On 2020-11-24 at 19:44:59 +0530, Ramalingam C wrote:
> On 2020-11-11 at 11:50:41 +0530, Anshuman Gupta wrote:
> > Enable HDCP 1.4 DP MST stream encryption.
> >
> > Enable stream encryption once encryption is enabled on
> > the DP transport driving the link for each stream which
> > has requested encryption.
> >
> > Disable stream encryption for each stream that no longer
> > requires encryption before disabling HDCP encryption on
> > the link.
> >
> > v2:
> > - Added debug print for stream encryption.
> > - Disable the hdcp on port after disabling last stream
> > encryption.
> > v3:
> > - Cosmetic change, removed the value less comment. [Uma]
> > v4:
> > - Split the Gen12 HDCP enablement patch. [Ram]
> > - Add connector details in drm_err.
> >
> > Cc: Ramalingam C <ramalinga...@intel.com>
> > Reviewed-by: Uma Shankar <uma.shan...@intel.com>
> > Signed-off-by: Anshuman Gupta <anshuman.gu...@intel.com>
> > ---
> > drivers/gpu/drm/i915/display/intel_hdcp.c | 45 ++++++++++++++++-------
> > 1 file changed, 31 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_hdcp.c
> > b/drivers/gpu/drm/i915/display/intel_hdcp.c
> > index 0322a83c151d..e12bd0ac9fb5 100644
> > --- a/drivers/gpu/drm/i915/display/intel_hdcp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_hdcp.c
> > @@ -612,7 +612,12 @@ int intel_hdcp_auth_downstream(struct intel_connector
> > *connector)
> > return ret;
> > }
> >
> > -/* Implements Part 1 of the HDCP authorization procedure */
> > +/*
> > + * Implements Part 1 of the HDCP authorization procedure.
> > + * Authentication Part 1 steps for Multi-stream DisplayPort.
> > + * Step 1. Auth Part 1 sequence on the driving MST Trasport Link.
> > + * Step 2. Enable encryption for each stream that requires encryption.
> > +1*/
> IMO this function is generic for SST and MST. Why do we document only
> for MST at the top of the function? We can remove them.
Sure i will remove it.
> > static int intel_hdcp_auth(struct intel_connector *connector)
> > {
> > struct intel_digital_port *dig_port =
> > intel_attached_dig_port(connector);
> > @@ -766,10 +771,17 @@ static int intel_hdcp_auth(struct intel_connector
> > *connector)
> > return -ETIMEDOUT;
> > }
> >
> > - /*
> > - * XXX: If we have MST-connected devices, we need to enable encryption
> > - * on those as well.
> > - */
> > + /* DP MST Auth Part 1 Step 2.a and Step 2.b */
> > + if (shim->stream_encryption) {
> > + ret = shim->stream_encryption(connector, true);
> > + if (ret) {
> > + drm_err(&dev_priv->drm, "[CONNECTOR:%d:%s] Failed to
> > enable HDCP 1.4 stream enc\n",
> All the existing error messgae has the %s:%d, why are we changing it
> here? Could we retain the uniformity?
Sure i will fix this in entire series.
> > + connector->base.base.id, connector->base.name);
> > + return ret;
> > + }
> > + drm_dbg_kms(&dev_priv->drm, "HDCP 1.4 transcoder: %s stream
> > encrypted\n",
> > + transcoder_name(hdcp->stream_transcoder));
> > + }
> >
> > if (repeater_present)
> > return intel_hdcp_auth_downstream(connector);
> > @@ -791,18 +803,23 @@ static int _intel_hdcp_disable(struct intel_connector
> > *connector)
> > drm_dbg_kms(&dev_priv->drm, "[%s:%d] HDCP is being disabled...\n",
> > connector->base.name, connector->base.base.id);
> >
> > + if (hdcp->shim->stream_encryption) {
> > + ret = hdcp->shim->stream_encryption(connector, false);
> > + if (ret) {
> > + drm_err(&dev_priv->drm, "[CONNECTOR:%d:%s] Failed to
> > disable HDCP 1.4 stream enc\n",
> same here. remove CONNECTOR ?
> > + connector->base.base.id, connector->base.name);
> > + return ret;
> > + }
> > + drm_dbg_kms(&dev_priv->drm, "HDCP 1.4 transcoder: %s stream
> > encryption disabled\n",
> > + transcoder_name(hdcp->stream_transcoder));
> > + }
> > +
> > /*
> > - * If there are other connectors on this port using HDCP, don't disable
> > - * it. Instead, toggle the HDCP signalling off on that particular
> > - * connector/pipe and exit.
> > + * If there are other connectors on this port using HDCP, don't disable
> > it.
> > + * Repeat steps 1-2 for each stream that no longer requires encryption.
> What is this steps 1-2 here!? Here you are not disabling if other
> streams are encrpted. May be you want to put something like "Untill all
> steams of MST stopped encrypting, dont disable the port encryption"
Sure i will fix this.
Thanks,
Anshuman.
>
> -Ram
> > */
> > - if (dig_port->num_hdcp_streams > 0) {
> > - ret = hdcp->shim->toggle_signalling(dig_port,
> > - cpu_transcoder, false);
> > - if (ret)
> > - DRM_ERROR("Failed to disable HDCP signalling\n");
> > + if (dig_port->num_hdcp_streams > 0)
> > return ret;
> > - }
> >
> > hdcp->hdcp_encrypted = false;
> > intel_de_write(dev_priv, HDCP_CONF(dev_priv, cpu_transcoder, port), 0);
> > --
> > 2.26.2
> >
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
