Il 23/10/21 13:14, Flora Fu ha scritto:
Add driver for control APU tinysys
APU integrated subsystem having MD32RV33 (MD32) that runs tinysys
The tinsys is running on a micro processor in APU.
Its firmware is load and boot from Kernel side. Kernel and tinysys use
IPI to tx/rx messages.
Signed-off-by: Flora Fu <flora...@mediatek.com>
---
drivers/soc/mediatek/apusys/Makefile | 6 +
drivers/soc/mediatek/apusys/apu-config.h | 100 +++
drivers/soc/mediatek/apusys/apu-core.c | 2 +
drivers/soc/mediatek/apusys/apu-core.h | 2 +
drivers/soc/mediatek/apusys/apu-ipi.c | 486 ++++++++++++
I'm not sure of that, but your apu-ipi.c may be more suited to be in
drivers/remoteproc instead.
drivers/soc/mediatek/apusys/apu-mbox.c | 83 ++
apu-mbox.c should go to drivers/mailbox/ and you should register it with
the mailbox API as a mailbox controller instead of what you're currently
doing...
From what I see, you have functions in there that can be indeed mapped
to struct mbox_chan_ops .send_data and .peek_data... also your function
apu_mbox_wait_inbox seems to be waiting on an interrupt, and such irq is
apparently your "mbox0_irq" (as you named it in the dt).
In that case, you can also manage that in your drivers/mailbox/ driver.
+
drivers/soc/mediatek/apusys/apu-mbox.h | 27 +
drivers/soc/mediatek/apusys/apu-rproc.c | 806 ++++++++++++++++++++
The apu-rproc.c driver seems to be a good candidate to be moved away from
drivers/soc/mediatek/apusys/ - as this is indeed a remoteproc driver.
Having it as drivers/remoteproc/mtk_apu.c seems to be a good option.
drivers/soc/mediatek/apusys/apu-sw-logger.c | 429 +++++++++++
This one definitely belongs here in drivers/soc/mediatek, and it's a consumer
of the mailbox driver.
drivers/soc/mediatek/apusys/apu.h | 256 +++++++
drivers/soc/mediatek/apusys/mt81xx-plat.c | 320 ++++++++
If we end up keeping to be in need to have a separate mt81xx-plat.c file,
then I believe this should have another name, so that it becomes one that
aggregates all of the very-platform-specific functions in one, instead of
having one file for each platform.
Though, it may also be possible that this file will disappear entirely:
since most of the things here will be moved around, it may become mostly
empty... but it's probably too soon to judge.
11 files changed, 2517 insertions(+)
create mode 100644 drivers/soc/mediatek/apusys/apu-config.h
create mode 100644 drivers/soc/mediatek/apusys/apu-ipi.c
create mode 100644 drivers/soc/mediatek/apusys/apu-mbox.c
create mode 100644 drivers/soc/mediatek/apusys/apu-mbox.h
create mode 100644 drivers/soc/mediatek/apusys/apu-rproc.c
create mode 100644 drivers/soc/mediatek/apusys/apu-sw-logger.c
create mode 100644 drivers/soc/mediatek/apusys/apu.h
create mode 100644 drivers/soc/mediatek/apusys/mt81xx-plat.c
snip...
diff --git a/drivers/soc/mediatek/apusys/apu-ipi.c
b/drivers/soc/mediatek/apusys/apu-ipi.c
new file mode 100644
index 000000000000..547e034b3620
--- /dev/null
+++ b/drivers/soc/mediatek/apusys/apu-ipi.c
snip...
+int apu_ipi_init(struct platform_device *pdev, struct mtk_apu *apu)
+{
+ struct device *dev = apu->dev;
+ int i, ret;
+
+ tx_serial_no = 0;
+ rx_serial_no = 0;
+
+ mutex_init(&apu->send_lock);
+ spin_lock_init(&apu->usage_cnt_lock);
+ for (i = 0; i < APU_IPI_MAX; i++) {
+ mutex_init(&apu->ipi_desc[i].lock);
+ lockdep_set_class_and_name(&apu->ipi_desc[i].lock,
+ &ipi_lock_key[i],
+ apu->platdata->ipi_attrs[i].name);
+ }
+
+ init_waitqueue_head(&apu->run.wq);
+ init_waitqueue_head(&apu->ack_wq);
+
+ /* APU initialization IPI register */
+ ret = apu_ipi_register(apu, APU_IPI_INIT, apu_init_ipi_handler, apu);
+ if (ret) {
+ dev_err(dev, "failed to register ipi for init, ret=%d\n",
+ ret);
+ return ret;
+ }
+
+ /* add rpmsg subdev */
+ apu_add_rpmsg_subdev(apu);
+
+ /* register mailbox IRQ */
+ apu->mbox0_irq_number = platform_get_irq_byname(pdev, "mbox0_irq");
+ dev_info(&pdev->dev, "%s: mbox0_irq = %d\n", __func__,
+ apu->mbox0_irq_number);
+
+ ret = devm_request_threaded_irq(&pdev->dev, apu->mbox0_irq_number,
+ NULL, apu_ipi_handler, IRQF_ONESHOT,
+ "apu_ipi", apu);
This is the mailbox interrupt... but it's handled in this driver instead of
being handler in the mailbox driver... it's a bit confusing.
