From: Nicolas Boichat <drink...@chromium.org>

This driver supports single input, 2 output display mux (e.g.
HDMI mux), that provide its status via a GPIO.

Signed-off-by: Nicolas Boichat <drink...@chromium.org>
Signed-off-by: Pin-yen Lin <treapk...@chromium.org>

---

Changes in v3:
- Added .get_edid callback in generic-gpio-mux driver

Changes in v2:
- Dropped attach/mode_set/enable/disable callbacks
- Fixed style issues
- Removed the special case for the HDMI connector
- Made the driver only read the GPIO status in IRQ handler
- Rebased to drm-misc-next
- Update the license: "GPL v2" --> "GPL"

 drivers/gpu/drm/bridge/Kconfig            |  10 +
 drivers/gpu/drm/bridge/Makefile           |   1 +
 drivers/gpu/drm/bridge/generic-gpio-mux.c | 222 ++++++++++++++++++++++
 3 files changed, 233 insertions(+)
 create mode 100644 drivers/gpu/drm/bridge/generic-gpio-mux.c

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 12e8f30c65f7..42d7c418e8ff 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -73,6 +73,16 @@ config DRM_FSL_LDB
        help
          Support for i.MX8MP DPI-to-LVDS on-SoC encoder.
 
+config DRM_GENERIC_GPIO_MUX
+       tristate "Generic GPIO-controlled mux"
+       depends on OF
+       select DRM_KMS_HELPER
+       help
+         This bridge driver models a GPIO-controlled display mux with one
+         input, 2 outputs (e.g. an HDMI mux). The hardware decides which output
+         is active, reports it as a GPIO, and the driver redirects calls to the
+         appropriate downstream bridge (if any).
+
 config DRM_ITE_IT6505
         tristate "ITE IT6505 DisplayPort bridge"
         depends on OF
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 52f6e8b4a821..4d6d7f63330c 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o
 obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o
 obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o
 obj-$(CONFIG_DRM_FSL_LDB) += fsl-ldb.o
+obj-$(CONFIG_DRM_GENERIC_GPIO_MUX) += generic-gpio-mux.o
 obj-$(CONFIG_DRM_ITE_IT6505) += ite-it6505.o
 obj-$(CONFIG_DRM_LONTIUM_LT8912B) += lontium-lt8912b.o
 obj-$(CONFIG_DRM_LONTIUM_LT9211) += lontium-lt9211.o
diff --git a/drivers/gpu/drm/bridge/generic-gpio-mux.c 
b/drivers/gpu/drm/bridge/generic-gpio-mux.c
new file mode 100644
index 000000000000..928edde701fa
--- /dev/null
+++ b/drivers/gpu/drm/bridge/generic-gpio-mux.c
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Generic gpio mux bridge driver
+ *
+ * Copyright 2016 Google LLC
+ */
+
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+
+#include <drm/drm_bridge.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_probe_helper.h>
+
+struct gpio_display_mux {
+       struct device *dev;
+
+       struct gpio_desc *gpiod_detect;
+       int detect_irq;
+       int cur_next;
+
+       struct drm_bridge bridge;
+
+       struct drm_bridge *next[2];
+};
+
+static inline struct gpio_display_mux *bridge_to_gpio_display_mux(
+               struct drm_bridge *bridge)
+{
+       return container_of(bridge, struct gpio_display_mux, bridge);
+}
+
+static irqreturn_t gpio_display_mux_det_threaded_handler(int unused, void 
*data)
+{
+       struct gpio_display_mux *mux = data;
+       int active = gpiod_get_value(mux->gpiod_detect);
+
+       if (active < 0) {
+               dev_err(mux->dev, "Failed to get detect GPIO\n");
+               return IRQ_HANDLED;
+       }
+
+       dev_dbg(mux->dev, "Interrupt %d!\n", active);
+       mux->cur_next = active;
+
+       if (mux->bridge.dev)
+               drm_kms_helper_hotplug_event(mux->bridge.dev);
+
+       return IRQ_HANDLED;
+}
+
+static bool gpio_display_mux_mode_fixup(struct drm_bridge *bridge,
+                               const struct drm_display_mode *mode,
+                               struct drm_display_mode *adjusted_mode)
+{
+       struct gpio_display_mux *mux = bridge_to_gpio_display_mux(bridge);
+       struct drm_bridge *next;
+
+       next = mux->next[mux->cur_next];
+
+       /* Assume that we have a most one bridge in both downstreams */
+       if (next && next->funcs->mode_fixup)
+               return next->funcs->mode_fixup(next, mode, adjusted_mode);
+
+       return true;
+}
+
+static struct edid *gpio_display_mux_get_edid(struct drm_bridge *bridge,
+                                             struct drm_connector *connector)
+{
+       struct gpio_display_mux *mux = bridge_to_gpio_display_mux(bridge);
+       struct drm_bridge *next;
+
+       next = mux->next[mux->cur_next];
+
+       return next->funcs->get_edid(next, connector);
+}
+
+static const struct drm_bridge_funcs gpio_display_mux_bridge_funcs = {
+       .mode_fixup = gpio_display_mux_mode_fixup,
