On 2021-07-21 19:42, Bjorn Andersson wrote:
Not all platforms has P0 at an offset of 0x1000 from the base address,
so add support for specifying each sub-region in DT. The code falls back
to the predefined offsets in the case that only a single reg is
specified, in order to support existing DT.

Signed-off-by: Bjorn Andersson <bjorn.anders...@linaro.org>
The change itself looks good, hence
Reviewed-by: Abhinav Kumar <abhin...@codeaurora.org>

But as a follow up to this change, can we move the existing DP DT on
sc7180 to this model and then drop this legacy path?

That will clean this up nicely.

---
 drivers/gpu/drm/msm/dp/dp_parser.c | 49 +++++++++++++++++++++++-------
 1 file changed, 38 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c
b/drivers/gpu/drm/msm/dp/dp_parser.c
index 1a10901ae574..fc8a6452f641 100644
--- a/drivers/gpu/drm/msm/dp/dp_parser.c
+++ b/drivers/gpu/drm/msm/dp/dp_parser.c
@@ -63,18 +63,45 @@ static int dp_parser_ctrl_res(struct dp_parser *parser)
                return PTR_ERR(dss->ahb);
        }

-       if (dss->ahb_len < DP_DEFAULT_P0_OFFSET + DP_DEFAULT_P0_SIZE) {
-               DRM_ERROR("legacy memory region not large enough\n");
-               return -EINVAL;
-       }
+       dss->aux = dp_ioremap(pdev, 1, &dss->aux_len);
+       if (IS_ERR(dss->aux)) {
+               /*
+                * The initial binding had a single reg, but in order to
+                * support variation in the sub-region sizes this was split.
+                * dp_ioremap() will fail with -ENODEV here if only a single
+                * reg is specified, so fill in the sub-region offsets and
+                * lengths based on this single region.
+                */
+               if (PTR_ERR(dss->aux) == -ENODEV) {
+                       if (dss->ahb_len < DP_DEFAULT_P0_OFFSET + 
DP_DEFAULT_P0_SIZE) {
+                               DRM_ERROR("legacy memory region not large 
enough\n");
+                               return -EINVAL;
+                       }
+
+                       dss->ahb_len = DP_DEFAULT_AHB_SIZE;
+                       dss->aux = dss->ahb + DP_DEFAULT_AUX_OFFSET;
+                       dss->aux_len = DP_DEFAULT_AUX_SIZE;
+                       dss->link = dss->ahb + DP_DEFAULT_LINK_OFFSET;
+                       dss->link_len = DP_DEFAULT_LINK_SIZE;
+                       dss->p0 = dss->ahb + DP_DEFAULT_P0_OFFSET;
+                       dss->p0_len = DP_DEFAULT_P0_SIZE;
+               } else {
+                       DRM_ERROR("unable to remap aux region: %pe\n", 
dss->aux);
+                       return PTR_ERR(dss->aux);
+               }
+       } else {
+               dss->link = dp_ioremap(pdev, 2, &dss->link_len);
+               if (IS_ERR(dss->link)) {
+                       DRM_ERROR("unable to remap link region: %pe\n", 
dss->link);
+                       return PTR_ERR(dss->link);
+               }

-       dss->ahb_len = DP_DEFAULT_AHB_SIZE;
-       dss->aux = dss->ahb + DP_DEFAULT_AUX_OFFSET;
-       dss->aux_len = DP_DEFAULT_AUX_SIZE;
-       dss->link = dss->ahb + DP_DEFAULT_LINK_OFFSET;
-       dss->link_len = DP_DEFAULT_LINK_SIZE;
-       dss->p0 = dss->ahb + DP_DEFAULT_P0_OFFSET;
-       dss->p0_len = DP_DEFAULT_P0_SIZE;
+               dss->p0 = dp_ioremap(pdev, 3, &dss->p0_len);
+               if (IS_ERR(dss->p0)) {
+                       DRM_ERROR("unable to remap p0 region: %pe\n", dss->p0);
+                       return PTR_ERR(dss->p0);
+               }
+       }

        io->phy = devm_phy_get(&pdev->dev, "dp");
        if (IS_ERR(io->phy))

Reply via email to