add support for*
drm/msm/dpu*
On 2023-01-23 10:24:30, Kuogee Hsieh wrote:
DSC V1.2 encoder engine is newly added hardware module. This patch
add support functions to configure and enable DSC V1.2 encoder engine.
Signed-off-by: Kuogee Hsieh <quic_khs...@quicinc.com>
---
drivers/gpu/drm/msm/Makefile | 1 +
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 2 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 60 +++-
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c | 23 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h | 23 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c | 371 +++++++++++++++++++++++++
6 files changed, 463 insertions(+), 17 deletions(-)
create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index 28cf52b..271c29a15 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -65,6 +65,7 @@ msm-$(CONFIG_DRM_MSM_DPU) += \
disp/dpu1/dpu_hw_catalog.o \
disp/dpu1/dpu_hw_ctl.o \
disp/dpu1/dpu_hw_dsc.o \
+ disp/dpu1/dpu_hw_dsc_1_2.o \
disp/dpu1/dpu_dsc_helper.o \
disp/dpu1/dpu_hw_interrupts.o \
disp/dpu1/dpu_hw_intf.o \
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 7f4a439..901e317 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -1821,7 +1821,7 @@ static void dpu_encoder_dsc_pipe_cfg(struct dpu_hw_dsc
*hw_dsc,
u32 initial_lines)
{
if (hw_dsc->ops.dsc_config)
- hw_dsc->ops.dsc_config(hw_dsc, dsc, common_mode, initial_lines);
+ hw_dsc->ops.dsc_config(hw_dsc, dsc, common_mode, initial_lines,
false);
As usual, an enum is better: readers have no idea what a free-floating
bool means.
if (hw_dsc->ops.dsc_config_thresh)
hw_dsc->ops.dsc_config_thresh(hw_dsc, dsc);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 978e3bd..7b0b092 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
- * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2022-2023, Qualcomm Innovation Center, Inc. All rights
reserved.
* Copyright (c) 2015-2018, 2020 The Linux Foundation. All rights reserved.
*/
@@ -11,6 +11,7 @@
#include <linux/bug.h>
#include <linux/bitmap.h>
#include <linux/err.h>
+#include "dpu_hw_mdss.h"
Unused if you remove the unused DECLARE_BITMAP(dsc_pair_mask, DSC_MAX).
/**
* Max hardware block count: For ex: max 12 SSPP pipes or
@@ -182,6 +183,7 @@ enum {
* @DPU_PINGPONG_TE2 Additional tear check block for split pipes
* @DPU_PINGPONG_SPLIT PP block supports split fifo
* @DPU_PINGPONG_SLAVE PP block is a suitable slave for split fifo
+ * @DPU_PINGPONG_DSC, Display stream compression blocks
* @DPU_PINGPONG_DITHER, Dither blocks
* @DPU_PINGPONG_MAX
*/
@@ -190,10 +192,32 @@ enum {
DPU_PINGPONG_TE2,
DPU_PINGPONG_SPLIT,
DPU_PINGPONG_SLAVE,
+ DPU_PINGPONG_DSC,
This is not used.
DPU_PINGPONG_DITHER,
DPU_PINGPONG_MAX
};
+
+/** DSC sub-blocks/features
Newline between /** and the text.
+ * @DPU_DSC_OUTPUT_CTRL Supports the control of the pp id which gets
+ * the pixel output from this DSC.
The original comment is much more concise, can we keep it?
+ * @DPU_DSC_HW_REV_1_1 dsc block supports dsc 1.1 only
+ * @DPU_DSC_HW_REV_1_2 dsc block supports dsc 1.1 and 1.2
Capitalize DSC just like elsewhere.
+ * @DPU_DSC_NATIVE_422_EN, Supports native422 and native420 encoding
+ * @DPU_DSC_ENC, DSC encoder sub block
+ * @DPU_DSC_CTL, DSC ctl sub block
No need for trailing commas in doc comments; if anything replace them
with colons?
+ * @DPU_DSC_MAX
+ */
+enum {
+ DPU_DSC_OUTPUT_CTRL = 0x1,
+ DPU_DSC_HW_REV_1_1,
+ DPU_DSC_HW_REV_1_2,
+ DPU_DSC_NATIVE_422_EN,
+ DPU_DSC_ENC,
+ DPU_DSC_CTL,
These two enum values only have a meaning within the dpu_hw_dsc_1_2.c
file, and have nothing to do with the other feature flags/block
description. Please move them there (and give _dsc_subblk_offset a
proper enum type).
