The ST7701(S) is capable of DSI burst mode, which is more energy
efficient than the non-burst modes. Make use of it.
The ST7701(S) is capable of DSI non-continuous clock, since it
sources the TFT matrix driver clock from internal clock source.
The DSI non-continuous clock further reduce power utilization.
The ST7701(S) uses DSI LPM for command transmissions, make sure
this is configured correctly in the DSI mode flags.
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Guido Günther <a...@sigxcpu.org>
Cc: Jagan Teki <ja...@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Cc: Linus Walleij <linus.wall...@linaro.org>
Cc: Sam Ravnborg <s...@ravnborg.org>
Cc: Thierry Reding <thierry.red...@gmail.com>
---
drivers/gpu/drm/panel/panel-sitronix-st7701.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7701.c
b/drivers/gpu/drm/panel/panel-sitronix-st7701.c
index 90b0e90eb6e2..fe9f1d2fcf44 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7701.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7701.c
@@ -334,7 +334,8 @@ static int st7701_dsi_probe(struct mipi_dsi_device *dsi)
return -ENOMEM;
desc = of_device_get_match_data(&dsi->dev);
- dsi->mode_flags = MIPI_DSI_MODE_VIDEO;
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_MODE_LPM | MIPI_DSI_CLOCK_NON_CONTINUOUS;
dsi->format = desc->format;
dsi->lanes = desc->lanes;
--
2.35.1
