From: Sandor Yu <sandor...@nxp.com>
In function malidp_crtc_mode_valid, mode->crtc_mode = 0 when run
in drm_helper_probe_single_connector_modes.
Invalid video modes are not culled
and all modes move to the connector's modes list.
It is not expected by mode_valid.
Replace mode->crtc_clock with mode->clock to fix the issue.
Signed-off-by: Sandor Yu <sandor...@nxp.com>
---
drivers/gpu/drm/arm/malidp_crtc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/arm/malidp_crtc.c
b/drivers/gpu/drm/arm/malidp_crtc.c
index 494075ddbef6..55890334385d 100644
--- a/drivers/gpu/drm/arm/malidp_crtc.c
+++ b/drivers/gpu/drm/arm/malidp_crtc.c
@@ -31,7 +31,7 @@ static enum drm_mode_status malidp_crtc_mode_valid(struct
drm_crtc *crtc,
* check that the hardware can drive the required clock rate,
* but skip the check if the clock is meant to be disabled (req_rate =
0)
*/
- long rate, req_rate = mode->crtc_clock * 1000;
+ long rate, req_rate = mode->clock * 1000;
if (req_rate) {
rate = clk_round_rate(hwdev->pxlclk, req_rate);
--
2.17.1