+ DPU_DSC_MAX
+};
+
/**
* CTL sub-blocks
* @DPU_CTL_SPLIT_DISPLAY: CTL supports video mode split display
@@ -276,15 +300,6 @@ enum {
};
/**
- * DSC features
- * @DPU_DSC_OUTPUT_CTRL Configure which PINGPONG block gets
- * the pixel output from this DSC.
- */
-enum {
- DPU_DSC_OUTPUT_CTRL = 0x1,
Did this have to move?
-};
-
-/**
* MACRO DPU_HW_BLK_INFO - information of HW blocks inside DPU
* @name: string name for debug purposes
* @id: enum identifying this block
@@ -346,6 +361,14 @@ struct dpu_pp_blk {
};
/**
+ * struct dpu_dsc_blk : DSC Encoder sub-blk information
Use a hyphen here and everywhere else:
https://docs.kernel.org/doc-guide/kernel-doc.html
+ * @info: HW register and features supported by this sub-blk
+ */
+struct dpu_dsc_blk {
+ DPU_HW_SUBBLK_INFO;
+};
+
+/**
* enum dpu_qos_lut_usage - define QoS LUT use cases
*/
enum dpu_qos_lut_usage {
@@ -403,6 +426,7 @@ struct dpu_rotation_cfg {
* @pixel_ram_size size of latency hiding and de-tiling buffer in bytes
* @max_hdeci_exp max horizontal decimation supported (max is 2^value)
* @max_vdeci_exp max vertical decimation supported (max is 2^value)
+ * @max_dsc_width max dsc line width support.
DSC*
*/
struct dpu_caps {
u32 max_mixer_width;
@@ -419,6 +443,7 @@ struct dpu_caps {
u32 pixel_ram_size;
u32 max_hdeci_exp;
u32 max_vdeci_exp;
+ u32 max_dsc_width;
This is never read.
};
/**
@@ -494,9 +519,20 @@ struct dpu_dspp_sub_blks {
struct dpu_pingpong_sub_blks {
struct dpu_pp_blk te;
struct dpu_pp_blk te2;
+ struct dpu_pp_blk dsc;
Unused.
struct dpu_pp_blk dither;
};
+
+/**
+ * struct dpu_dsc_sub_blks : DSC sub-blks
+ *
A sub-block of sub-blocks? Use the documentation to explain what this
is for, describe @enc and @ctl.
+ */
+struct dpu_dsc_sub_blks {
+ struct dpu_dsc_blk enc;
+ struct dpu_dsc_blk ctl;
+};
+
/**
* dpu_clk_ctrl_type - Defines top level clock control signals
*/
@@ -641,10 +677,14 @@ struct dpu_merge_3d_cfg {
* struct dpu_dsc_cfg - information of DSC blocks
* @id enum identifying this block
* @base register offset of this block
+ * @len: length of hardware block
* @features bit mask identifying sub-blocks/features
+ * @dsc_pair_mask: Bitmask of DSCs that can be controlled by same CTL
*/
struct dpu_dsc_cfg {
DPU_HW_BLK_INFO;
+ DECLARE_BITMAP(dsc_pair_mask, DSC_MAX);
This bitmask is unused.
+ const struct dpu_dsc_sub_blks *sblk;
};
/**
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
index 619926d..51e8890 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2020-2022, Linaro Limited
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved
*/
#include "dpu_kms.h"
@@ -41,10 +42,11 @@ static void dpu_hw_dsc_disable(struct dpu_hw_dsc *dsc)
static void dpu_hw_dsc_config(struct dpu_hw_dsc *hw_dsc,
struct drm_dsc_config *dsc,
u32 mode,
- u32 initial_lines)
+ u32 initial_lines,
+ bool ich_reset_override)
{
struct dpu_hw_blk_reg_map *c = &hw_dsc->hw;
- u32 data;
+ u32 data, lsb, bpp;
u32 slice_last_group_size;
u32 det_thresh_flatness;
bool is_cmd_mode = !(mode & DSC_MODE_VIDEO);
@@ -58,7 +60,14 @@ static void dpu_hw_dsc_config(struct dpu_hw_dsc *hw_dsc,
data = (initial_lines << 20);
data |= ((slice_last_group_size - 1) << 18);
/* bpp is 6.4 format, 4 LSBs bits are for fractional part */
- data |= (dsc->bits_per_pixel << 8);
+ data |= dsc->bits_per_pixel << 12;
+ lsb = dsc->bits_per_pixel % 4;
+ bpp = dsc->bits_per_pixel / 4;
+ bpp *= 4;
+ bpp <<= 4;
+ bpp |= lsb;
+
+ data |= bpp << 8;
Why are you re-adding this nonsense? It was removed in [1] _and_ does
not account for bits_per_pixel _already being in x.4 format_. This will
regress existing hardware.
