On Mon, Oct 24, 2022 at 03:33:44PM +0300, Jani Nikula wrote:
> Convert to drm_kms_dbg/drm_err where possible, and reference the
> connector using [CONNECTOR:%d:%s]. Pass connectors around a bit more to
> enable this. Where this is not possible, unify the rest of the debugs to
> DRM_DEBUG_KMS.
>
> Rewrite tile debug logging to one line while at it.
>
> v2:
> - Use [CONNECTOR:%d:%s] throughout (Ville)
> - Tile debug logging revamp
> - Pass connector around a bit more
>
> Signed-off-by: Jani Nikula <jani.nik...@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
> ---
> drivers/gpu/drm/drm_edid.c | 137 +++++++++++++++++++++----------------
> 1 file changed, 77 insertions(+), 60 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index 3be98ac2e711..b2d61c05f559 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -1979,7 +1979,7 @@ bool drm_edid_block_valid(u8 *_block, int block_num,
> bool print_bad_edid,
>
> status = edid_block_check(block, is_base_block);
> if (status == EDID_BLOCK_HEADER_REPAIR) {
> - DRM_DEBUG("Fixing EDID header, your hardware may be failing\n");
> + DRM_DEBUG_KMS("Fixing EDID header, your hardware may be
> failing\n");
> edid_header_fix(block);
>
> /* Retry with fixed header, update status if that worked. */
> @@ -2301,8 +2301,9 @@ int drm_edid_override_connector_update(struct
> drm_connector *connector)
>
> drm_edid_free(override);
>
> - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] adding %d modes via fallback
> override/firmware EDID\n",
> - connector->base.id, connector->name, num_modes);
> + drm_dbg_kms(connector->dev,
> + "[CONNECTOR:%d:%s] adding %d modes via fallback
> override/firmware EDID\n",
> + connector->base.id, connector->name, num_modes);
> }
>
> return num_modes;
> @@ -3388,11 +3389,12 @@ drm_mode_do_interlace_quirk(struct drm_display_mode
> *mode,
> * timing block contains enough info for us to create and return a new struct
> * drm_display_mode.
> */
> -static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
> +static struct drm_display_mode *drm_mode_detailed(struct drm_connector
> *connector,
> const struct drm_edid
> *drm_edid,
> const struct detailed_timing
> *timing,
> u32 quirks)
> {
> + struct drm_device *dev = connector->dev;
> struct drm_display_mode *mode;
> const struct detailed_pixel_timing *pt = &timing->data.pixel_data;
> unsigned hactive = (pt->hactive_hblank_hi & 0xf0) << 4 | pt->hactive_lo;
> @@ -3409,17 +3411,19 @@ static struct drm_display_mode
> *drm_mode_detailed(struct drm_device *dev,
> return NULL;
>
> if (pt->misc & DRM_EDID_PT_STEREO) {
> - DRM_DEBUG_KMS("stereo mode not supported\n");
> + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] Stereo mode not
> supported\n",
> + connector->base.id, connector->name);
> return NULL;
> }
> if (!(pt->misc & DRM_EDID_PT_SEPARATE_SYNC)) {
> - DRM_DEBUG_KMS("composite sync not supported\n");
> + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] Composite sync not
> supported\n",
> + connector->base.id, connector->name);
> }
>
> /* it is incorrect if hsync/vsync width is zero */
> if (!hsync_pulse_width || !vsync_pulse_width) {
> - DRM_DEBUG_KMS("Incorrect Detailed timing. "
> - "Wrong Hsync/Vsync pulse width\n");
> + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] Incorrect Detailed timing.
> Wrong Hsync/Vsync pulse width\n",
> + connector->base.id, connector->name);
> return NULL;
> }
>
> @@ -3976,7 +3980,8 @@ add_cvt_modes(struct drm_connector *connector, const
> struct drm_edid *drm_edid)
> return closure.modes;
> }
>
> -static void fixup_detailed_cea_mode_clock(struct drm_display_mode *mode);
> +static void fixup_detailed_cea_mode_clock(struct drm_connector *connector,
> + struct drm_display_mode *mode);
>
> static void
> do_detailed_mode(const struct detailed_timing *timing, void *c)
> @@ -3987,7 +3992,7 @@ do_detailed_mode(const struct detailed_timing *timing,
> void *c)
> if (!is_detailed_timing_descriptor(timing))
> return;
>
> - newmode = drm_mode_detailed(closure->connector->dev,
> + newmode = drm_mode_detailed(closure->connector,
> closure->drm_edid, timing,
> closure->quirks);
> if (!newmode)
> @@ -4001,7 +4006,7 @@ do_detailed_mode(const struct detailed_timing *timing,
> void *c)
> * so fix up anything that looks like CEA/HDMI mode, but the clock
> * is just slightly off.
