Hi, On Tue, Nov 24, 2020 at 02:45:08PM +0200, Tomi Valkeinen wrote: > At the moment we have three different modules: omapdss-base, omapdss, > omapdrm. This setup is finally obsolete, as the last omapdrm specific > panel has been converted to DRM panel. > > We can thus remove omapdss-base and omapdss, and just compile everything > into omapdrm.ko. > > Signed-off-by: Tomi Valkeinen <tomi.valkei...@ti.com> > Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com> > ---
Reviewed-by: Sebastian Reichel <sebastian.reic...@collabora.com> -- Sebastian > drivers/gpu/drm/omapdrm/Kconfig | 119 ++++++++++++++++++++++- > drivers/gpu/drm/omapdrm/Makefile | 17 +++- > drivers/gpu/drm/omapdrm/dss/Kconfig | 132 -------------------------- > drivers/gpu/drm/omapdrm/dss/Makefile | 18 ---- > drivers/gpu/drm/omapdrm/dss/base.c | 24 +---- > drivers/gpu/drm/omapdrm/dss/display.c | 2 - > drivers/gpu/drm/omapdrm/dss/dss.c | 11 +-- > drivers/gpu/drm/omapdrm/dss/omapdss.h | 3 + > drivers/gpu/drm/omapdrm/dss/output.c | 11 --- > drivers/gpu/drm/omapdrm/omap_drv.c | 20 +++- > 10 files changed, 155 insertions(+), 202 deletions(-) > delete mode 100644 drivers/gpu/drm/omapdrm/dss/Kconfig > delete mode 100644 drivers/gpu/drm/omapdrm/dss/Makefile > > diff --git a/drivers/gpu/drm/omapdrm/Kconfig b/drivers/gpu/drm/omapdrm/Kconfig > index cea3f44ea6d4..e7281da5bc6a 100644 > --- a/drivers/gpu/drm/omapdrm/Kconfig > +++ b/drivers/gpu/drm/omapdrm/Kconfig > @@ -5,12 +5,129 @@ config DRM_OMAP > depends on ARCH_OMAP2PLUS || ARCH_MULTIPLATFORM > select OMAP2_DSS > select DRM_KMS_HELPER > + select VIDEOMODE_HELPERS > + select HDMI > default n > help > DRM display driver for OMAP2/3/4 based boards. > > if DRM_OMAP > > -source "drivers/gpu/drm/omapdrm/dss/Kconfig" > +config OMAP2_DSS_DEBUG > + bool "Debug support" > + default n > + help > + This enables printing of debug messages. Alternatively, debug messages > + can also be enabled by setting CONFIG_DYNAMIC_DEBUG and then setting > + appropriate flags in <debugfs>/dynamic_debug/control. > + > +config OMAP2_DSS_DEBUGFS > + bool "Debugfs filesystem support" > + depends on DEBUG_FS > + default n > + help > + This enables debugfs for OMAPDSS at <debugfs>/omapdss. This enables > + querying about clock configuration and register configuration of dss, > + dispc, dsi, hdmi and rfbi. > + > +config OMAP2_DSS_COLLECT_IRQ_STATS > + bool "Collect DSS IRQ statistics" > + depends on OMAP2_DSS_DEBUGFS > + default n > + help > + Collect DSS IRQ statistics, printable via debugfs. > + > + The statistics can be found from > + <debugfs>/omapdss/dispc_irq for DISPC interrupts, and > + <debugfs>/omapdss/dsi_irq for DSI interrupts. > + > +config OMAP2_DSS_DPI > + bool "DPI support" > + default y > + help > + DPI Interface. This is the Parallel Display Interface. > + > +config OMAP2_DSS_VENC > + bool "VENC support" > + default y > + help > + OMAP Video Encoder support for S-Video and composite TV-out. > + > +config OMAP2_DSS_HDMI_COMMON > + bool > + > +config OMAP4_DSS_HDMI > + bool "HDMI support for OMAP4" > + default y > + select OMAP2_DSS_HDMI_COMMON > + help > + HDMI support for OMAP4 based SoCs. > + > +config OMAP4_DSS_HDMI_CEC > + bool "Enable HDMI CEC support for OMAP4" > + depends on OMAP4_DSS_HDMI > + select CEC_CORE > + default y > + help > + When selected the HDMI transmitter will support the CEC feature. > + > +config OMAP5_DSS_HDMI > + bool "HDMI support for OMAP5" > + default n > + select OMAP2_DSS_HDMI_COMMON > + help > + HDMI Interface for OMAP5 and similar cores. This adds the High > + Definition Multimedia Interface. See http://www.hdmi.org/ for HDMI > + specification. > + > +config OMAP2_DSS_SDI > + bool "SDI support" > + default n > + help > + SDI (Serial Display Interface) support. > + > + SDI is a high speed one-way display serial bus between the host > + processor and a display. > + > +config OMAP2_DSS_DSI > + bool "DSI support" > + default n > + select DRM_MIPI_DSI > + help > + MIPI DSI (Display Serial Interface) support. > + > + DSI is a high speed half-duplex serial interface between the host > + processor and a peripheral, such as a display or a framebuffer chip. > + > + See http://www.mipi.org/ for DSI specifications. > + > +config OMAP2_DSS_MIN_FCK_PER_PCK > + int "Minimum FCK/PCK ratio (for scaling)" > + range 0 32 > + default 0 > + help > + This can be used to adjust the minimum FCK/PCK ratio. > + > + With this you can make sure that DISPC FCK is at least > + n x PCK. Video plane scaling requires higher FCK than > + normally. > + > + If this is set to 0, there's no extra constraint on the > + DISPC FCK. However, the FCK will at minimum be > + 2xPCK (if active matrix) or 3xPCK (if passive matrix). > + > + Max FCK is 173MHz, so this doesn't work if your PCK > + is very high. > + > +config OMAP2_DSS_SLEEP_AFTER_VENC_RESET > + bool "Sleep 20ms after VENC reset" > + default y > + help > + There is a 20ms sleep after VENC reset which seemed to fix the > + reset. The reason for the bug is unclear, and it's also unclear > + on what platforms this happens. > + > + This option enables the sleep, and is enabled by default. You can > + disable the sleep if it doesn't cause problems on your platform. > > endif > diff --git a/drivers/gpu/drm/omapdrm/Makefile > b/drivers/gpu/drm/omapdrm/Makefile > index 2a404e045b78..33fe7e937680 100644 > --- a/drivers/gpu/drm/omapdrm/Makefile > +++ b/drivers/gpu/drm/omapdrm/Makefile > @@ -4,8 +4,6 @@ > # Direct Rendering Infrastructure (DRI) > # > > -obj-y += dss/ > - > omapdrm-y := omap_drv.o \ > omap_irq.o \ > omap_debugfs.o \ > @@ -20,4 +18,17 @@ omapdrm-y := omap_drv.o \ > > omapdrm-$(CONFIG_DRM_FBDEV_EMULATION) += omap_fbdev.o > > -obj-$(CONFIG_DRM_OMAP) += omapdrm.o > +omapdrm-y += dss/base.o dss/display.o dss/output.o dss/dss.o dss/dispc.o \ > + dss/dispc_coefs.o dss/pll.o dss/video-pll.o > +omapdrm-$(CONFIG_OMAP2_DSS_DPI) += dss/dpi.o > +omapdrm-$(CONFIG_OMAP2_DSS_VENC) += dss/venc.o > +omapdrm-$(CONFIG_OMAP2_DSS_SDI) += dss/sdi.o > +omapdrm-$(CONFIG_OMAP2_DSS_DSI) += dss/dsi.o > +omapdrm-$(CONFIG_OMAP2_DSS_HDMI_COMMON) += dss/hdmi_common.o dss/hdmi_wp.o \ > + dss/hdmi_pll.o dss/hdmi_phy.o > +omapdrm-$(CONFIG_OMAP4_DSS_HDMI) += dss/hdmi4.o dss/hdmi4_core.o > +omapdrm-$(CONFIG_OMAP4_DSS_HDMI_CEC) += dss/hdmi4_cec.o > +omapdrm-$(CONFIG_OMAP5_DSS_HDMI) += dss/hdmi5.o dss/hdmi5_core.o > +ccflags-$(CONFIG_OMAP2_DSS_DEBUG) += -DDEBUG > + > +obj-$(CONFIG_DRM_OMAP) += omapdrm.o > diff --git a/drivers/gpu/drm/omapdrm/dss/Kconfig > b/drivers/gpu/drm/omapdrm/dss/Kconfig > deleted file mode 100644 > index 6ec80771af3d..000000000000 > --- a/drivers/gpu/drm/omapdrm/dss/Kconfig > +++ /dev/null > @@ -1,132 +0,0 @@ > -# SPDX-License-Identifier: GPL-2.0-only > -config OMAP_DSS_BASE > - tristate > - > -menuconfig OMAP2_DSS > - tristate "OMAP2+ Display Subsystem support" > - select OMAP_DSS_BASE > - select VIDEOMODE_HELPERS > - select HDMI > - help > - OMAP2+ Display Subsystem support. > - > -if OMAP2_DSS > - > -config OMAP2_DSS_DEBUG > - bool "Debug support" > - default n > - help > - This enables printing of debug messages. Alternatively, debug messages > - can also be enabled by setting CONFIG_DYNAMIC_DEBUG and then setting > - appropriate flags in <debugfs>/dynamic_debug/control. > - > -config OMAP2_DSS_DEBUGFS > - bool "Debugfs filesystem support" > - depends on DEBUG_FS > - default n > - help > - This enables debugfs for OMAPDSS at <debugfs>/omapdss. This enables > - querying about clock configuration and register configuration of dss, > - dispc, dsi, hdmi and rfbi. > - > -config OMAP2_DSS_COLLECT_IRQ_STATS > - bool "Collect DSS IRQ statistics" > - depends on OMAP2_DSS_DEBUGFS > - default n > - help > - Collect DSS IRQ statistics, printable via debugfs. > - > - The statistics can be found from > - <debugfs>/omapdss/dispc_irq for DISPC interrupts, and > - <debugfs>/omapdss/dsi_irq for DSI interrupts. > - > -config OMAP2_DSS_DPI > - bool "DPI support" > - default y > - help > - DPI Interface. This is the Parallel Display Interface. > - > -config OMAP2_DSS_VENC > - bool "VENC support" > - default y > - help > - OMAP Video Encoder support for S-Video and composite TV-out. > - > -config OMAP2_DSS_HDMI_COMMON > - bool > - > -config OMAP4_DSS_HDMI > - bool "HDMI support for OMAP4" > - default y > - select OMAP2_DSS_HDMI_COMMON > - help > - HDMI support for OMAP4 based SoCs. > - > -config OMAP4_DSS_HDMI_CEC > - bool "Enable HDMI CEC support for OMAP4" > - depends on OMAP4_DSS_HDMI > - select CEC_CORE > - default y > - help > - When selected the HDMI transmitter will support the CEC feature. > - > -config OMAP5_DSS_HDMI > - bool "HDMI support for OMAP5" > - default n > - select OMAP2_DSS_HDMI_COMMON > - help > - HDMI Interface for OMAP5 and similar cores. This adds the High > - Definition Multimedia Interface. See http://www.hdmi.org/ for HDMI > - specification. > - > -config OMAP2_DSS_SDI > - bool "SDI support" > - default n > - help > - SDI (Serial Display Interface) support. > - > - SDI is a high speed one-way display serial bus between the host > - processor and