[1]:
https://lore.kernel.org/linux-arm-msm/20221026182824.876933-10-marijn.suij...@somainline.org/
data |= (dsc->block_pred_enable << 7);
data |= (dsc->line_buf_depth << 3);
data |= (dsc->simple_422 << 2);
@@ -221,7 +230,13 @@ struct dpu_hw_dsc *dpu_hw_dsc_init(enum dpu_dsc idx, void
__iomem *addr,
c->idx = idx;
c->caps = cfg;
- _setup_dsc_ops(&c->ops, c->caps->features);
+
+ if (test_bit(DPU_DSC_HW_REV_1_1, &c->caps->features))
+ _setup_dsc_ops(&c->ops, c->caps->features);
+ else if (test_bit(DPU_DSC_HW_REV_1_2, &c->caps->features))
+ dpu_dsc_1_2_setup_ops(&c->ops, c->caps->features);
+ else
+ _setup_dsc_ops(&c->ops, c->caps->features);
return c;
}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
index ae9b5db..a48f572 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
@@ -1,5 +1,8 @@
/* SPDX-License-Identifier: GPL-2.0-only */
-/* Copyright (c) 2020-2022, Linaro Limited */
+/*
+ * Copyright (c) 2020-2022, Linaro Limited
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved
+ */
#ifndef _DPU_HW_DSC_H
#define _DPU_HW_DSC_H
@@ -33,7 +36,8 @@ struct dpu_hw_dsc_ops {
void (*dsc_config)(struct dpu_hw_dsc *hw_dsc,
struct drm_dsc_config *dsc,
u32 mode,
- u32 initial_lines);
+ u32 initial_lines,
+ bool ich_reset_override);
/**
* dsc_config_thresh - programs panel thresholds
@@ -43,6 +47,12 @@ struct dpu_hw_dsc_ops {
void (*dsc_config_thresh)(struct dpu_hw_dsc *hw_dsc,
struct drm_dsc_config *dsc);
+ /**
+ * bind_pingpong_blk - enable/disable the connection with pp
Inherit docs from the enum.
+ * @hw_dsc: Pointer to dsc context
DSC*
+ * @enable: enable/disable connection
+ * @pp: pingpong blk id
It's documentation, write out block fully.
+ */
void (*dsc_bind_pingpong_blk)(struct dpu_hw_dsc *hw_dsc,
bool enable,
enum dpu_pingpong pp);
@@ -51,6 +61,7 @@ struct dpu_hw_dsc_ops {
struct dpu_hw_dsc {
struct dpu_hw_blk base;
struct dpu_hw_blk_reg_map hw;
+ struct dpu_hw_ctl *hw_ctl;
Unused.