Is this interrupt supposed to fire as a mailbox doorbell or..?
In that case, you should request it in the mailbox driver and register an
interrupt controller (still, in the mailbox driver) so that you can export
a sw interrupt to this one.
Or, maybe you can use notifiers to catch the mailbox message in this driver?
+ if (ret < 0)
+ goto remove_rpmsg_subdev;
+
+ apu_mbox_hw_init(apu);
+
+ return 0;
+
+remove_rpmsg_subdev:
+ apu_remove_rpmsg_subdev(apu);
+ apu_ipi_unregister(apu, APU_IPI_INIT);
+
+ return ret;
+}
snip...
diff --git a/drivers/soc/mediatek/apusys/apu-rproc.c
b/drivers/soc/mediatek/apusys/apu-rproc.c
new file mode 100644
index 000000000000..e2fe63dd6cc1
--- /dev/null
+++ b/drivers/soc/mediatek/apusys/apu-rproc.c
@@ -0,0 +1,806 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/iommu.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/remoteproc.h>
+#include <linux/time64.h>
+#include <linux/of_platform.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+#include <linux/sched/clock.h>
+#include <linux/time64.h>
+#include <linux/workqueue.h>
+
+#include "apu.h"
+#include "apu-config.h"
+#include "apu-core.h"
+
+/* cmd */
+enum {
+ DPIDLE_CMD_LOCK_IPI = 0x5a00,
+ DPIDLE_CMD_UNLOCK_IPI = 0x5a01,
+ DPIDLE_CMD_PDN_UNLOCK = 0x5a02,
+};
+
+/* ack */
+enum {
+ DPIDLE_ACK_OK = 0,
+ DPIDLE_ACK_LOCK_BUSY,
+ DPIDLE_ACK_POWER_DOWN_FAIL,
+};
+
+static struct work_struct *apu_pwr_work;
+static struct workqueue_struct *apu_pwr_wq;
+static struct dentry *dbg_root;
+
+static void *apu_da_to_va(struct rproc *rproc, u64 da, size_t len,
+ bool *is_iomem)
+{
+ void *ptr = NULL;
+ struct mtk_apu *apu = (struct mtk_apu *)rproc->priv;
+
+ if (da >= DRAM_OFFSET && da < DRAM_OFFSET + CODE_BUF_SIZE) {
+ ptr = apu->code_buf + (da - DRAM_OFFSET);
+ } else {
+ dev_err(apu->dev, "%s: invalid da: da = 0x%llx, len = %zu\n",
+ __func__, da, len);
+ }
+ return ptr;
+}
+
+static int apu_run(struct rproc *rproc)
+{
+ struct mtk_apu *apu = (struct mtk_apu *)rproc->priv;
+ struct mtk_apu_hw_ops *hw_ops = &apu->platdata->ops;
+ struct device *dev = apu->dev;
+ struct apu_run *run = &apu->run;
+ struct timespec64 begin, end, delta;
+ int ret;
+
+ pm_runtime_get_sync(apu->dev);
+ hw_ops->start(apu);
Don't forget to always check return values.....
+
+ /* check if boot success */
+ ktime_get_ts64(&begin);
+ ret = wait_event_interruptible_timeout(run->wq,
+ run->signaled,
+ msecs_to_jiffies(10000));
#define APU_INIT_TIMEOUT_MS 10000
...but then, does it really need 10 *seconds* for that?! That's a lot of time...
