Bumping patch submission. On Mon, Feb 20, 2023 at 5:10 PM Jonathan Cormier <jcorm...@criticallink.com> wrote:
> The TFP410 driver does not support I2C. As such, the device remains in > Power Down if the I2C is enabled by the bootstrap pins. > > Add basic support for the I2C interface, and provide support to take > the device out of power down when enabled. Also read the bootstrap mode > pins via the CTL_1_MODE register when using the I2C bus. > > Also allow polling device to support hdmi/dvi hotplug detection. > > Signed-off-by: Jonathan Cormier <jcorm...@criticallink.com> > --- > Changes in v3: > - Drop dt-bindings i2c example > - Link to v2: > https://lore.kernel.org/r/20230125-tfp410_i2c-v2-0-bf22f4dcb...@criticallink.com > > Changes in v2: > - Fix dt_binding_check errors > - Remove hdmi connector from binding example > - Fix compile warning. Unused variable and unsigned int instead of int for > ret > - Fix commit titles > - Drop of_match_ptr change > - Link to v1: > https://lore.kernel.org/r/20230125-tfp410_i2c-v1-0-66a4d4e39...@criticallink.com > > --- > Michael Williamson (3): > drm/bridge: tfp410: Support basic I2C interface > drm/bridge: tfp410: Fix logic to configured polled HPD > drm/bridge: tfp410: If connected, use I2C for polled HPD status. > > drivers/gpu/drm/bridge/ti-tfp410.c | 107 > +++++++++++++++++++++++++++---------- > 1 file changed, 80 insertions(+), 27 deletions(-) > --- > base-commit: 93f875a8526a291005e7f38478079526c843cbec > change-id: 20230125-tfp410_i2c-3b270b0bf3e0 > > Best regards, > -- > Jonathan Cormier <jcorm...@criticallink.com> > > -- Jonathan Cormier Software Engineer Voice: 315.425.4045 x222 http://www.CriticalLink.com <http://www.criticallink.com/> 6712 Brooklawn Parkway, Syracuse, NY 13211 <https://www.linkedin.com/company/critical-link-llc> <https://twitter.com/Critical_Link>