> */
> - fixup_detailed_cea_mode_clock(newmode);
> + fixup_detailed_cea_mode_clock(closure->connector, newmode);
>
> drm_mode_probed_add(closure->connector, newmode);
> closure->modes++;
> @@ -4663,7 +4668,8 @@ static int add_hdmi_mode(struct drm_connector
> *connector, u8 vic)
> struct drm_display_mode *newmode;
>
> if (!drm_valid_hdmi_vic(vic)) {
> - DRM_ERROR("Unknown HDMI VIC: %d\n", vic);
> + drm_err(connector->dev, "[CONNECTOR:%d:%s] Unknown HDMI VIC:
> %d\n",
> + connector->base.id, connector->name, vic);
> return 0;
> }
>
> @@ -5270,7 +5276,8 @@ static int add_cea_modes(struct drm_connector
> *connector,
> return modes;
> }
>
> -static void fixup_detailed_cea_mode_clock(struct drm_display_mode *mode)
> +static void fixup_detailed_cea_mode_clock(struct drm_connector *connector,
> + struct drm_display_mode *mode)
> {
> const struct drm_display_mode *cea_mode;
> int clock1, clock2, clock;
> @@ -5308,8 +5315,10 @@ static void fixup_detailed_cea_mode_clock(struct
> drm_display_mode *mode)
> if (mode->clock == clock)
> return;
>
> - DRM_DEBUG("detailed mode matches %s VIC %d, adjusting clock %d -> %d\n",
> - type, vic, mode->clock, clock);
> + drm_dbg_kms(connector->dev,
> + "[CONNECTOR:%d:%s] detailed mode matches %s VIC %d,
> adjusting clock %d -> %d\n",
> + connector->base.id, connector->name,
> + type, vic, mode->clock, clock);
> mode->clock = clock;
> }
>
> @@ -5417,15 +5426,12 @@ drm_parse_hdmi_vsdb_audio(struct drm_connector
> *connector, const u8 *db)
> if (len >= 12)
> connector->audio_latency[1] = db[12];
>
> - DRM_DEBUG_KMS("HDMI: latency present %d %d, "
> - "video latency %d %d, "
> - "audio latency %d %d\n",
> - connector->latency_present[0],
> - connector->latency_present[1],
> - connector->video_latency[0],
> - connector->video_latency[1],
> - connector->audio_latency[0],
> - connector->audio_latency[1]);
> + drm_dbg_kms(connector->dev,
> + "[CONNECTOR:%d:%s] HDMI: latency present %d %d, video
> latency %d %d, audio latency %d %d\n",
> + connector->base.id, connector->name,
> + connector->latency_present[0],
> connector->latency_present[1],
> + connector->video_latency[0], connector->video_latency[1],
> + connector->audio_latency[0], connector->audio_latency[1]);
> }
>
> static void
> @@ -5523,7 +5529,9 @@ static void drm_edid_to_eld(struct drm_connector
> *connector,
> return;
>
> mnl = get_monitor_name(drm_edid, &eld[DRM_ELD_MONITOR_NAME_STRING]);
> - DRM_DEBUG_KMS("ELD monitor %s\n", &eld[DRM_ELD_MONITOR_NAME_STRING]);
> + drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] ELD monitor %s\n",
> + connector->base.id, connector->name,
> + &eld[DRM_ELD_MONITOR_NAME_STRING]);
>
> eld[DRM_ELD_CEA_EDID_VER_MNL] = info->cea_rev <<
> DRM_ELD_CEA_EDID_VER_SHIFT;
> eld[DRM_ELD_CEA_EDID_VER_MNL] |= mnl;
> @@ -5577,8 +5585,9 @@ static void drm_edid_to_eld(struct drm_connector
> *connector,
> eld[DRM_ELD_BASELINE_ELD_LEN] =
> DIV_ROUND_UP(drm_eld_calc_baseline_block_size(eld), 4);
>