/* dsc */
enum dpu_dsc idx;
@@ -76,9 +87,17 @@ struct dpu_hw_dsc *dpu_hw_dsc_init(enum dpu_dsc idx, void
__iomem *addr,
*/
void dpu_hw_dsc_destroy(struct dpu_hw_dsc *dsc);
+/**
+ * dpu_hw_dsc - convert base object dpu_hw_base to container
+ * @hw: Pointer to base hardware block
+ * return: Pointer to hardware block container
+ */
static inline struct dpu_hw_dsc *to_dpu_hw_dsc(struct dpu_hw_blk *hw)
{
return container_of(hw, struct dpu_hw_dsc, base);
}
+void dpu_dsc_1_2_setup_ops(struct dpu_hw_dsc_ops *ops,
+ const unsigned long features);
+
#endif /* _DPU_HW_DSC_H */
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
new file mode 100644
index 00000000..2be74ae
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc_1_2.c
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved
+ */
+
+#include "dpu_kms.h"
+#include "dpu_hw_catalog.h"
+#include "dpu_hwio.h"
+#include "dpu_hw_mdss.h"
+#include "dpu_hw_dsc.h"
+
+
+#define DSC_CMN_MAIN_CNF 0x00
+
+/* DPU_DSC_ENC register offsets */
+#define ENC_DF_CTRL 0x00
+#define ENC_GENERAL_STATUS 0x04
+#define ENC_HSLICE_STATUS 0x08
+#define ENC_OUT_STATUS 0x0C
+#define ENC_INT_STAT 0x10
+#define ENC_INT_CLR 0x14
+#define ENC_INT_MASK 0x18
+#define DSC_MAIN_CONF 0x30
+#define DSC_PICTURE_SIZE 0x34
+#define DSC_SLICE_SIZE 0x38
+#define DSC_MISC_SIZE 0x3C
+#define DSC_HRD_DELAYS 0x40
+#define DSC_RC_SCALE 0x44
+#define DSC_RC_SCALE_INC_DEC 0x48
+#define DSC_RC_OFFSETS_1 0x4C
+#define DSC_RC_OFFSETS_2 0x50
+#define DSC_RC_OFFSETS_3 0x54
+#define DSC_RC_OFFSETS_4 0x58
+#define DSC_FLATNESS_QP 0x5C
+#define DSC_RC_MODEL_SIZE 0x60
+#define DSC_RC_CONFIG 0x64
+#define DSC_RC_BUF_THRESH_0 0x68
+#define DSC_RC_BUF_THRESH_1 0x6C
+#define DSC_RC_BUF_THRESH_2 0x70
+#define DSC_RC_BUF_THRESH_3 0x74
+#define DSC_RC_MIN_QP_0 0x78
+#define DSC_RC_MIN_QP_1 0x7C
+#define DSC_RC_MIN_QP_2 0x80
+#define DSC_RC_MAX_QP_0 0x84
+#define DSC_RC_MAX_QP_1 0x88
+#define DSC_RC_MAX_QP_2 0x8C
+#define DSC_RC_RANGE_BPG_OFFSETS_0 0x90
+#define DSC_RC_RANGE_BPG_OFFSETS_1 0x94
+#define DSC_RC_RANGE_BPG_OFFSETS_2 0x98
Reindent to line this back up.
+
+/* DPU_DSC_CTL register offsets */
+#define DSC_CTL 0x00
+#define DSC_CFG 0x04
+#define DSC_DATA_IN_SWAP 0x08
+#define DSC_CLK_CTRL 0x0C
+
+
+static int _dsc_calc_ob_max_addr(struct dpu_hw_dsc *hw_dsc, int num_ss)
+{
+ enum dpu_dsc idx;
+
+ idx = hw_dsc->idx;
+
+ if (!(hw_dsc->caps->features & BIT(DPU_DSC_NATIVE_422_EN))) {
Why not swap the bodies instead of inverting this.
+ if (num_ss == 1)
+ return 2399;
+ else if (num_ss == 2)
+ return 1199;
+ } else {
+ if (num_ss == 1)
+ return 1199;
+ else if (num_ss == 2)
+ return 599;
+ }
+ return 0;
+}
+
+static inline int _dsc_subblk_offset(struct dpu_hw_dsc *hw_dsc, int s_id,
+ u32 *idx)
+{
+ const struct dpu_dsc_sub_blks *sblk;
+
+ if (!hw_dsc)
+ return -EINVAL;
+
+ *idx = 0;
+
+ sblk = hw_dsc->caps->sblk;
+
+ switch (s_id) {
+
+ case DPU_DSC_ENC:
+ *idx = sblk->enc.base;
+ break;
+ case DPU_DSC_CTL:
+ *idx = sblk->ctl.base;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void dpu_hw_dsc_disable_1_2(struct dpu_hw_dsc *hw_dsc)
+{
+ struct dpu_hw_blk_reg_map *hw;
+ u32 idx;
Can we rename these to offset or subblk_offset or something more clear?