+ ktime_get_ts64(&end);
+ if (ret == 0) {
+ dev_info(dev, "APU initialization timeout!!\n");
+ ret = -ETIME;
+ goto stop;
+ }
+ if (ret == -ERESTARTSYS) {
+ dev_info(dev, "wait APU interrupted by a signal!!\n");
+ goto stop;
+ }
+
+ apu->boot_done = true;
+ delta = timespec64_sub(end, begin);
+ dev_info(dev, "APU uP boot success. boot time: %llu s, %llu ns\n",
+ (u64)delta.tv_sec, (u64)delta.tv_nsec);
+
+ return 0;
+
+stop:
+ hw_ops->stop(apu);
+
+ return ret;
+}
+
snip...
+
+static int apu_config_setup(struct mtk_apu *apu)
+{
+ struct device *dev = apu->dev;
+ unsigned long flags;
+ int ret;
+
+ apu->conf_buf = dma_alloc_coherent(apu->dev, CONFIG_SIZE,
+ &apu->conf_da, GFP_KERNEL);
+
+ if (!apu->conf_buf || apu->conf_da == 0) {
+ dev_info(dev, "%s: dma_alloc_coherent fail\n", __func__);
+ return -ENOMEM;
+ }
+ memset(apu->conf_buf, 0, CONFIG_SIZE);
+
+ apu_config_user_ptr_init(apu);
+ spin_lock_irqsave(&apu->reg_lock, flags);
+ iowrite32((u32)apu->conf_da, apu->apu_mbox + HOST_CONFIG_ADDR);
+ spin_unlock_irqrestore(&apu->reg_lock, flags);
+
+ apu->conf_buf->time_offset = sched_clock();
+ ret = apu_ipi_config_init(apu);
+ if (ret) {
+ dev_info(dev, "apu ipi config init failed\n");
+ goto out;
+ }
+
+ ret = sw_logger_config_init(apu);
From what I understand, the sw logger is not critical for functionality... so
it should probably be a "pluggable" instead.
Also, since that sw logger seems to be "simply" reading from a mailbox, it
should be pretty straightforward to make it so, in which case, you wouldn't
be initializing it here, but as a platform driver instead (if debugging
enabled?)
+ if (ret) {
+ dev_err(dev, "sw logger config init failed\n");
+ goto err_sw_logger;
+ }
+
+ return 0;
+
+err_sw_logger:
+ apu_ipi_config_remove(apu);
+out:
+ return ret;
+}
+
snip...
diff --git a/drivers/soc/mediatek/apusys/apu.h
b/drivers/soc/mediatek/apusys/apu.h
new file mode 100644
index 000000000000..5bbc46416a19
--- /dev/null
+++ b/drivers/soc/mediatek/apusys/apu.h
@@ -0,0 +1,256 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ */
+
+#ifndef APU_H
+#define APU_H
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/rpmsg/mtk_rpmsg.h>
+
+#include "apu-config.h"
+
+/* setup the SMC command ops */
+#define MTK_SIP_APU_START_MCU 0x00
+#define MTK_SIP_APU_STOP_MCU 0x01
+
+/* md32_sysctrl register definition */
+#define MD32_SYS_CTRL 0x0
+#define MD32_MON_PC 0x838
+#define MD32_MON_LR 0x83c
+#define MD32_MON_SP 0x840
+#define MD32_STATUS 0x844
+
+/*wdt register */
+#define WDT_INT 0x0
+#define WDT_CTRL0 0x4
+#define WDT_EN BIT(31)
+
+/* apu_mbox spare regiter */
/* apu_mbox spare register: mbox 0..6, spare 0..3 */
#define REG_MBOX_SPARE(mbox, reg) ((0x40 + (0x100 * mbox)) + (reg * 0x4))
#define REG_MBOX0_SPARE(n) REG_MBOX_SPARE(0, n)
#define REG_MBOX6_SPARE(n) REG_MBOX_SPARE(6, n)
#define HOST_CONFIG_ADDR REG_MBOX_SPARE(0, 2)
Would that be better? Granted, mbox1-5 are also accessible and perhaps used
in the future.
