Use generic node name for rk3399.dtsi dsi node.
With the conversion of rockchip,dw-mipi-dsi.yaml a port@1 node
is required, so add a node with label mipi_out.

Signed-off-by: Johan Jonker <jbx6...@gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi 
b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 834d16acb..62047a5a0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1954,7 +1954,7 @@
                };
        };

-       mipi_dsi: mipi@ff960000 {
+       mipi_dsi: dsi@ff960000 {
                compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
                reg = <0x0 0xff960000 0x0 0x8000>;
                interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -1987,10 +1987,14 @@
                                        remote-endpoint = <&vopl_out_mipi>;
                                };
                        };
+
+                       mipi_out: port@1 {
+                               reg = <1>;
+                       };
                };
        };

-       mipi_dsi1: mipi@ff968000 {
+       mipi_dsi1: dsi@ff968000 {
                compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
                reg = <0x0 0xff968000 0x0 0x8000>;
                interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2025,6 +2029,10 @@
                                        remote-endpoint = <&vopl_out_mipi1>;
                                };
                        };
+
+                       mipi1_out: port@1 {
+                               reg = <1>;
+                       };
                };
        };

--
2.20.1

Reply via email to