a display. > - > -config OMAP2_DSS_DSI > - bool "DSI support" > - default n > - select DRM_MIPI_DSI > - help > - MIPI DSI (Display Serial Interface) support. > - > - DSI is a high speed half-duplex serial interface between the host > - processor and a peripheral, such as a display or a framebuffer chip. > - > - See http://www.mipi.org/ for DSI specifications. > - > -config OMAP2_DSS_MIN_FCK_PER_PCK > - int "Minimum FCK/PCK ratio (for scaling)" > - range 0 32 > - default 0 > - help > - This can be used to adjust the minimum FCK/PCK ratio. > - > - With this you can make sure that DISPC FCK is at least > - n x PCK. Video plane scaling requires higher FCK than > - normally. > - > - If this is set to 0, there's no extra constraint on the > - DISPC FCK. However, the FCK will at minimum be > - 2xPCK (if active matrix) or 3xPCK (if passive matrix). > - > - Max FCK is 173MHz, so this doesn't work if your PCK > - is very high. > - > -config OMAP2_DSS_SLEEP_AFTER_VENC_RESET > - bool "Sleep 20ms after VENC reset" > - default y > - help > - There is a 20ms sleep after VENC reset which seemed to fix the > - reset. The reason for the bug is unclear, and it's also unclear > - on what platforms this happens. > - > - This option enables the sleep, and is enabled by default. You can > - disable the sleep if it doesn't cause problems on your platform. > - > -endif > diff --git a/drivers/gpu/drm/omapdrm/dss/Makefile > b/drivers/gpu/drm/omapdrm/dss/Makefile > deleted file mode 100644 > index 811966cd7468..000000000000 > --- a/drivers/gpu/drm/omapdrm/dss/Makefile > +++ /dev/null > @@ -1,18 +0,0 @@ > -# SPDX-License-Identifier: GPL-2.0 > -obj-$(CONFIG_OMAP_DSS_BASE) += omapdss-base.o > -omapdss-base-y := base.o display.o output.o > - > -obj-$(CONFIG_OMAP2_DSS) += omapdss.o > -# Core DSS files > -omapdss-y := dss.o dispc.o dispc_coefs.o \ > - pll.o video-pll.o > -omapdss-$(CONFIG_OMAP2_DSS_DPI) += dpi.o > -omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o > -omapdss-$(CONFIG_OMAP2_DSS_SDI) += sdi.o > -omapdss-$(CONFIG_OMAP2_DSS_DSI) += dsi.o > -omapdss-$(CONFIG_OMAP2_DSS_HDMI_COMMON) += hdmi_common.o hdmi_wp.o > hdmi_pll.o \ > - hdmi_phy.o > -omapdss-$(CONFIG_OMAP4_DSS_HDMI) += hdmi4.o hdmi4_core.o > -omapdss-$(CONFIG_OMAP4_DSS_HDMI_CEC) += hdmi4_cec.o > -omapdss-$(CONFIG_OMAP5_DSS_HDMI) += hdmi5.o hdmi5_core.o > -ccflags-$(CONFIG_OMAP2_DSS_DEBUG) += -DDEBUG > diff --git a/drivers/gpu/drm/omapdrm/dss/base.c > b/drivers/gpu/drm/omapdrm/dss/base.c > index d0d5d9c8ca76..6c57d9292415 100644 > --- a/drivers/gpu/drm/omapdrm/dss/base.c > +++ b/drivers/gpu/drm/omapdrm/dss/base.c > @@ -20,14 +20,11 @@ struct dispc_device *dispc_get_dispc(struct dss_device > *dss) > { > return dss->dispc; > } > -EXPORT_SYMBOL(dispc_get_dispc); > > const struct dispc_ops *dispc_get_ops(struct dss_device *dss) > { > return dss->dispc_ops; > } > -EXPORT_SYMBOL(dispc_get_ops); > - > > /* > ----------------------------------------------------------------------------- > * OMAP DSS Devices Handling > @@ -42,7 +39,6 @@ void omapdss_device_register(struct omap_dss_device *dssdev) > list_add_tail(&dssdev->list, &omapdss_devices_list); > mutex_unlock(&omapdss_devices_lock); > } > -EXPORT_SYMBOL_GPL(omapdss_device_register); > > void omapdss_device_unregister(struct omap_dss_device *dssdev) > { > @@ -50,7 +46,6 @@ void omapdss_device_unregister(struct omap_dss_device > *dssdev) > list_del(&dssdev->list); > mutex_unlock(&omapdss_devices_lock); > } > -EXPORT_SYMBOL_GPL(omapdss_device_unregister); > > static bool omapdss_device_is_registered(struct device_node *node) > { > @@ -72,24 +67,16 @@ static bool omapdss_device_is_registered(struct > device_node *node) > > struct omap_dss_device *omapdss_device_get(struct omap_dss_device *dssdev) > { > - if (!try_module_get(dssdev->owner)) > + if (get_device(dssdev->dev) == NULL) > return NULL; > > - if (get_device(dssdev->dev) == NULL) { > - module_put(dssdev->owner); > - return NULL; > - } > - > return dssdev; > } > -EXPORT_SYMBOL(omapdss_device_get); > > void omapdss_device_put(struct omap_dss_device *dssdev) > { > put_device(dssdev->dev); > - module_put(dssdev->owner); > } > -EXPORT_SYMBOL(omapdss_device_put); > > struct omap_dss_device *omapdss_find_device_by_node(struct device_node *node) > { > @@ -150,7 +137,6 @@ struct omap_dss_device *omapdss_device_next_output(struct > omap_dss_device *from) > mutex_unlock(&omapdss_devices_lock); > return dssdev; > } > -EXPORT_SYMBOL(omapdss_device_next_output); > > static bool omapdss_device_is_connected(struct omap_dss_device *dssdev) > { > @@ -181,7 +167,6 @@ int omapdss_device_connect(struct dss_device *dss, > > return 0; > } > -EXPORT_SYMBOL_GPL(omapdss_device_connect); > > void omapdss_device_disconnect(struct omap_dss_device *src, > struct omap_dss_device *dst) > @@ -204,7 +189,6 @@ void omapdss_device_disconnect(struct omap_dss_device > *src, > > dst->dss = NULL; > } > -EXPORT_SYMBOL_GPL(omapdss_device_disconnect); > > /* > ----------------------------------------------------------------------------- > * Components Handling > @@ -290,7 +274,6 @@ void omapdss_gather_components(struct device *dev) > for_each_available_child_of_node(dev->of_node, child) > omapdss_walk_device(dev, child, true); > } > -EXPORT_SYMBOL(omapdss_gather_components); > > static bool omapdss_component_is_loaded(struct omapdss_comp_node *comp) > { > @@ -315,8 +298,3 @@ bool omapdss_stack_is_ready(void) > > return true; > } > -EXPORT_SYMBOL(omapdss_stack_is_ready); > - > -MODULE_AUTHOR("Tomi Valkeinen <tomi.valkei...@ti.com>"); > -MODULE_DESCRIPTION("OMAP Display Subsystem Base"); > -MODULE_LICENSE("GPL v2"); > diff --git a/drivers/gpu/drm/omapdrm/dss/display.c > b/drivers/gpu/drm/omapdrm/dss/display.c > index 3b82158b1bfd..7b7ee2019eae 100644 > --- a/drivers/gpu/drm/omapdrm/dss/display.c > +++ b/drivers/gpu/drm/omapdrm/dss/display.c > @@ -38,7 +38,6 @@ void omapdss_display_init(struct omap_dss_device *dssdev) > dssdev->name = devm_kasprintf(dssdev->dev, GFP_KERNEL, > "display%u", id); > } > -EXPORT_SYMBOL_GPL(omapdss_display_init); > > int