+
+ if (!hw_dsc)
+ return;
+
+ if (_dsc_subblk_offset(hw_dsc, DPU_DSC_CTL, &idx))
+ return;
These error checks are excessive: you pass in a non-null hw_dsc and
known enum constant - _dsc_subblk_offset should perhaps not return
errors at all.
+
+ hw = &hw_dsc->hw;
+ DPU_REG_WRITE(hw, DSC_CFG + idx, 0);
Swap the arguments to + so that it's clear that DSC_CFG is a register on
the subblock offset denoted by "idx", not the other way around.
+
+ if (_dsc_subblk_offset(hw_dsc, DPU_DSC_ENC, &idx))
+ return;
+
+ DPU_REG_WRITE(hw, ENC_DF_CTRL + idx, 0);
+ DPU_REG_WRITE(hw, DSC_MAIN_CONF + idx, 0);
+}
+
+static void dpu_hw_dsc_config_1_2(struct dpu_hw_dsc *hw_dsc,
+ struct drm_dsc_config *dsc, u32 mode,
+ u32 initial_lines, bool ich_reset_override)
+{
+ struct dpu_hw_blk_reg_map *hw;
+ struct msm_display_dsc_info *dsc_info;
+ u32 idx;
+ u32 data = 0;
+ u32 bpp;
+ void __iomem *off;
+
+ if (!hw_dsc || !dsc)
+ return;
+
+ hw = &hw_dsc->hw;
+
+ dsc_info = to_msm_dsc_info(dsc);
+
+ if (_dsc_subblk_offset(hw_dsc, DPU_DSC_ENC, &idx))
+ return;
+
+ if (mode & DSC_MODE_SPLIT_PANEL)
+ data |= BIT(0);
+
+ if (mode & DSC_MODE_MULTIPLEX)
+ data |= BIT(1);
These are well known bitwise definitions for a reason, data |= mode will
do (or out DSC_MODE_VIDEO since you have to shift that one at BIT(9).
+
+ data |= (dsc_info->num_active_ss_per_enc & 0x3) << 7;
+
+ DPU_REG_WRITE(hw, DSC_CMN_MAIN_CNF, data);
+
+ data = (dsc_info->initial_lines & 0xff);
You already get initial_lines passed as function argument, but ignore
it?
+ data |= ((mode & DSC_MODE_VIDEO) ? 1 : 0) << 9;
Yuck. if (mode & DSC_MODE_VIDEO) data |= BIT(9);.
+ if (ich_reset_override)
+ data |= 0xC00; // set bit 10 and 11
Instead of a comment, make this self-describing BIT(10) | BIT(11) code.
+ data |= (_dsc_calc_ob_max_addr(hw_dsc, dsc_info->num_active_ss_per_enc)
<< 18);
+
+ DPU_REG_WRITE(hw, ENC_DF_CTRL + idx, data);
+
+ data = (dsc->dsc_version_minor & 0xf) << 28;
+ if (dsc->dsc_version_minor == 0x2) {
+ if (dsc->native_422)
+ data |= BIT(22);
+ if (dsc->native_420)
+ data |= BIT(21);
+ }
+
+ bpp = dsc->bits_per_pixel;
As above, don't forget to read the documentation on this field:
Target bits per pixel with 4 fractional bits, bits_per_pixel << 4
+ /* as per hw requirement bpp should be programmed
+ * twice the actual value in case of 420 or 422 encoding
+ */
+ if (dsc->native_422 || dsc->native_420)
+ bpp = 2 * bpp;
+ data |= (dsc->block_pred_enable ? 1 : 0) << 20;
+ data |= (bpp << 10);
Either wrap everything or nothing in ().