+#define MBOX0_SPARE0 0x40
+#define MBOX0_SPARE1 0x44
+#define MBOX0_SPARE2 0x48
+#define MBOX0_SPARE3 0x4C
+#define MBOX6_SPARE0 0x640
+#define MBOX6_SPARE1 0x644
+#define MBOX6_SPARE2 0x648
+#define MBOX6_SPARE3 0x64C
+
+#define HOST_CONFIG_ADDR MBOX0_SPARE2
+
+#define LOG_W_PTR (MBOX0_SPARE0)
+#define LOG_R_PTR (MBOX0_SPARE1)
+#define LOG_OV_FLG (MBOX0_SPARE3)
+
+/* rv setup */
+#define F_PRELOAD_FIRMWARE BIT(0)
+#define F_AUTO_BOOT BIT(1)
+
Use SZ_* macros where possible
+#define TCM_SIZE (128UL * 1024UL)
+#define CODE_BUF_SIZE (1024UL * 1024UL)
+#define DRAM_DUMP_SIZE (CODE_BUF_SIZE - TCM_SIZE)
+#define REG_SIZE (4UL * 151UL)
+#define TBUF_SIZE (4UL * 32UL)
+#define CACHE_DUMP_SIZE (37UL * 1024UL)
+#define DRAM_OFFSET (0x00000UL)
+#define DRAM_DUMP_OFFSET (TCM_SIZE)
+#define TCM_OFFSET (0x1d700000UL)
+#define CODE_BUF_DA (DRAM_OFFSET)
+
+/* ipi */
+#define APU_FW_VER_LEN 32
+#define APU_SHARE_BUFFER_SIZE 256
+
+#define IPI_LOCKED 1
+#define IPI_UNLOCKED 0
+
+#define IPI_HOST_INITIATE 0
+#define IPI_APU_INITIATE 1
+#define IPI_WITH_ACK 1
+#define IPI_WITHOUT_ACK 0
+
+enum {
+ APU_IPI_INIT = 0,
+ APU_IPI_NS_SERVICE,
+ APU_IPI_DEEP_IDLE,
+ APU_IPI_CTRL_RPMSG,
+ APU_IPI_MIDDLEWARE,
+ APU_IPI_REVISER_RPMSG,
+ APU_IPI_PWR_TX,
+ APU_IPI_PWR_RX,
+ APU_IPI_MDLA_TX,
+ APU_IPI_MDLA_RX,
+ APU_IPI_TIMESYNC,
+ APU_IPI_EDMA_TX,
+ APU_IPI_MNOC_TX,
+ APU_IPI_MAX,
+};
+
+struct mtk_apu;
+
+struct mtk_apu_hw_ops {
+ int (*init)(struct mtk_apu *apu);
+ int (*exit)(struct mtk_apu *apu);
+ int (*start)(struct mtk_apu *apu);
+ int (*stop)(struct mtk_apu *apu);
+ int (*resume)(struct mtk_apu *apu);
+ int (*apu_memmap_init)(struct mtk_apu *apu);
+ void (*apu_memmap_remove)(struct mtk_apu *apu);
+ void (*cg_gating)(struct mtk_apu *apu);
+ void (*cg_ungating)(struct mtk_apu *apu);
+ void (*rv_cachedump)(struct mtk_apu *apu);
+
+ /* power related ops */
+ int (*power_init)(struct mtk_apu *apu);
+ int (*power_on)(struct mtk_apu *apu);
+ int (*power_off)(struct mtk_apu *apu);
+};
+
+struct apu_ipi {
+ char *name;
+ unsigned int direction:1;
+ unsigned int ack:1;
+};
+
+struct mtk_apu_platdata {
+ u32 flags;
+ struct mtk_apu_hw_ops ops;
+ const struct apu_ipi *ipi_attrs;
+};
+
+struct dpidle_msg {
+ u32 cmd;
+ u32 ack;
+};
+
+struct apu_run {
+ s8 fw_ver[APU_FW_VER_LEN];
+ u32 signaled;
+ wait_queue_head_t wq;
+};
+
+struct apu_ipi_desc {
+ struct mutex lock; /*ipi hanlder mutex */
typo
+ ipi_handler_t handler;
+ void *priv;
+ /*
+ * positive: host-initiated ipi outstanding count
+ * negative: apu-initiated ipi outstanding count
+ */
+ int usage_cnt;
+};
+
+struct mtk_share_obj {
+ u8 share_buf[APU_SHARE_BUFFER_SIZE];
+};
+
+struct sw_logger_seq_data {
+ u32 w_ptr;
+ u32 r_ptr;
+ u32 overflow_flg;
+ int i;
+ int is_finished;
+ char *data;
+ bool startl_first;
+};
+
+struct mtk_apu {
+ struct rproc *rproc;
+ struct device *dev;
+ void __iomem *apu_mbox;
+ void __iomem *md32_sysctrl;
+ void __iomem *apu_wdt;
+ int mbox0_irq_number;
+ int wdt_irq_number;
+ spinlock_t reg_lock; /* register r/w lock */
+
+ /* Buffer to place execution area */
+ void *code_buf;
+ dma_addr_t code_da;
+
+ /* Buffer to place config area */
+ struct config_v1 *conf_buf;
+ dma_addr_t conf_da;
+
