On Fri 16 Apr 17:39 CDT 2021, Douglas Anderson wrote:
> There's no devm_runtime_enable(), but it's easy to use
> devm_add_action_or_reset() and means we don't need to worry about the
> disable in our remove() routine or in error paths.
>
> No functional changes intended by this change.
>
Reviewed-by: Bjorn Andersson <bjorn.anders...@linaro.org>
Regards,
Bjorn
> Signed-off-by: Douglas Anderson <diand...@chromium.org>
> ---
>
> (no changes since v1)
>
> drivers/gpu/drm/bridge/ti-sn65dsi86.c | 14 +++++++++-----
> 1 file changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> index a200e88fd006..53f1f7b3022f 100644
> --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> @@ -1223,6 +1223,11 @@ static void ti_sn_bridge_parse_lanes(struct
> ti_sn65dsi86 *pdata,
> pdata->ln_polrs = ln_polrs;
> }
>
> +static void ti_sn65dsi86_runtime_disable(void *data)
> +{
> + pm_runtime_disable(data);
> +}
> +
> static int ti_sn65dsi86_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> @@ -1278,12 +1283,13 @@ static int ti_sn65dsi86_probe(struct i2c_client
> *client,
> return ret;
>
> pm_runtime_enable(dev);
> + ret = devm_add_action_or_reset(dev, ti_sn65dsi86_runtime_disable, dev);
> + if (ret)
> + return ret;
>
> ret = ti_sn_setup_gpio_controller(pdata);
> - if (ret) {
> - pm_runtime_disable(dev);
> + if (ret)
> return ret;
> - }
>
> pdata->aux.name = "ti-sn65dsi86-aux";
> pdata->aux.dev = dev;
> @@ -1316,8 +1322,6 @@ static int ti_sn65dsi86_remove(struct i2c_client
> *client)
>
> drm_bridge_remove(&pdata->bridge);
>
> - pm_runtime_disable(pdata->dev);
> -
> of_node_put(pdata->host_node);
>
> return 0;
> --
> 2.31.1.368.gbe11c130af-goog
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