+ data |= (dsc->line_buf_depth & 0xf) << 6;
+ data |= dsc->convert_rgb << 4;
+ data |= dsc->bits_per_component & 0xf;
+
+ DPU_REG_WRITE(hw, DSC_MAIN_CONF + idx, data);
+
+ data = (dsc->pic_width & 0xffff) |
+ ((dsc->pic_height & 0xffff) << 16);
+
+ DPU_REG_WRITE(hw, DSC_PICTURE_SIZE + idx, data);
+
+ data = (dsc->slice_width & 0xffff) |
+ ((dsc->slice_height & 0xffff) << 16);
+
+ DPU_REG_WRITE(hw, DSC_SLICE_SIZE + idx, data);
+
+ DPU_REG_WRITE(hw, DSC_MISC_SIZE + idx,
+ (dsc->slice_chunk_size) & 0xffff);
+
+ data = (dsc->initial_xmit_delay & 0xffff) |
+ ((dsc->initial_dec_delay & 0xffff) << 16);
+
+ DPU_REG_WRITE(hw, DSC_HRD_DELAYS + idx, data);
+
+ DPU_REG_WRITE(hw, DSC_RC_SCALE + idx,
+ dsc->initial_scale_value & 0x3f);
+
+ data = (dsc->scale_increment_interval & 0xffff) |
+ ((dsc->scale_decrement_interval & 0x7ff) << 16);
+
+ DPU_REG_WRITE(hw, DSC_RC_SCALE_INC_DEC + idx, data);
+
+ data = (dsc->first_line_bpg_offset & 0x1f) |
+ ((dsc->second_line_bpg_offset & 0x1f) << 5);
+
+ DPU_REG_WRITE(hw, DSC_RC_OFFSETS_1 + idx, data);
+
+ data = (dsc->nfl_bpg_offset & 0xffff) |
+ ((dsc->slice_bpg_offset & 0xffff) << 16);
+
+ DPU_REG_WRITE(hw, DSC_RC_OFFSETS_2 + idx, data);
+
+ data = (dsc->initial_offset & 0xffff) |
+ ((dsc->final_offset & 0xffff) << 16);
+
+ DPU_REG_WRITE(hw, DSC_RC_OFFSETS_3 + idx, data);
+
+ data = (dsc->nsl_bpg_offset & 0xffff) |
+ ((dsc->second_line_offset_adj & 0xffff) << 16);
+
+ DPU_REG_WRITE(hw, DSC_RC_OFFSETS_4 + idx, data);
+
+ data = (dsc->flatness_min_qp & 0x1f);
+ data |= (dsc->flatness_max_qp & 0x1f) << 5;
+ data |= (dsc_info->det_thresh_flatness & 0xff) << 10;
dpu_hw_dsc.c computes this on the fly. After removing that, and
using initial_lines from the function parameters, only
dsc_info->num_active_ss_per_enc remains. Do you really need that
msm_display_dsc_info struct here, do you need it at all?
+
+ DPU_REG_WRITE(hw, DSC_FLATNESS_QP + idx, data);
+
+ DPU_REG_WRITE(hw, DSC_RC_MODEL_SIZE + idx,
+ (dsc->rc_model_size) & 0xffff);
+
+ data = dsc->rc_edge_factor & 0xf;
+ data |= (dsc->rc_quant_incr_limit0 & 0x1f) << 8;
+ data |= (dsc->rc_quant_incr_limit1 & 0x1f) << 13;
+ data |= (dsc->rc_tgt_offset_high & 0xf) << 20;
+ data |= (dsc->rc_tgt_offset_low & 0xf) << 24;
+
+ DPU_REG_WRITE(hw, DSC_RC_CONFIG + idx, data);
+
+ /* program the dsc wrapper */
+ if (_dsc_subblk_offset(hw_dsc, DPU_DSC_CTL, &idx))
+ return;
+
+ off = hw->blk_addr + idx;
+
+ data = BIT(0); /* encoder enable */
+ if (dsc->native_422)
+ data |= BIT(8);
+ else if (dsc->native_420)
+ data |= BIT(9);
+ if (!dsc->convert_rgb)
+ data |= BIT(10);
+ if (dsc->bits_per_component == 8)
+ data |= BIT(11);
+ if (mode & DSC_MODE_SPLIT_PANEL)
+ data |= BIT(12);
+ if (mode & DSC_MODE_MULTIPLEX)
+ data |= BIT(13);
+ if (!(mode & DSC_MODE_VIDEO))
+ data |= BIT(17);
+
+ if (dsc_info->dsc_4hsmerge_en) {
+ data |= dsc_info->dsc_4hsmerge_padding << 18;
+ data |= dsc_info->dsc_4hsmerge_alignment << 22;
+ data |= BIT(16);
+ }
+
+ DPU_REG_WRITE(hw, DSC_CFG + idx, data);
+
+// DPU_REG_WRITE(hw, DSC_DATA_IN_SWAP + idx, 0x14e5);
No commented-out code please, especially not with //
+}
+
+static void dpu_hw_dsc_config_thresh_1_2(struct dpu_hw_dsc *hw_dsc,
+ struct drm_dsc_config *dsc)
+{
+ struct dpu_hw_blk_reg_map *hw;
+ struct msm_display_dsc_info *dsc_info;
+ u32 idx, off;
+ int i, j = 0;
+ struct drm_dsc_rc_range_parameters *rc;
+ u32 data = 0, min_qp = 0, max_qp = 0, bpg_off = 0;
+
+ if (!hw_dsc || !dsc)
+ return;
+
+ if (_dsc_subblk_offset(hw_dsc, DPU_DSC_ENC, &idx))
+ return;
+
+ hw = &hw_dsc->hw;
+
+ dsc_info = to_msm_dsc_info(dsc);
+
+ rc = dsc->rc_range_params;
+
+ off = 0;
+ for (i = 0; i < DSC_NUM_BUF_RANGES - 1; i++) {
+ data |= dsc->rc_buf_thresh[i] << (8*j);
Lack of spaces does not make this multiplication any prettier to read.
