On Thu, Feb 17, 2022 at 01:25:21AM +0100, Marek Vasut wrote:
> The driver currently hard-codes HS/VS polarity to active-low and DE to
> active-high, which is not correct for a lot of supported DPI panels.
> Add the missing mode flag handling for HS/VS/DE polarity.
>
> Signed-off-by: Marek Vasut <ma...@denx.de>
> Cc: Jagan Teki <ja...@amarulasolutions.com>
> Cc: Maxime Ripard <max...@cerno.tech>
> Cc: Robert Foss <robert.f...@linaro.org>
> Cc: Sam Ravnborg <s...@ravnborg.org>
> Cc: Thomas Zimmermann <tzimmerm...@suse.de>
> To: dri-devel@lists.freedesktop.org
> ---
> V2: Rebase on next-20220214
> ---
> drivers/gpu/drm/bridge/chipone-icn6211.c | 16 +++++++++++++++-
> 1 file changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/bridge/chipone-icn6211.c
> b/drivers/gpu/drm/bridge/chipone-icn6211.c
> index e29e6a84c39a6..2ac8eb7e25f52 100644
> --- a/drivers/gpu/drm/bridge/chipone-icn6211.c
> +++ b/drivers/gpu/drm/bridge/chipone-icn6211.c
> @@ -165,8 +165,16 @@ static void chipone_atomic_enable(struct drm_bridge
> *bridge,
> struct drm_bridge_state *old_bridge_state)
> {
> struct chipone *icn = bridge_to_chipone(bridge);
> + struct drm_atomic_state *state = old_bridge_state->base.state;
> struct drm_display_mode *mode = &icn->mode;
> + const struct drm_bridge_state *bridge_state;
> u16 hfp, hbp, hsync;
> + u32 bus_flags;
> + u8 pol;
> +
> + /* Get the DPI flags from the bridge state. */
> + bridge_state = drm_atomic_get_new_bridge_state(state, bridge);
> + bus_flags = bridge_state->output_bus_cfg.flags;
>
> ICN6211_DSI(icn, MIPI_CFG_PW, MIPI_CFG_PW_CONFIG_DSI);
>
> @@ -206,7 +214,13 @@ static void chipone_atomic_enable(struct drm_bridge
> *bridge,
> ICN6211_DSI(icn, HFP_MIN, hfp & 0xff);
> ICN6211_DSI(icn, MIPI_PD_CK_LANE, 0xa0);
> ICN6211_DSI(icn, PLL_CTRL(12), 0xff);
> - ICN6211_DSI(icn, BIST_POL, BIST_POL_DE_POL);
> +
> + /* DPI HS/VS/DE polarity */
> + pol = ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? BIST_POL_HSYNC_POL : 0) |
> + ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? BIST_POL_VSYNC_POL : 0) |
> + ((bus_flags & DRM_BUS_FLAG_DE_HIGH) ? BIST_POL_DE_POL : 0);Is there a reason you didn't use bus_flags for all the polarities there? Maxime
signature.asc
Description: PGP signature
