[PATCH] drm/bridge: anx7625: Use common macros for DP power sequencing commands

[Chen-Yu Tsai]

The DRM DP code has macros for the DP power sequencing commands. Use
them in the anx7625 driver instead of raw numbers.

Fixes: 548b512e144f ("drm/bridge: anx7625: send DPCD command to downstream")
Fixes: 27f26359de9b ("drm/bridge: anx7625: Set downstream sink into normal 
status")
Signed-off-by: Chen-Yu Tsai <we...@chromium.org>
---
This is a minor cleanup. No functional changes.

 drivers/gpu/drm/bridge/analogix/anx7625.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c 
b/drivers/gpu/drm/bridge/analogix/anx7625.c
index 808dbf79d209..7e1fb93a6ce4 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -935,8 +935,8 @@ static void anx7625_dp_start(struct anx7625_data *ctx)
 
        dev_dbg(dev, "set downstream sink into normal\n");
        /* Downstream sink enter into normal mode */
-       data = 1;
-       ret = anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, 0x000600, 1, &data);
+       data = DP_SET_POWER_D0;
+       ret = anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, DP_SET_POWER, 1, 
&data);
        if (ret < 0)
                dev_err(dev, "IO error : set sink into normal mode fail\n");
 
@@ -975,8 +975,8 @@ static void anx7625_dp_stop(struct anx7625_data *ctx)
 
        dev_dbg(dev, "notify downstream enter into standby\n");
        /* Downstream monitor enter into standby mode */
-       data = 2;
-       ret |= anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, 0x000600, 1, &data);
+       data = DP_SET_POWER_D3;
+       ret |= anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, DP_SET_POWER, 1, 
&data);
        if (ret < 0)
                DRM_DEV_ERROR(dev, "IO error : mute video fail\n");
 
-- 
2.39.0.314.g84b9a713c41-goog