On Tue, Mar 08, 2022 at 02:06:43PM +0100, Christophe Branchereau wrote:
> Add binding for the leadtek ltk035c5444t, which is a 640x480
> mipi-dbi over spi / 24-bit RGB panel based on the newvision
> NV03052C chipset.
>
> It is found in the Anbernic RG350M mips handheld.
>
> Signed-off-by: Christophe Branchereau <[email protected]>
> ---
> .../panel/leadtek,ltk035c5444t-spi.yaml | 59 +++++++++++++++++++
> 1 file changed, 59 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t-spi.yaml
We have 18 SPI based panels already:
$ git grep -i 'spi.* {' Documentation/devicetree/bindings/display/panel/
Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml: spi {
Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml: spi {
Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml: spi {
Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml: spi {
Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml: spi {
Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml:
spi {
Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml: spi {
Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml: spi
{
Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml: spi0 {
Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml: spi {
Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml: spi
{
Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml: spi
{
Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml: spi {
Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml: spi {
Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml: spi {
Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml: spi {
Documentation/devicetree/bindings/display/panel/tpo,td.yaml: spi {
Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml: spi {
Most except for the Samsung ones look like they'd fit in our definition
of 'simple panels' which primarily means 1 supply.
So I think it is time for a panel-simple-spi.yaml binding to combine all
these. But I'm not going to make the person adding the 19th case to do
that, and this otherwise looks fine:
Reviewed-by: Rob Herring <[email protected]>
With one nit fixed below:
>
> diff --git
> a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t-spi.yaml
>
> b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t-spi.yaml
> new file mode 100644
> index 000000000000..9b6f1810adab
> --- /dev/null
> +++
> b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t-spi.yaml
> @@ -0,0 +1,59 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id:
> http://devicetree.org/schemas/display/panel/leadtek,ltk035c5444t-spi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Leadtek ltk035c5444t 3.5" (640x480 pixels) 24-bit IPS LCD panel
> +
> +maintainers:
> + - Paul Cercueil <[email protected]>
> + - Christophe Branchereau <[email protected]>
> +
> +allOf:
> + - $ref: panel-common.yaml#
> + - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +properties:
> + compatible:
> + const: leadtek,ltk035c5444t-spi
'-spi' is redundant, so drop.
> +
> + backlight: true
> + port: true
> + power-supply: true
> + reg: true
> + reset-gpios: true
> +
> +required:
> + - compatible
> + - power-supply
> + - reset-gpios
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + panel@0 {
> + compatible = "leadtek,ltk035c5444t-spi";
And update the example...
> + reg = <0>;
> +
> + spi-3wire;
> + spi-max-frequency = <3125000>;
> +
> + reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
> +
> + backlight = <&backlight>;
> + power-supply = <&vcc>;
> +
> + port {
> + panel_input: endpoint {
> + remote-endpoint = <&panel_output>;
> + };
> + };
> + };
> + };
> --
> 2.34.1
>
>
