This panel is quite similar to the similarly named N116BGE panel (the
nominal timings are, in fact identical).  However, let's add a new
entry because the full range of clocks listed for N116BGE aren't
supported for N116BCA-EA1, at least according to the datasheet.

Signed-off-by: Douglas Anderson <diand...@chromium.org>
---

Changes in v2:
- ("drm/panel-simple: Add N116BCA-EA1") new for v2.

 drivers/gpu/drm/panel/panel-simple.c | 33 ++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c 
b/drivers/gpu/drm/panel/panel-simple.c
index 823177d89d1b..76a1bebaaaf9 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2407,6 +2407,36 @@ static const struct panel_desc innolux_g121x1_l03 = {
        },
 };
 
+static const struct drm_display_mode innolux_n116bca_ea1_mode = {
+       .clock = 76420,
+       .hdisplay = 1366,
+       .hsync_start = 1366 + 136,
+       .hsync_end = 1366 + 136 + 30,
+       .htotal = 1366 + 136 + 30 + 60,
+       .vdisplay = 768,
+       .vsync_start = 768 + 8,
+       .vsync_end = 768 + 8 + 12,
+       .vtotal = 768 + 8 + 12 + 12,
+       .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+};
+
+static const struct panel_desc innolux_n116bca_ea1 = {
+       .modes = &innolux_n116bca_ea1_mode,
+       .num_modes = 1,
+       .bpc = 6,
+       .size = {
+               .width = 256,
+               .height = 144,
+       },
+       .delay = {
+               .hpd_absent_delay = 200,
+               .prepare_to_enable = 80,
+               .unprepare = 500,
+       },
+       .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
+       .connector_type = DRM_MODE_CONNECTOR_eDP,
+};
+
 /*
  * Datasheet specifies that at 60 Hz refresh rate:
  * - total horizontal time: { 1506, 1592, 1716 }
@@ -4320,6 +4350,9 @@ static const struct of_device_id platform_of_match[] = {
        }, {
                .compatible = "innolux,g121x1-l03",
                .data = &innolux_g121x1_l03,
+       }, {
+               .compatible = "innolux,n116bca-ea1",
+               .data = &innolux_n116bca_ea1,
        }, {
                .compatible = "innolux,n116bge",
                .data = &innolux_n116bge,
-- 
2.30.0.284.gd98b1dd5eaa7-goog

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to