div_u64_rem provides the result of the division and additionally the
remainder; don't use this function to solely calculate the remainder
while calculating the division again with div_u64.
A similar improvement was applied earlier to the 10nm pll in
5c191fef4ce2 ("drm/msm/dsi_pll_10nm: Fix dividing the same numbers
twice").
Signed-off-by: Marijn Suijten <marijn.suij...@somainline.org>
---
Changes in v2:
- Corrected two typos in the first commit-message sentence.
drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 4 +---
drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 4 +---
2 files changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
index 9a959a5dcc1e..de3c6556a587 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
@@ -215,9 +215,7 @@ static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm
*pll, struct dsi_pll_conf
DBG("vco_clk_rate=%lld ref_clk_rate=%lld", vco_clk_rate, fref);
dec_start_multiple = div_u64(vco_clk_rate * multiplier, fref);
- div_u64_rem(dec_start_multiple, multiplier, &div_frac_start);
-
- dec_start = div_u64(dec_start_multiple, multiplier);
+ dec_start = div_u64_rem(dec_start_multiple, multiplier,
&div_frac_start);
pconf->dec_start = (u32)dec_start;
pconf->div_frac_start = div_frac_start;
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
index 9f7c408325ba..36eb6109cb88 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@@ -114,9 +114,7 @@ static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll,
struct dsi_pll_config
multiplier = 1 << FRAC_BITS;
dec_multiple = div_u64(pll_freq * multiplier, divider);
- div_u64_rem(dec_multiple, multiplier, &frac);
-
- dec = div_u64(dec_multiple, multiplier);
+ dec = div_u64_rem(dec_multiple, multiplier, &frac);
if (!(pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1))
config->pll_clock_inverters = 0x28;
--
2.33.0
