On 9.02.2023 14:38, Dmitry Baryshkov wrote:
> Continue ordering DT nodes by their address. Move RNG, UFS, system NoC
> and SLPI nodes to the proper position.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.barysh...@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dyb...@linaro.org>
Konrad
> arch/arm64/boot/dts/qcom/sm8350.dtsi | 314 +++++++++++++--------------
> 1 file changed, 157 insertions(+), 157 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> index b85bd8fd28c0..8bf38d350521 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> @@ -1421,6 +1421,13 @@ spi13: spi@a94000 {
> };
> };
>
> + rng: rng@10d3000 {
> + compatible = "qcom,prng-ee";
> + reg = <0 0x010d3000 0 0x1000>;
> + clocks = <&rpmhcc RPMH_HWKM_CLK>;
> + clock-names = "core";
> + };
> +
> config_noc: interconnect@1500000 {
> compatible = "qcom,sm8350-config-noc";
> reg = <0 0x01500000 0 0xa580>;
> @@ -1641,18 +1648,76 @@ pcie1_phy: phy@1c0f000 {
> status = "disabled";
> };
>
> - lpass_ag_noc: interconnect@3c40000 {
> - compatible = "qcom,sm8350-lpass-ag-noc";
> - reg = <0 0x03c40000 0 0xf080>;
> - #interconnect-cells = <2>;
> - qcom,bcm-voters = <&apps_bcm_voter>;
> + ufs_mem_hc: ufshc@1d84000 {
> + compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
> + "jedec,ufs-2.0";
> + reg = <0 0x01d84000 0 0x3000>;
> + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> + phys = <&ufs_mem_phy_lanes>;
> + phy-names = "ufsphy";
> + lanes-per-direction = <2>;
> + #reset-cells = <1>;
> + resets = <&gcc GCC_UFS_PHY_BCR>;
> + reset-names = "rst";
> +
> + power-domains = <&gcc UFS_PHY_GDSC>;
> +
> + iommus = <&apps_smmu 0xe0 0x0>;
> +
> + clock-names =
> + "core_clk",
> + "bus_aggr_clk",
> + "iface_clk",
> + "core_clk_unipro",
> + "ref_clk",
> + "tx_lane0_sync_clk",
> + "rx_lane0_sync_clk",
> + "rx_lane1_sync_clk";
> + clocks =
> + <&gcc GCC_UFS_PHY_AXI_CLK>,
> + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> + <&gcc GCC_UFS_PHY_AHB_CLK>,
> + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
> + freq-table-hz =
> + <75000000 300000000>,
> + <0 0>,
> + <0 0>,
> + <75000000 300000000>,
> + <0 0>,
> + <0 0>,
> + <0 0>,
> + <0 0>;
> + status = "disabled";
> };
>
> - compute_noc: interconnect@a0c0000 {
> - compatible = "qcom,sm8350-compute-noc";
> - reg = <0 0x0a0c0000 0 0xa180>;
> - #interconnect-cells = <2>;
> - qcom,bcm-voters = <&apps_bcm_voter>;
> + ufs_mem_phy: phy@1d87000 {
> + compatible = "qcom,sm8350-qmp-ufs-phy";
> + reg = <0 0x01d87000 0 0x1c4>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + clock-names = "ref",
> + "ref_aux";
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
> +
> + resets = <&ufs_mem_hc 0>;
> + reset-names = "ufsphy";
> + status = "disabled";
> +
> + ufs_mem_phy_lanes: phy@1d87400 {
> + reg = <0 0x01d87400 0 0x188>,
> + <0 0x01d87600 0 0x200>,
> + <0 0x01d87c00 0 0x200>,
> + <0 0x01d87800 0 0x188>,
> + <0 0x01d87a00 0 0x200>;
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> + };
> };
>
> ipa: ipa@1e40000 {
> @@ -1700,6 +1765,13 @@ tcsr_mutex: hwlock@1f40000 {
> #hwlock-cells = <1>;
> };
>
> + lpass_ag_noc: interconnect@3c40000 {
> + compatible = "qcom,sm8350-lpass-ag-noc";
> + reg = <0 0x03c40000 0 0xf080>;