> - DRM_DEBUG_KMS("ELD size %d, SAD count %d\n",
> - drm_eld_size(eld), total_sad_count);
> + drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] ELD size %d, SAD count
> %d\n",
> + connector->base.id, connector->name,
> + drm_eld_size(eld), total_sad_count);
> }
>
> static int _drm_edid_to_sad(const struct drm_edid *drm_edid,
> @@ -5849,7 +5858,8 @@ static void drm_parse_vcdb(struct drm_connector
> *connector, const u8 *db)
> {
> struct drm_display_info *info = &connector->display_info;
>
> - DRM_DEBUG_KMS("CEA VCDB 0x%02x\n", db[2]);
> + drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] CEA VCDB 0x%02x\n",
> + connector->base.id, connector->name, db[2]);
>
> if (db[2] & EDID_CEA_VCDB_QS)
> info->rgb_quant_range_selectable = true;
> @@ -6052,39 +6062,39 @@ static void drm_parse_hdmi_deep_color_info(struct
> drm_connector *connector,
> if (hdmi[6] & DRM_EDID_HDMI_DC_30) {
> dc_bpc = 10;
> info->edid_hdmi_rgb444_dc_modes |= DRM_EDID_HDMI_DC_30;
> - DRM_DEBUG("%s: HDMI sink does deep color 30.\n",
> - connector->name);
> + drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] HDMI sink does
> deep color 30.\n",
> + connector->base.id, connector->name);
> }
>
> if (hdmi[6] & DRM_EDID_HDMI_DC_36) {
> dc_bpc = 12;
> info->edid_hdmi_rgb444_dc_modes |= DRM_EDID_HDMI_DC_36;
> - DRM_DEBUG("%s: HDMI sink does deep color 36.\n",
> - connector->name);
> + drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] HDMI sink does
> deep color 36.\n",
> + connector->base.id, connector->name);
> }
>
> if (hdmi[6] & DRM_EDID_HDMI_DC_48) {
> dc_bpc = 16;
> info->edid_hdmi_rgb444_dc_modes |= DRM_EDID_HDMI_DC_48;
> - DRM_DEBUG("%s: HDMI sink does deep color 48.\n",
> - connector->name);
> + drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] HDMI sink does
> deep color 48.\n",
> + connector->base.id, connector->name);
> }
>
> if (dc_bpc == 0) {
> - DRM_DEBUG("%s: No deep color support on this HDMI sink.\n",
> - connector->name);
> + drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] No deep color
> support on this HDMI sink.\n",
> + connector->base.id, connector->name);
> return;
> }
>
> - DRM_DEBUG("%s: Assigning HDMI sink color depth as %d bpc.\n",
> - connector->name, dc_bpc);
> + drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] Assigning HDMI sink
> color depth as %d bpc.\n",
> + connector->base.id, connector->name, dc_bpc);
> info->bpc = dc_bpc;
>
> /* YCRCB444 is optional according to spec. */
> if (hdmi[6] & DRM_EDID_HDMI_DC_Y444) {
> info->edid_hdmi_ycbcr444_dc_modes =
> info->edid_hdmi_rgb444_dc_modes;
> - DRM_DEBUG("%s: HDMI sink does YCRCB444 in deep color.\n",
> - connector->name);
> + drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] HDMI sink does
> YCRCB444 in deep color.\n",
> + connector->base.id, connector->name);
> }
>
> /*
> @@ -6092,8 +6102,8 @@ static void drm_parse_hdmi_deep_color_info(struct
> drm_connector *connector,
> * then deep color 36 bit must be supported.
