compatible = "anbernic,rg353v-panel-v2", .data = &rg353v2_desc }, > { .compatible = "rocktech,jh057n00900", .data = &jh057n00900_panel_desc > }, > { .compatible = "xingbangda,xbd599", .data = &xbd599_desc }, > { /* sentinel */ } > -- > 2.34.1 >
