On Thu, Apr 21, 2022 at 12:22:03PM -0700, José Roberto de Souza wrote:
> Intel hardware supports change between modes with different refresh
> rates without any glitches or visual artifacts, that feature is called
> seamless DRRS.
>
> So far i915 driver was automatically changing between preferred panel
> mode and lower refresh rate mode based on idleness but ChromeOS
> compositor team is requesting to be in control of the mode switch.
> So for a certain types of content it can switch to mode with a lower
> refresh rate without user noticing a thing and saving power.
>
> This seamless mode switch will be triggered when user-space dispatch
> a atomic commit with the new mode and clears the
> DRM_MODE_ATOMIC_ALLOW_MODESET flag.
>
> A driver that don't implement atomic_seamless_mode_switch_check
> function will continue to fail in the atomic check phase with
> "[CRTC:%d:%s] requires full modeset" debug message.
> While a driver that implements it and support the seamless change
> between old and new mode will return 0 otherwise it should return the
> appropried errno.
>
> So here adding basic drm infrastructure to that be supported by i915
> and other drivers.
I don't see the need for any extra infrastructure for this.
I think we just need:
- fix the fastset code to not suck
- reprogram M/N during fastset
- calculate eDP link params using panel's highest refresh rate mode
to make sure we get the same link params for all refresh rates
>
> Cc: Vidya Srinivas <vidya.srini...@intel.com>
> Cc: Sean Paul <seanp...@chromium.org>
> Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
> Signed-off-by: José Roberto de Souza <jose.so...@intel.com>
> ---
> drivers/gpu/drm/drm_atomic.c | 1 +
> drivers/gpu/drm/drm_atomic_helper.c | 16 +++++++++++++++
> drivers/gpu/drm/drm_atomic_state_helper.c | 1 +
> include/drm/drm_crtc.h | 25 +++++++++++++++++++++++
> 4 files changed, 43 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
> index 58c0283fb6b0c..21525f9f4b4c1 100644
> --- a/drivers/gpu/drm/drm_atomic.c
> +++ b/drivers/gpu/drm/drm_atomic.c
> @@ -437,6 +437,7 @@ static void drm_atomic_crtc_print_state(struct
> drm_printer *p,
> drm_printf(p, "\tself_refresh_active=%d\n", state->self_refresh_active);
> drm_printf(p, "\tplanes_changed=%d\n", state->planes_changed);
> drm_printf(p, "\tmode_changed=%d\n", state->mode_changed);
> + drm_printf(p, "\tseamless_mode_changed=%d\n",
> state->seamless_mode_changed);
> drm_printf(p, "\tactive_changed=%d\n", state->active_changed);
> drm_printf(p, "\tconnectors_changed=%d\n", state->connectors_changed);
> drm_printf(p, "\tcolor_mgmt_changed=%d\n", state->color_mgmt_changed);
> diff --git a/drivers/gpu/drm/drm_atomic_helper.c
> b/drivers/gpu/drm/drm_atomic_helper.c
> index 9603193d2fa13..e6f3a966f7b86 100644
> --- a/drivers/gpu/drm/drm_atomic_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_helper.c
> @@ -631,6 +631,22 @@ drm_atomic_helper_check_modeset(struct drm_device *dev,
> drm_dbg_atomic(dev, "[CRTC:%d:%s] mode changed\n",
> crtc->base.id, crtc->name);
> new_crtc_state->mode_changed = true;
> +
> + if (!state->allow_modeset &&
> + crtc->funcs->atomic_seamless_mode_switch_check) {
> + ret =
> crtc->funcs->atomic_seamless_mode_switch_check(state, crtc);
> + if (ret == -EOPNOTSUPP) {
> + drm_dbg_atomic(dev, "[CRTC:%d:%s]
> Seamless mode switch not supported\n",
> + crtc->base.id,
> crtc->name);
> + return ret;
> + }
> +
> + if (ret < 0)
> + return ret;
> +
> + new_crtc_state->seamless_mode_changed = true;
> + new_crtc_state->mode_changed = false;
> + }
> }
>
> if (old_crtc_state->enable != new_crtc_state->enable) {
> diff --git a/drivers/gpu/drm/drm_atomic_state_helper.c
> b/drivers/gpu/drm/drm_atomic_state_helper.c
> index 3b6d3bdbd0996..c093073ea6e11 100644
> --- a/drivers/gpu/drm/drm_atomic_state_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_state_helper.c
> @@ -142,6 +142,7 @@ void __drm_atomic_helper_crtc_duplicate_state(struct
> drm_crtc *crtc,
> if (state->gamma_lut)
> drm_property_blob_get(state->gamma_lut);
> state->mode_changed = false;
> + state->seamless_mode_changed = false;
> state->active_changed = false;
> state->planes_changed = false;
> state->connectors_changed = false;
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index a70baea0636ca..b7ce378d679d3 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -140,6 +140,16 @@ struct drm_crtc_state {
> */
> bool mode_changed : 1;
>
> + /**
> + * @seamless_mode_changed: @mode has been changed but user-space
> + * is requesting to change to the new mode with a fastset and driver
> + * supports this request.
> + * To be used by drivers to steer the atomic commit control flow to
> + * appropriate paths to change mode without any visual corruption.
> + * Never set together with @mode_changed.
> + */
> + bool seamless_mode_changed : 1;
> +
> /**
> * @active_changed: @active has been toggled. Used by the atomic
> * helpers and drivers to steer the atomic commit control flow. See also
> @@ -939,6 +949,21 @@ struct drm_crtc_funcs {
> int *max_error,
> ktime_t *vblank_time,
> bool in_vblank_irq);
> +
> + /**
> + * @atomic_seamless_mode_switch_check
> + *
> + * Called when user-space wants to change mode without do a modeset.
> + * Drivers can optionally support do a mode switch without any visual
> + * corruption when changing between certain modes.
> + *
> + * Returns:
> + * Zero if possible to seamless switch mode, -EOPNOTSUPP if not
> + * supported seamless mode change or appropriate errno if an error
> + * happened.
> + */
> + int (*atomic_seamless_mode_switch_check)(struct drm_atomic_state *state,
> + struct drm_crtc *crtc);
> };
>
> /**
> --
> 2.36.0
--
Ville Syrjälä
Intel
