The OnSemi FIN3385 Parallel-to-LVDS encoder has a dedicated input line to
select input pixel data sampling edge. Add DT property "pixelclk-active",
same as the one used by display timings, and configure bus flags based on
this DT property.
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Alexandre Torgue <alexandre.tor...@st.com>
Cc: Andrzej Hajda <a.ha...@samsung.com>
Cc: Antonio Borneo <antonio.bor...@st.com>
Cc: Benjamin Gaignard <benjamin.gaign...@st.com>
Cc: Biju Das <biju.das...@bp.renesas.com>
Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Cc: Maxime Coquelin <mcoquelin.st...@gmail.com>
Cc: Philippe Cornu <philippe.co...@st.com>
Cc: Sam Ravnborg <s...@ravnborg.org>
Cc: Vincent Abriou <vincent.abr...@st.com>
Cc: Yannick Fertre <yannick.fer...@st.com>
Cc: linux-arm-ker...@lists.infradead.org
Cc: linux-st...@st-md-mailman.stormreply.com
To: dri-devel@lists.freedesktop.org
---
V2: - Limit the pixelclk-active to encoders only
- Update DT binding document
---
.../bindings/display/bridge/lvds-codec.yaml | 7 +++
drivers/gpu/drm/bridge/lvds-codec.c | 52 +++++++++++++------
2 files changed, 44 insertions(+), 15 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
index e5e3c72630cf..399a6528780a 100644
--- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
@@ -74,6 +74,13 @@ properties:
additionalProperties: false
+ pixelclk-active:
+ description: |
+ Data sampling on rising or falling edge.
+ Use 0 to sample pixel data on rising edge and
+ Use 1 to sample pixel data on falling edge and
+ enum: [0, 1]
+
powerdown-gpios:
description:
The GPIO used to control the power down line of this device.
diff --git a/drivers/gpu/drm/bridge/lvds-codec.c
b/drivers/gpu/drm/bridge/lvds-codec.c
index dcf579a4cf83..cab81ccd895d 100644
--- a/drivers/gpu/drm/bridge/lvds-codec.c
+++ b/drivers/gpu/drm/bridge/lvds-codec.c
@@ -15,13 +15,18 @@
#include <drm/drm_bridge.h>
#include <drm/drm_panel.h>
+struct lvds_codec_data {
+ u32 connector_type;
+ bool is_encoder;
+};
+
struct lvds_codec {
struct device *dev;
struct drm_bridge bridge;
struct drm_bridge *panel_bridge;
+ struct drm_bridge_timings timings;
struct regulator *vcc;
struct gpio_desc *powerdown_gpio;
- u32 connector_type;
};
static inline struct lvds_codec *to_lvds_codec(struct drm_bridge *bridge)
@@ -76,17 +81,20 @@ static const struct drm_bridge_funcs funcs = {
static int lvds_codec_probe(struct platform_device *pdev)
{
+ const struct lvds_codec_data *data;
struct device *dev = &pdev->dev;
struct device_node *panel_node;
struct drm_panel *panel;
struct lvds_codec *lvds_codec;
+ u32 val;
lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL);
if (!lvds_codec)
return -ENOMEM;
+ data = of_device_get_match_data(dev);
+
lvds_codec->dev = &pdev->dev;
- lvds_codec->connector_type = (uintptr_t)of_device_get_match_data(dev);
lvds_codec->vcc = devm_regulator_get(lvds_codec->dev, "power");
if (IS_ERR(lvds_codec->vcc))
@@ -115,10 +123,22 @@ static int lvds_codec_probe(struct platform_device *pdev)
lvds_codec->panel_bridge =
devm_drm_panel_bridge_add_typed(dev, panel,
- lvds_codec->connector_type);
+ data->connector_type);
if (IS_ERR(lvds_codec->panel_bridge))
return PTR_ERR(lvds_codec->panel_bridge);
+ /*
+ * Encoder might sample data on different clock edge than the display,
+ * for example OnSemi FIN3385 has a dedicated strapping pin to select
+ * the sampling edge.
+ */
+ if (data->is_encoder &&
+ !of_property_read_u32(dev->of_node, "pixelclk-active", &val)) {
+ lvds_codec->timings.input_bus_flags = val ?
+ DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE :
+ DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE;
+ }
+
/*
* The panel_bridge bridge is attached to the panel's of_node,
* but we need a bridge attached to our of_node for our user
@@ -126,6 +146,7 @@ static int lvds_codec_probe(struct platform_device *pdev)
*/
lvds_codec->bridge.of_node = dev->of_node;
lvds_codec->bridge.funcs = &funcs;
+ lvds_codec->bridge.timings = &lvds_codec->timings;
drm_bridge_add(&lvds_codec->bridge);
platform_set_drvdata(pdev, lvds_codec);
@@ -142,19 +163,20 @@ static int lvds_codec_remove(struct platform_device *pdev)
return 0;
}
+static const struct lvds_codec_data decoder_data = {
+ .connector_type = DRM_MODE_CONNECTOR_DPI,
+ .is_encoder = false,
+};
+
+static const struct lvds_codec_data encoder_data = {
+ .connector_type = DRM_MODE_CONNECTOR_LVDS,
+ .is_encoder = true,
+};
+
static const struct of_device_id lvds_codec_match[] = {
- {
- .compatible = "lvds-decoder",
- .data = (void *)DRM_MODE_CONNECTOR_DPI,
- },
- {
- .compatible = "lvds-encoder",
- .data = (void *)DRM_MODE_CONNECTOR_LVDS,
- },
- {
- .compatible = "thine,thc63lvdm83d",
- .data = (void *)DRM_MODE_CONNECTOR_LVDS,
- },
+ { .compatible = "lvds-decoder", .data = &decoder_data, },
+ { .compatible = "lvds-encoder", .data = &encoder_data, },
+ { .compatible = "thine,thc63lvdm83d", .data = &encoder_data, },
{},
};
MODULE_DEVICE_TABLE(of, lvds_codec_match);
--
2.29.2
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