+ /* to synchronize boot status of remote processor */
+ struct apu_run run;
+
+ /* to prevent multiple ipi_send run concurrently */
+ struct mutex send_lock;
+ spinlock_t usage_cnt_lock; /* ipi occipued lock */
+ struct apu_ipi_desc ipi_desc[APU_IPI_MAX];
+ bool ipi_id_ack[APU_IPI_MAX]; /* per-ipi ack */
+ bool ipi_inbound_locked;
+ wait_queue_head_t ack_wq; /* for waiting for ipi ack */
+
+ /* ipi */
+ struct rproc_subdev *rpmsg_subdev;
+ dma_addr_t recv_buf_da;
+ struct mtk_share_obj *recv_buf;
+ dma_addr_t send_buf_da;
+ struct mtk_share_obj *send_buf;
+
+ /* time sync */
+ struct work_struct timesync_work;
+ struct workqueue_struct *timesync_wq;
+ u64 timesync_stamp;
+
+ /*deep idle */
+ struct dpidle_msg recv_msg;
+ struct work_struct deepidle_work;
+ struct workqueue_struct *apu_deepidle_workq;
+ struct work_struct pwron_dbg_wk;
+
+ struct mtk_apu_platdata *platdata;
+
+ /* link power deive */
+ struct device *power_dev;
+ bool boot_done;
+ struct work_struct pwr_work;
+
+ /* logger and debug */
+ struct dentry *dbg_root;
+ dma_addr_t handle;
+ char *sw_log_buf;
+ spinlock_t sw_logger_spinlock; /* logger status update lock */
+ struct sw_logger_seq_data pseqdata_lock;
+ struct sw_logger_seq_data *pseqdata;
+};
+
+struct apu_coredump {
+ char tcmdump[TCM_SIZE];
+ char ramdump[DRAM_DUMP_SIZE];
+ char regdump[REG_SIZE];
+ char tbufdump[TBUF_SIZE];
+ u32 cachedump[CACHE_DUMP_SIZE / sizeof(u32)];
+} __packed;
+
+int apu_ipi_config_init(struct mtk_apu *apu);
+void apu_ipi_config_remove(struct mtk_apu *apu);
+void apu_ipi_remove(struct mtk_apu *apu);
+int apu_ipi_init(struct platform_device *pdev, struct mtk_apu *apu);
+int apu_ipi_register(struct mtk_apu *apu, u32 id,
+ ipi_handler_t handler, void *priv);
+void apu_ipi_unregister(struct mtk_apu *apu, u32 id);
+int apu_ipi_send(struct mtk_apu *apu, u32 id, void *data, u32 len,
+ u32 wait_ms);
+int apu_ipi_lock(struct mtk_apu *apu);
+void apu_ipi_unlock(struct mtk_apu *apu);
+
+void apu_deepidle_power_on_aputop(struct mtk_apu *apu);
+
+#if IS_ENABLED(CONFIG_DEBUG_FS)
+int sw_logger_config_init(struct mtk_apu *apu);
+void sw_logger_config_remove(struct mtk_apu *apu);
+int apu_sw_logger_init(struct mtk_apu *apu);
+void apu_sw_logger_remove(struct mtk_apu *apu);
+#else
+static inline int sw_logger_config_init(struct mtk_apu *apu) { return 0; }
+static inline void sw_logger_config_remove(struct mtk_apu *apu) { }
+static inline int apu_sw_logger_init(struct mtk_apu *apu) { return 0; }
+static inline void apu_sw_logger_remove(struct mtk_apu *apu) { }
+#endif
+
+extern const struct mtk_apu_platdata mt8192_platdata;
+#endif /* APU_H */
diff --git a/drivers/soc/mediatek/apusys/mt81xx-plat.c
b/drivers/soc/mediatek/apusys/mt81xx-plat.c
new file mode 100644
index 000000000000..54f75c8d07c3
--- /dev/null
+++ b/drivers/soc/mediatek/apusys/mt81xx-plat.c
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+#include <linux/sched/clock.h>
+#include <linux/soc/mediatek/mtk_sip_svc.h>
+
+#include "apu.h"
+
+static const struct apu_ipi mt81xx_ipi_attrs[APU_IPI_MAX] = {
In here, this is used only to pass it to the remoteproc "ipi" driver: it would
make
sense if this was in the ipi driver, associated to a compatible like
mediatek,mt8192-ipi.