> */
> if (!(hdmi[6] & DRM_EDID_HDMI_DC_36)) {
> - DRM_DEBUG("%s: HDMI sink should do DC_36, but does not!\n",
> - connector->name);
> + drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] HDMI sink should
> do DC_36, but does not!\n",
> + connector->base.id, connector->name);
> }
> }
>
> @@ -6110,10 +6120,9 @@ drm_parse_hdmi_vsdb_video(struct drm_connector
> *connector, const u8 *db)
> if (len >= 7)
> info->max_tmds_clock = db[7] * 5000;
>
> - DRM_DEBUG_KMS("HDMI: DVI dual %d, "
> - "max TMDS clock %d kHz\n",
> - info->dvi_dual,
> - info->max_tmds_clock);
> + drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] HDMI: DVI dual %d, max
> TMDS clock %d kHz\n",
> + connector->base.id, connector->name,
> + info->dvi_dual, info->max_tmds_clock);
>
> drm_parse_hdmi_deep_color_info(connector, db);
> }
> @@ -6156,8 +6165,10 @@ static void drm_parse_cea_ext(struct drm_connector
> *connector,
> info->cea_rev = edid_ext[1];
>
> if (info->cea_rev != edid_ext[1])
> - DRM_DEBUG_KMS("CEA extension version mismatch %u !=
> %u\n",
> - info->cea_rev, edid_ext[1]);
> + drm_dbg_kms(connector->dev,
> + "[CONNECTOR:%d:%s] CEA extension version
> mismatch %u != %u\n",
> + connector->base.id, connector->name,
> + info->cea_rev, edid_ext[1]);
>
> /* The existence of a CTA extension should imply RGB support */
> info->color_formats = DRM_COLOR_FORMAT_RGB444;
> @@ -6243,9 +6254,10 @@ static void drm_get_monitor_range(struct drm_connector
> *connector,
>
> drm_for_each_detailed_block(drm_edid, get_monitor_range, &closure);
>
> - DRM_DEBUG_KMS("Supported Monitor Refresh rate range is %d Hz - %d Hz\n",
> - info->monitor_range.min_vfreq,
> - info->monitor_range.max_vfreq);
> + drm_dbg_kms(connector->dev,
> + "[CONNECTOR:%d:%s] Supported Monitor Refresh rate range is
> %d Hz - %d Hz\n",
> + connector->base.id, connector->name,
> + info->monitor_range.min_vfreq,
> info->monitor_range.max_vfreq);
> }
>
> static void drm_parse_vesa_mso_data(struct drm_connector *connector,
> @@ -6387,8 +6399,9 @@ static u32 update_display_info(struct drm_connector
> *connector,
> if (info->bpc == 0 && edid->revision == 3 &&
> edid->input & DRM_EDID_DIGITAL_DFP_1_X) {
> info->bpc = 8;
> - DRM_DEBUG("%s: Assigning DFP sink color depth as %d bpc.\n",
> - connector->name, info->bpc);
> + drm_dbg_kms(connector->dev,
> + "[CONNECTOR:%d:%s] Assigning DFP sink color depth
> as %d bpc.\n",
> + connector->base.id, connector->name, info->bpc);
> }
>
> /* Only defined for 1.4 with digital displays */
> @@ -6420,8 +6433,9 @@ static u32 update_display_info(struct drm_connector
> *connector,
> break;
> }
>
> - DRM_DEBUG("%s: Assigning EDID-1.4 digital sink color depth as %d
> bpc.\n",
> - connector->name, info->bpc);
> + drm_dbg_kms(connector->dev,
> + "[CONNECTOR:%d:%s] Assigning EDID-1.4 digital sink color
> depth as %d bpc.\n",
> + connector->base.id, connector->name, info->bpc);
>
> if (edid->features & DRM_EDID_FEATURE_RGB_YCRCB444)
> info->color_formats |= DRM_COLOR_FORMAT_YCBCR444;
> @@ -7121,11 +7135,14 @@ static void drm_parse_tiled_block(struct
> drm_connector *connector,
> connector->tile_h_size = w + 1;
> connector->tile_v_size = h + 1;
>
> - DRM_DEBUG_KMS("tile cap 0x%x\n", tile->tile_cap);
> - DRM_DEBUG_KMS("tile_size %d x %d\n", w + 1, h + 1);
> - DRM_DEBUG_KMS("topo num tiles %dx%d, location %dx%d\n",
> - num_h_tile + 1, num_v_tile + 1, tile_h_loc, tile_v_loc);
> - DRM_DEBUG_KMS("vend %c%c%c\n", tile->topology_id[0],
> tile->topology_id[1], tile->topology_id[2]);
> + drm_dbg_kms(connector->dev,
> + "[CONNECTOR:%d:%s] tile cap 0x%x, size %dx%d, num tiles
> %dx%d, location %dx%d, vend %c%c%c",
> + connector->base.id, connector->name,
> + tile->tile_cap,
> + connector->tile_h_size, connector->tile_v_size,
> + connector->num_h_tile, connector->num_v_tile,
> + connector->tile_h_loc, connector->tile_v_loc,
> + tile->topology_id[0], tile->topology_id[1],
> tile->topology_id[2]);
>
> tg = drm_mode_get_tile_group(connector->dev, tile->topology_id);
> if (!tg)
> --
> 2.34.1
--
Ville Syrjälä
Intel
