On 15/02/2021 19:27, Jonathan Marek wrote:
Add the required changes to support 7nm pll/phy in CPHY mode.
This adds a "qcom,dsi-phy-cphy-mode" property for the PHY node to enable
the CPHY mode.
Signed-off-by: Jonathan Marek <jonat...@marek.ca>
Other that few comments bellow:
Reviewed-by: Dmitry Baryshkov <dmitry.barysh...@linaro.org>
---
.../devicetree/bindings/display/msm/dsi.txt | 1 +
drivers/gpu/drm/msm/dsi/dsi.c | 12 +--
drivers/gpu/drm/msm/dsi/dsi.h | 6 +-
drivers/gpu/drm/msm/dsi/dsi.xml.h | 2 +
drivers/gpu/drm/msm/dsi/dsi_host.c | 34 +++++--
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 49 +++++++++-
drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 3 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 89 ++++++++++++++-----
drivers/gpu/drm/msm/dsi/pll/dsi_pll.c | 4 +-
drivers/gpu/drm/msm/dsi/pll/dsi_pll.h | 5 +-
drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c | 71 +++++++++------
11 files changed, 210 insertions(+), 66 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt
b/Documentation/devicetree/bindings/display/msm/dsi.txt
index b9a64d3ff184..7ffc86a9816b 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -124,6 +124,7 @@ Required properties:
Optional properties:
- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode
PHY
regulator is wanted.
+- qcom,dsi-phy-cphy-mode: Boolean value indicating if CPHY mode is wanted.
- qcom,mdss-mdp-transfer-time-us: Specifies the dsi transfer time for
command mode
panels in microseconds. Driver uses
this number to adjust
the clock rate according to the
expected transfer time.
This should go in a separate patch, shan't it?
diff --git a/drivers/gpu/drm/msm/dsi/dsi.c b/drivers/gpu/drm/msm/dsi/dsi.c
index 627048851d99..68d8547f7264 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.c
+++ b/drivers/gpu/drm/msm/dsi/dsi.c
@@ -13,7 +13,7 @@ struct drm_encoder *msm_dsi_get_encoder(struct msm_dsi
*msm_dsi)
return msm_dsi->encoder;
}
-static int dsi_get_phy(struct msm_dsi *msm_dsi)
+static int dsi_get_phy(struct msm_dsi *msm_dsi, bool *cphy_mode)
I see no need to pass the 'cphy_mode' through the bool pointer and back
to msm_dsi_host_init. What about just putting it into struct msm_dsi?
{
struct platform_device *pdev = msm_dsi->pdev;
struct platform_device *phy_pdev;
@@ -29,6 +29,7 @@ static int dsi_get_phy(struct msm_dsi *msm_dsi)
if (phy_pdev)
msm_dsi->phy = platform_get_drvdata(phy_pdev);
+ *cphy_mode = of_property_read_bool(phy_node, "qcom,dsi-phy-cphy-mode");
of_node_put(phy_node);
if (!phy_pdev || !msm_dsi->phy) {
@@ -65,6 +66,7 @@ static void dsi_destroy(struct msm_dsi *msm_dsi)
static struct msm_dsi *dsi_init(struct platform_device *pdev)
{
struct msm_dsi *msm_dsi;
+ bool cphy_mode;
int ret;
if (!pdev)
@@ -79,13 +81,13 @@ static struct msm_dsi *dsi_init(struct platform_device
*pdev)
msm_dsi->pdev = pdev;
platform_set_drvdata(pdev, msm_dsi);
- /* Init dsi host */
- ret = msm_dsi_host_init(msm_dsi);
+ /* GET dsi PHY */
+ ret = dsi_get_phy(msm_dsi, &cphy_mode);
if (ret)
goto destroy_dsi;
- /* GET dsi PHY */
- ret = dsi_get_phy(msm_dsi);
+ /* Init dsi host */
+ ret = msm_dsi_host_init(msm_dsi, cphy_mode);
if (ret)
goto destroy_dsi;
--
With best wishes
Dmitry
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