* has precedence over << but it's better to replicate the () below as
well.
+ j++;
+ if ((j == 4) || (i == DSC_NUM_BUF_RANGES - 2)) {
+ DPU_REG_WRITE(hw, DSC_RC_BUF_THRESH_0 + idx + off,
+ data);
+ off += 4;
+ j = 0;
+ data = 0;
+ }
+ }
+
+ off = 0;
+ for (i = 0; i < DSC_NUM_BUF_RANGES; i++) {
+ min_qp |= (rc[i].range_min_qp & 0x1f) << 5*j;
+ max_qp |= (rc[i].range_max_qp & 0x1f) << 5*j;
+ bpg_off |= (rc[i].range_bpg_offset & 0x3f) << 6*j;
These values _must_ already be masked to be useful in
drm_dsc_compute_rc_parameters(), no need to mask them again just like
the v1.1 block implementation.
+ j++;
+ if (j == 5) {
+ DPU_REG_WRITE(hw, DSC_RC_MIN_QP_0 + idx + off,
+ min_qp);
+ DPU_REG_WRITE(hw, DSC_RC_MAX_QP_0 + idx + off,
+ max_qp);
+ DPU_REG_WRITE(hw,
+ DSC_RC_RANGE_BPG_OFFSETS_0 + idx + off,
+ bpg_off);
+ off += 4;
+ j = 0;
+ min_qp = 0;
+ max_qp = 0;
+ bpg_off = 0;
+ }
+ }
+}
+
+static void dpu_hw_dsc_bind_pingpong_blk_1_2(
+ struct dpu_hw_dsc *hw_dsc,
+ bool enable,
+ const enum dpu_pingpong pp)
+{
+ struct dpu_hw_blk_reg_map *hw;
+ int idx;
+ int mux_cfg = 0xF; /* Disabled */
Lowercase hex (and anywhere else if I skipped any).
+
+ if (!hw_dsc)
+ return;
As with the v1.1 implementation, we don't check this, and your function
below also checks it (but it does not need to).
+ if (_dsc_subblk_offset(hw_dsc, DPU_DSC_CTL, &idx))
+ return;
+
+ hw = &hw_dsc->hw;
+ if (enable)
+ mux_cfg = (pp - PINGPONG_0) & 0x7;
+
+ DPU_REG_WRITE(hw, DSC_CTL + idx, mux_cfg);
+}
+
+void dpu_dsc_1_2_setup_ops(struct dpu_hw_dsc_ops *ops,
+ const unsigned long features)
+{
+ ops->dsc_disable = dpu_hw_dsc_disable_1_2;
+ ops->dsc_config = dpu_hw_dsc_config_1_2;
+ ops->dsc_config_thresh = dpu_hw_dsc_config_thresh_1_2;
+ ops->dsc_bind_pingpong_blk = dpu_hw_dsc_bind_pingpong_blk_1_2;
+}
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
All in all you really need to revise and clean your patches before
sending them to the lists; these are already far too many comments and
nits, and massively take away from reviewing code behaviour which I have
not even started with after looking at 1 out of 14 patches :(
- Marijn