+ [APU_IPI_INIT] = {
+ .name = "init",
+ .direction = IPI_APU_INITIATE,
+ .ack = IPI_WITHOUT_ACK,
+ },
+ [APU_IPI_NS_SERVICE] = {
+ .name = "name-service",
+ .direction = IPI_APU_INITIATE,
+ .ack = IPI_WITHOUT_ACK,
+ },
+ [APU_IPI_DEEP_IDLE] = {
+ .name = "deep_idle",
+ .direction = IPI_APU_INITIATE,
+ .ack = IPI_WITH_ACK,
+ },
+ [APU_IPI_CTRL_RPMSG] = {
+ .name = "apu-ctrl-rpmsg",
+ .direction = IPI_APU_INITIATE,
+ .ack = IPI_WITH_ACK,
+ },
+ [APU_IPI_MIDDLEWARE] = {
+ .name = "apu-mdw-rpmsg",
+ .direction = IPI_HOST_INITIATE,
+ .ack = IPI_WITH_ACK,
+ },
+ [APU_IPI_REVISER_RPMSG] = {
+ .name = "apu-reviser-rpmsg",
+ .direction = IPI_HOST_INITIATE,
+ .ack = IPI_WITH_ACK,
+ },
+ [APU_IPI_PWR_TX] = {
+ .name = "apupwr-tx-rpmsg",
+ .direction = IPI_HOST_INITIATE,
+ .ack = IPI_WITH_ACK,
+ },
+ [APU_IPI_PWR_RX] = {
+ .name = "apupwr-rx-rpmsg",
+ .direction = IPI_APU_INITIATE,
+ .ack = IPI_WITH_ACK,
+ },
+ [APU_IPI_MDLA_TX] = {
+ .name = "mdla-tx-rpmsg",
+ .direction = IPI_HOST_INITIATE,
+ .ack = IPI_WITH_ACK,
+ },
+ [APU_IPI_MDLA_RX] = {
+ .name = "mdla-rx-rpmsg",
+ .direction = IPI_APU_INITIATE,
+ .ack = IPI_WITH_ACK,
+ },
+ [APU_IPI_TIMESYNC] = {
+ .name = "apu-timesync",
+ .direction = IPI_APU_INITIATE,
+ .ack = IPI_WITH_ACK,
+ },
+ [APU_IPI_EDMA_TX] = {
+ .name = "apu-edma-rpmsg",
+ .direction = IPI_HOST_INITIATE,
+ .ack = IPI_WITHOUT_ACK,
+ },
+ [APU_IPI_MNOC_TX] = {
+ .name = "apu-mnoc-rpmsg",
+ .direction = IPI_HOST_INITIATE,
+ .ack = IPI_WITHOUT_ACK,
+ },
+};
+
+static void apu_reset_mcu(struct mtk_apu *apu)
+{
+ u32 reg;
+
+ /* assert mcu reset */
+ reg = ioread32(apu->md32_sysctrl);
+ iowrite32(reg & ~0x1, apu->md32_sysctrl);
+ mdelay(10);
+ iowrite32(reg | 0x1, apu->md32_sysctrl);
+}
+
+static int apu_start_mcu(struct mtk_apu *apu)
+{
+ struct arm_smccc_res ares;
+
+ /* initialize IOMMU and ACP config (iommu_tr_en=1, acp_en=0) */
+ iowrite32(0xEA9, apu->md32_sysctrl);
+
+ arm_smccc_smc(MTK_SIP_APUSYS_CONTROL, MTK_SIP_APU_START_MCU,
+ 0, 0, 0, 0, 0, 0, &ares);
+ if (ares.a0)
+ dev_err(apu->dev, "start mcu fail: %lu\n", ares.a0);
+
+ return 0;
+}
+
+static int apu_stop_mcu(struct mtk_apu *apu)
+{
+ struct arm_smccc_res ares;
+
+ arm_smccc_smc(MTK_SIP_APUSYS_CONTROL, MTK_SIP_APU_STOP_MCU,
+ 0, 0, 0, 0, 0, 0, &ares);
+ if (ares.a0)
+ dev_err(apu->dev, "stop mcufail: %lu\n", ares.a0);
+
+ return 0;
+}
Is it expected for other SoCs to have different (or more) secure world calls?
If it is, then it may be worth it to move this to a different driver in
drivers/firmware, so that you will be able to map different/more values to
different compatibles.
Otherwise, keep it here.
+
Thanks,
- Angelo