+       .get_edid = gpio_display_mux_get_edid,
+};
+
+static int gpio_display_mux_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       struct gpio_display_mux *mux;
+       struct device_node *port, *ep, *remote;
+       int ret;
+       u32 reg;
+
+       mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
+       if (!mux)
+               return -ENOMEM;
+
+       platform_set_drvdata(pdev, mux);
+       mux->dev = &pdev->dev;
+
+       mux->bridge.of_node = dev->of_node;
+
+       mux->gpiod_detect = devm_gpiod_get(dev, "detect", GPIOD_IN);
+       if (IS_ERR(mux->gpiod_detect))
+               return PTR_ERR(mux->gpiod_detect);
+
+       mux->detect_irq = gpiod_to_irq(mux->gpiod_detect);
+       if (mux->detect_irq < 0) {
+               dev_err(dev, "Failed to get output irq %d\n",
+                       mux->detect_irq);
+               return -ENODEV;
+       }
+
+       port = of_graph_get_port_by_id(dev->of_node, 1);
+       if (!port) {
+               dev_err(dev, "Missing output port node\n");
+               return -EINVAL;
+       }
+
+       for_each_child_of_node(port, ep) {
+               if (!ep->name || (of_node_cmp(ep->name, "endpoint") != 0)) {
+                       of_node_put(ep);
+                       continue;
+               }
+
+               if (of_property_read_u32(ep, "reg", &reg) < 0 ||
+                   reg >= ARRAY_SIZE(mux->next)) {
+                       dev_err(dev,
+                               "Missing/invalid reg property for endpoint 
%s\n",
+                               ep->full_name);
+                       of_node_put(ep);
+                       of_node_put(port);
+                       return -EINVAL;
+               }
+
+               remote = of_graph_get_remote_port_parent(ep);
+               if (!remote) {
+                       dev_err(dev,
+                               "Missing connector/bridge node for endpoint 
%s\n",
+                               ep->full_name);
+                       of_node_put(ep);
+                       of_node_put(port);
+                       return -EINVAL;
+               }
+
+               mux->next[reg] = of_drm_find_bridge(remote);
+               if (!mux->next[reg]) {
+                       dev_err(dev, "Waiting for external bridge %s\n",
+                               remote->name);
+                       of_node_put(ep);
+                       of_node_put(remote);
+                       of_node_put(port);
+                       return -EPROBE_DEFER;
+               }
+
+               of_node_put(remote);
+       }
+       of_node_put(port);
+
+       /*
+        * Because the next bridges are not registered to the drm bridge chain,
+        * we have to set DRM_BRIDGE_OP_EDID here and trigger the .get_edid
+        * callbacks of the actual connectors.
+        */
+       if (mux->next[0] && mux->next[0]->ops & DRM_BRIDGE_OP_EDID &&
+           mux->next[1] && mux->next[1]->ops & DRM_BRIDGE_OP_EDID)
+               mux->bridge.ops |= DRM_BRIDGE_OP_EDID;
+
+       mux->bridge.funcs = &gpio_display_mux_bridge_funcs;
+       mux->bridge.type = DRM_MODE_CONNECTOR_DisplayPort;
+       drm_bridge_add(&mux->bridge);
+
+       ret = devm_request_threaded_irq(dev, mux->detect_irq, NULL,
+                                       gpio_display_mux_det_threaded_handler,
+                                       IRQF_TRIGGER_RISING |
+                                       IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+                                       "gpio-display-mux-det", mux);
+       if (ret) {
+               dev_err(dev, "Failed to request MUX_DET threaded irq\n");
+               goto err_bridge_remove;
+       }
+
+       return 0;
+
+err_bridge_remove:
+       drm_bridge_remove(&mux->bridge);
+
+       return ret;
+}
+
+static int gpio_display_mux_remove(struct platform_device *pdev)
+{
+       struct gpio_display_mux *mux = platform_get_drvdata(pdev);
+
+       disable_irq(mux->detect_irq);
+       drm_bridge_remove(&mux->bridge);
+
+       return 0;
+}
+
+static const struct of_device_id gpio_display_mux_match[] = {
+       { .compatible = "gpio-display-mux", },
+       {},
+};
+
+struct platform_driver gpio_display_mux_driver = {
+       .probe = gpio_display_mux_probe,
+       .remove = gpio_display_mux_remove,
+       .driver = {
+               .name = "gpio-display-mux",
+               .of_match_table = gpio_display_mux_match,
+       },
+};
+
+module_platform_driver(gpio_display_mux_driver);
+
+MODULE_DESCRIPTION("GPIO-controlled display mux");
+MODULE_AUTHOR("Nicolas Boichat <drink...@chromium.org>");
+MODULE_LICENSE("GPL");
-- 
2.39.2.637.g21b0678d19-goog

Reply via email to