Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Signed-off-by: Stephen Kitt <st...@sk2.org>
Cc: Paul Mackerras <pau...@samba.org>
Cc: Helge Deller <del...@gmx.de>
Cc: linux-fb...@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
---
drivers/video/fbdev/aty/aty128fb.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/video/fbdev/aty/aty128fb.c
b/drivers/video/fbdev/aty/aty128fb.c
index b26c81233b6b..a8f9baac3d3f 100644
--- a/drivers/video/fbdev/aty/aty128fb.c
+++ b/drivers/video/fbdev/aty/aty128fb.c
@@ -1765,12 +1765,10 @@ static int aty128_bl_update_status(struct
backlight_device *bd)
unsigned int reg = aty_ld_le32(LVDS_GEN_CNTL);
int level;
- if (bd->props.power != FB_BLANK_UNBLANK ||
- bd->props.fb_blank != FB_BLANK_UNBLANK ||
- !par->lcd_on)
+ if (!par->lcd_on)
level = 0;
else
- level = bd->props.brightness;
+ level = backlight_get_brightness(bd);
reg |= LVDS_BL_MOD_EN | LVDS_BLON;
if (level > 0) {
--
2.30.2