omapdss_display_get_modes(struct drm_connector *connector, > const struct videomode *vm) > @@ -57,4 +56,3 @@ int omapdss_display_get_modes(struct drm_connector > *connector, > > return 1; > } > -EXPORT_SYMBOL_GPL(omapdss_display_get_modes); > diff --git a/drivers/gpu/drm/omapdrm/dss/dss.c > b/drivers/gpu/drm/omapdrm/dss/dss.c > index 6a160138bf88..2d566ff81c55 100644 > --- a/drivers/gpu/drm/omapdrm/dss/dss.c > +++ b/drivers/gpu/drm/omapdrm/dss/dss.c > @@ -1638,21 +1638,14 @@ static struct platform_driver * const > omap_dss_drivers[] = { > #endif > }; > > -static int __init omap_dss_init(void) > +int __init omap_dss_init(void) > { > return platform_register_drivers(omap_dss_drivers, > ARRAY_SIZE(omap_dss_drivers)); > } > > -static void __exit omap_dss_exit(void) > +void omap_dss_exit(void) > { > platform_unregister_drivers(omap_dss_drivers, > ARRAY_SIZE(omap_dss_drivers)); > } > - > -module_init(omap_dss_init); > -module_exit(omap_dss_exit); > - > -MODULE_AUTHOR("Tomi Valkeinen <tomi.valkei...@ti.com>"); > -MODULE_DESCRIPTION("OMAP2/3/4/5 Display Subsystem"); > -MODULE_LICENSE("GPL v2"); > diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h > b/drivers/gpu/drm/omapdrm/dss/omapdss.h > index 4a0826c8fed5..4e7ae164de4f 100644 > --- a/drivers/gpu/drm/omapdrm/dss/omapdss.h > +++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h > @@ -458,4 +458,7 @@ const struct dispc_ops *dispc_get_ops(struct dss_device > *dss); > bool omapdss_stack_is_ready(void); > void omapdss_gather_components(struct device *dev); > > +int omap_dss_init(void); > +void omap_dss_exit(void); > + > #endif /* __OMAP_DRM_DSS_H */ > diff --git a/drivers/gpu/drm/omapdrm/dss/output.c > b/drivers/gpu/drm/omapdrm/dss/output.c > index 40cb353572f6..7a14d2b5b2f7 100644 > --- a/drivers/gpu/drm/omapdrm/dss/output.c > +++ b/drivers/gpu/drm/omapdrm/dss/output.c > @@ -73,7 +73,6 @@ int omapdss_device_init_output(struct omap_dss_device *out, > omapdss_device_cleanup_output(out); > return ret; > } > -EXPORT_SYMBOL(omapdss_device_init_output); > > void omapdss_device_cleanup_output(struct omap_dss_device *out) > { > @@ -81,7 +80,6 @@ void omapdss_device_cleanup_output(struct omap_dss_device > *out) > drm_panel_bridge_remove(out->next_bridge ? > out->next_bridge : out->bridge); > } > -EXPORT_SYMBOL(omapdss_device_cleanup_output); > > int dss_install_mgr_ops(struct dss_device *dss, > const struct dss_mgr_ops *mgr_ops, > @@ -95,14 +93,12 @@ int dss_install_mgr_ops(struct dss_device *dss, > > return 0; > } > -EXPORT_SYMBOL(dss_install_mgr_ops); > > void dss_uninstall_mgr_ops(struct dss_device *dss) > { > dss->mgr_ops = NULL; > dss->mgr_ops_priv = NULL; > } > -EXPORT_SYMBOL(dss_uninstall_mgr_ops); > > void dss_mgr_set_timings(struct omap_dss_device *dssdev, > const struct videomode *vm) > @@ -110,7 +106,6 @@ void dss_mgr_set_timings(struct omap_dss_device *dssdev, > dssdev->dss->mgr_ops->set_timings(dssdev->dss->mgr_ops_priv, > dssdev->dispc_channel, vm); > } > -EXPORT_SYMBOL(dss_mgr_set_timings); > > void