On 12/30/2022 7:35 AM, Robert Foss wrote:
Enable the display subsystem and the dsi0 output for the sm8350-hdk board. Signed-off-by: Robert Foss <robert.f...@linaro.org>
Reviewed-by: Jessica Zhang <quic_jessz...@quicinc.com> Tested-by: Jessica Zhang <quic_jessz...@quicinc.com> #SM8350 (HDK)
--- arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index e6deb08c6da0..1961f941ff83 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -213,10 +213,32 @@ &cdsp { firmware-name = "qcom/sm8350/cdsp.mbn"; };+&dispcc {+ status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l6b_1p2>; + status = "okay"; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l5b_0p88>; + status = "okay"; +}; + &gpi_dma1 { status = "okay"; };+&mdss {+ status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + &mpss { status = "okay"; firmware-name = "qcom/sm8350/modem.mbn"; -- 2.34.1