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> mpss: remoteproc@4080000 {
> compatible = "qcom,sm8350-mpss-pas";
> reg = <0x0 0x04080000 0x0 0x4040>;
> @@ -1742,6 +1814,74 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
> };
> };
>
> + slpi: remoteproc@5c00000 {
> + compatible = "qcom,sm8350-slpi-pas";
> + reg = <0 0x05c00000 0 0x4000>;
> +
> + interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
> + <&smp2p_slpi_in 0
> IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_slpi_in 1
> IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_slpi_in 2
> IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_slpi_in 3
> IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "xo";
> +
> + power-domains = <&rpmhpd SM8350_LCX>,
> + <&rpmhpd SM8350_LMX>;
> + power-domain-names = "lcx", "lmx";
> +
> + memory-region = <&pil_slpi_mem>;
> +
> + qcom,qmp = <&aoss_qmp>;
> +
> + qcom,smem-states = <&smp2p_slpi_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
> +
> IPCC_MPROC_SIGNAL_GLINK_QMP
> +
> IRQ_TYPE_EDGE_RISING>;
> + mboxes = <&ipcc IPCC_CLIENT_SLPI
> + IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> + label = "slpi";
> + qcom,remote-pid = <3>;
> +
> + fastrpc {
> + compatible = "qcom,fastrpc";
> + qcom,glink-channels =
> "fastrpcglink-apps-dsp";
> + label = "sdsp";
> + qcom,non-secure-domain;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + compute-cb@1 {
> + compatible =
> "qcom,fastrpc-compute-cb";
> + reg = <1>;
> + iommus = <&apps_smmu 0x0541
> 0x0>;
> + };
> +
> + compute-cb@2 {
> + compatible =
> "qcom,fastrpc-compute-cb";
> + reg = <2>;
> + iommus = <&apps_smmu 0x0542
> 0x0>;
> + };
> +
> + compute-cb@3 {
> + compatible =
> "qcom,fastrpc-compute-cb";
> + reg = <3>;
> + iommus = <&apps_smmu 0x0543
> 0x0>;
> + /* note: shared-cb = <4> in
> downstream */
> + };
> + };
> + };
> + };
> +
> pdc: interrupt-controller@b220000 {
> compatible = "qcom,sm8350-pdc", "qcom,pdc";
> reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
> @@ -2012,153 +2152,6 @@ qup_i2c19_default: qup-i2c19-default-state {
> };
> };
>
> - rng: rng@10d3000 {
> - compatible = "qcom,prng-ee";
> - reg = <0 0x010d3000 0 0x1000>;
> - clocks = <&rpmhcc RPMH_HWKM_CLK>;
> - clock-names = "core";
> - };
> -
> - ufs_mem_hc: ufshc@1d84000 {
> - compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
> - "jedec,ufs-2.0";
> - reg = <0 0x01d84000 0 0x3000>;
> - interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> - phys = <&ufs_mem_phy_lanes>;
> - phy-names = "ufsphy";
> - lanes-per-direction = <2>;
> - #reset-cells = <1>;
> - resets = <&gcc GCC_UFS_PHY_BCR>;
> - reset-names = "rst";
> -
> - power-domains = <&gcc UFS_PHY_GDSC>;
> -
> - iommus = <&apps_smmu 0xe0 0x0>;
> -
> - clock-names =
> - "core_clk",
> - "bus_aggr_clk",
> - "iface_clk",
> - "core_clk_unipro",
> - "ref_clk",
> - "tx_lane0_sync_clk",
> - "rx_lane0_sync_clk",
> - "rx_lane1_sync_clk";
> - clocks =
> - <&gcc GCC_UFS_PHY_AXI_CLK>,
> - <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> - <&gcc GCC_UFS_PHY_AHB_CLK>,
> - <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> - <&rpmhcc RPMH_CXO_CLK>,