dss_mgr_set_lcd_config(struct omap_dss_device *dssdev, > const struct dss_lcd_mgr_config *config) > @@ -118,28 +113,24 @@ void dss_mgr_set_lcd_config(struct omap_dss_device > *dssdev, > dssdev->dss->mgr_ops->set_lcd_config(dssdev->dss->mgr_ops_priv, > dssdev->dispc_channel, config); > } > -EXPORT_SYMBOL(dss_mgr_set_lcd_config); > > int dss_mgr_enable(struct omap_dss_device *dssdev) > { > return dssdev->dss->mgr_ops->enable(dssdev->dss->mgr_ops_priv, > dssdev->dispc_channel); > } > -EXPORT_SYMBOL(dss_mgr_enable); > > void dss_mgr_disable(struct omap_dss_device *dssdev) > { > dssdev->dss->mgr_ops->disable(dssdev->dss->mgr_ops_priv, > dssdev->dispc_channel); > } > -EXPORT_SYMBOL(dss_mgr_disable); > > void dss_mgr_start_update(struct omap_dss_device *dssdev) > { > dssdev->dss->mgr_ops->start_update(dssdev->dss->mgr_ops_priv, > dssdev->dispc_channel); > } > -EXPORT_SYMBOL(dss_mgr_start_update); > > int dss_mgr_register_framedone_handler(struct omap_dss_device *dssdev, > void (*handler)(void *), void *data) > @@ -150,7 +141,6 @@ int dss_mgr_register_framedone_handler(struct > omap_dss_device *dssdev, > dssdev->dispc_channel, > handler, data); > } > -EXPORT_SYMBOL(dss_mgr_register_framedone_handler); > > void dss_mgr_unregister_framedone_handler(struct omap_dss_device *dssdev, > void (*handler)(void *), void *data) > @@ -161,4 +151,3 @@ void dss_mgr_unregister_framedone_handler(struct > omap_dss_device *dssdev, > dssdev->dispc_channel, > handler, data); > } > -EXPORT_SYMBOL(dss_mgr_unregister_framedone_handler); > diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c > b/drivers/gpu/drm/omapdrm/omap_drv.c > index dbb8e95234b3..b6ba4a43f217 100644 > --- a/drivers/gpu/drm/omapdrm/omap_drv.c > +++ b/drivers/gpu/drm/omapdrm/omap_drv.c > @@ -741,9 +741,21 @@ static struct platform_driver * const drivers[] = { > > static int __init omap_drm_init(void) > { > + int r; > + > DBG("init"); > > - return platform_register_drivers(drivers, ARRAY_SIZE(drivers)); > + r = omap_dss_init(); > + if (r) > + return r; > + > + r = platform_register_drivers(drivers, ARRAY_SIZE(drivers)); > + if (r) { > + omap_dss_exit(); > + return r; > + } > + > + return 0; > } > > static void __exit omap_drm_fini(void) > @@ -751,13 +763,15 @@ static void __exit omap_drm_fini(void) > DBG("fini"); > > platform_unregister_drivers(drivers, ARRAY_SIZE(drivers)); > + > + omap_dss_exit(); > } > > -/* need late_initcall() so we load after dss_driver's are loaded */ > -late_initcall(omap_drm_init); > +module_init(omap_drm_init); > module_exit(omap_drm_fini); > > MODULE_AUTHOR("Rob Clark <r...@ti.com>"); > +MODULE_AUTHOR("Tomi Valkeinen <tomi.valkei...@ti.com>"); > MODULE_DESCRIPTION("OMAP DRM Display Driver"); > MODULE_ALIAS("platform:" DRIVER_NAME); > MODULE_LICENSE("GPL v2"); > -- > Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. > Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki >
signature.asc
Description: PGP signature
_______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