> - <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> - <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
> - freq-table-hz =
> - <75000000 300000000>,
> - <0 0>,
> - <0 0>,
> - <75000000 300000000>,
> - <0 0>,
> - <0 0>,
> - <0 0>,
> - <0 0>;
> - status = "disabled";
> - };
> -
> - ufs_mem_phy: phy@1d87000 {
> - compatible = "qcom,sm8350-qmp-ufs-phy";
> - reg = <0 0x01d87000 0 0x1c4>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> - clock-names = "ref",
> - "ref_aux";
> - clocks = <&rpmhcc RPMH_CXO_CLK>,
> - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
> -
> - resets = <&ufs_mem_hc 0>;
> - reset-names = "ufsphy";
> - status = "disabled";
> -
> - ufs_mem_phy_lanes: phy@1d87400 {
> - reg = <0 0x01d87400 0 0x188>,
> - <0 0x01d87600 0 0x200>,
> - <0 0x01d87c00 0 0x200>,
> - <0 0x01d87800 0 0x188>,
> - <0 0x01d87a00 0 0x200>;
> - #clock-cells = <1>;
> - #phy-cells = <0>;
> - };
> - };
> -
> - slpi: remoteproc@5c00000 {
> - compatible = "qcom,sm8350-slpi-pas";
> - reg = <0 0x05c00000 0 0x4000>;
> -
> - interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
> - <&smp2p_slpi_in 0
> IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_slpi_in 1
> IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_slpi_in 2
> IRQ_TYPE_EDGE_RISING>,
> - <&smp2p_slpi_in 3
> IRQ_TYPE_EDGE_RISING>;
> - interrupt-names = "wdog", "fatal", "ready",
> - "handover", "stop-ack";
> -
> - clocks = <&rpmhcc RPMH_CXO_CLK>;
> - clock-names = "xo";
> -
> - power-domains = <&rpmhpd SM8350_LCX>,
> - <&rpmhpd SM8350_LMX>;
> - power-domain-names = "lcx", "lmx";
> -
> - memory-region = <&pil_slpi_mem>;
> -
> - qcom,qmp = <&aoss_qmp>;
> -
> - qcom,smem-states = <&smp2p_slpi_out 0>;
> - qcom,smem-state-names = "stop";
> -
> - status = "disabled";
> -
> - glink-edge {
> - interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
> -
> IPCC_MPROC_SIGNAL_GLINK_QMP
> -
> IRQ_TYPE_EDGE_RISING>;
> - mboxes = <&ipcc IPCC_CLIENT_SLPI
> - IPCC_MPROC_SIGNAL_GLINK_QMP>;
> -
> - label = "slpi";
> - qcom,remote-pid = <3>;
> -
> - fastrpc {
> - compatible = "qcom,fastrpc";
> - qcom,glink-channels =
> "fastrpcglink-apps-dsp";
> - label = "sdsp";
> - qcom,non-secure-domain;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - compute-cb@1 {
> - compatible =
> "qcom,fastrpc-compute-cb";
> - reg = <1>;
> - iommus = <&apps_smmu 0x0541
> 0x0>;
> - };
> -
> - compute-cb@2 {
> - compatible =
> "qcom,fastrpc-compute-cb";
> - reg = <2>;
> - iommus = <&apps_smmu 0x0542
> 0x0>;
> - };
> -
> - compute-cb@3 {
> - compatible =
> "qcom,fastrpc-compute-cb";
> - reg = <3>;
> - iommus = <&apps_smmu 0x0543
> 0x0>;
> - /* note: shared-cb = <4> in
> downstream */
> - };
> - };
> - };
> - };
> -
> sdhc_2: mmc@8804000 {
> compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
> reg = <0 0x08804000 0 0x1000>;
> @@ -2307,6 +2300,13 @@ system-cache-controller@9200000 {
> reg-names = "llcc_base", "llcc_broadcast_base";
> };
>
> + compute_noc: interconnect@a0c0000 {
> + compatible = "qcom,sm8350-compute-noc";
> + reg = <0 0x0a0c0000 0 0xa180>;
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> usb_1: usb@a6f8800 {
> compatible = "qcom,sm8350-dwc3", "qcom,dwc3";
> reg = <0 0x0a6f8800 0 0x400>;
