Hi!
On Mon, Nov 02, 2020 at 05:47:04PM +0900, Hoegeun Kwon wrote:
> Hi Maxime,
>
> Thanks for V2 patch.
>
>
> On 10/28/20 9:41 PM, Maxime Ripard wrote:
> > The current HVS muxing code will consider the CRTCs in a given state to
> > setup their muxing in the HVS, and disable the other CRTCs muxes.
> >
> > However, it's valid to only update a single CRTC with a state, and in this
> > situation we would mux out a CRTC that was enabled but left untouched by
> > the new state.
> >
> > Fix this by setting a flag on the CRTC state when the muxing has been
> > changed, and only change the muxing configuration when that flag is there.
> >
> > Fixes: 87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel
> > automatically")
> > Signed-off-by: Maxime Ripard <max...@cerno.tech>
> > ---
> > drivers/gpu/drm/vc4/vc4_drv.h | 1 +-
> > drivers/gpu/drm/vc4/vc4_kms.c | 84 +++++++++++++++++++++---------------
> > 2 files changed, 50 insertions(+), 35 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
> > index c6208b040f77..c074c0538e57 100644
> > --- a/drivers/gpu/drm/vc4/vc4_drv.h
> > +++ b/drivers/gpu/drm/vc4/vc4_drv.h
> > @@ -523,6 +523,7 @@ struct vc4_crtc_state {
> > struct drm_mm_node mm;
> > bool feed_txp;
> > bool txp_armed;
> > + bool needs_muxing;
> > unsigned int assigned_channel;
> >
> > struct {
> > diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c
> > index 2aa726b7422c..409aeb19d210 100644
> > --- a/drivers/gpu/drm/vc4/vc4_kms.c
> > +++ b/drivers/gpu/drm/vc4/vc4_kms.c
> > @@ -224,10 +224,7 @@ static void vc5_hvs_pv_muxing_commit(struct vc4_dev
> > *vc4,
> > {
> > struct drm_crtc_state *crtc_state;
> > struct drm_crtc *crtc;
> > - unsigned char dsp2_mux = 0;
> > - unsigned char dsp3_mux = 3;
> > - unsigned char dsp4_mux = 3;
> > - unsigned char dsp5_mux = 3;
> > + unsigned char mux;
> > unsigned int i;
> > u32 reg;
> >
> > @@ -235,50 +232,59 @@ static void vc5_hvs_pv_muxing_commit(struct vc4_dev
> > *vc4,
> > struct vc4_crtc_state *vc4_state =
> > to_vc4_crtc_state(crtc_state);
> > struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
> >
> > - if (!crtc_state->active)
> > + if (!vc4_state->needs_muxing)
> > continue;
> >
> > switch (vc4_crtc->data->hvs_output) {
> > case 2:
> > - dsp2_mux = (vc4_state->assigned_channel == 2) ? 0 : 1;
> > + mux = (vc4_state->assigned_channel == 2) ? 0 : 1;
> > + reg = HVS_READ(SCALER_DISPECTRL);
> > + HVS_WRITE(SCALER_DISPECTRL,
> > + (reg & ~SCALER_DISPECTRL_DSP2_MUX_MASK) |
> > + VC4_SET_FIELD(mux,
> > SCALER_DISPECTRL_DSP2_MUX));
> > break;
> >
> > case 3:
> > - dsp3_mux = vc4_state->assigned_channel;
> > + if (vc4_state->assigned_channel ==
> > VC4_HVS_CHANNEL_DISABLED)
> > + mux = 3;
> > + else
> > + mux = vc4_state->assigned_channel;
> > +
> > + reg = HVS_READ(SCALER_DISPCTRL);
> > + HVS_WRITE(SCALER_DISPCTRL,
> > + (reg & ~SCALER_DISPCTRL_DSP3_MUX_MASK) |
> > + VC4_SET_FIELD(mux, SCALER_DISPCTRL_DSP3_MUX));
> > break;
> >
> > case 4:
> > - dsp4_mux = vc4_state->assigned_channel;
> > + if (vc4_state->assigned_channel ==
> > VC4_HVS_CHANNEL_DISABLED)
> > + mux = 3;
> > + else
> > + mux = vc4_state->assigned_channel;
> > +
> > + reg = HVS_READ(SCALER_DISPEOLN);
> > + HVS_WRITE(SCALER_DISPEOLN,
> > + (reg & ~SCALER_DISPEOLN_DSP4_MUX_MASK) |
> > + VC4_SET_FIELD(mux, SCALER_DISPEOLN_DSP4_MUX));
> > +
> > break;
> >
> > case 5:
> > - dsp5_mux = vc4_state->assigned_channel;
> > + if (vc4_state->assigned_channel ==
> > VC4_HVS_CHANNEL_DISABLED)
> > + mux = 3;
> > + else
> > + mux = vc4_state->assigned_channel;
> > +
> > + reg = HVS_READ(SCALER_DISPDITHER);
> > + HVS_WRITE(SCALER_DISPDITHER,
> > + (reg & ~SCALER_DISPDITHER_DSP5_MUX_MASK) |
> > + VC4_SET_FIELD(mux,
> > SCALER_DISPDITHER_DSP5_MUX));
> > break;
> >
> > default:
> > break;
> > }
> > }
> > -
> > - reg = HVS_READ(SCALER_DISPECTRL);
> > - HVS_WRITE(SCALER_DISPECTRL,
> > - (reg & ~SCALER_DISPECTRL_DSP2_MUX_MASK) |
> > - VC4_SET_FIELD(dsp2_mux, SCALER_DISPECTRL_DSP2_MUX));
> > -
> > - reg = HVS_READ(SCALER_DISPCTRL);
> > - HVS_WRITE(SCALER_DISPCTRL,
> > - (reg & ~SCALER_DISPCTRL_DSP3_MUX_MASK) |
> > - VC4_SET_FIELD(dsp3_mux, SCALER_DISPCTRL_DSP3_MUX));
> > -
> > - reg = HVS_READ(SCALER_DISPEOLN);
> > - HVS_WRITE(SCALER_DISPEOLN,
> > - (reg & ~SCALER_DISPEOLN_DSP4_MUX_MASK) |
> > - VC4_SET_FIELD(dsp4_mux, SCALER_DISPEOLN_DSP4_MUX));
> > -
> > - reg = HVS_READ(SCALER_DISPDITHER);
> > - HVS_WRITE(SCALER_DISPDITHER,
> > - (reg & ~SCALER_DISPDITHER_DSP5_MUX_MASK) |
> > - VC4_SET_FIELD(dsp5_mux, SCALER_DISPDITHER_DSP5_MUX));
> > }
> >
> > static void
> > @@ -769,21 +775,29 @@ static int vc4_pv_muxing_atomic_check(struct
> > drm_device *dev,
> > return -EINVAL;
> >
> > for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state,
> > new_crtc_state, i) {
> > + struct vc4_crtc_state *old_vc4_crtc_state =
> > + to_vc4_crtc_state(old_crtc_state);
>
> In my opinion, the old_vc4_crtc_state definition is better to move to
> patch6.
> Build error occurs in patch6 because old_vc4_crtc_state is used in patch6.You're totally right, I've fixed it in my third version, thanks! Maxime
signature.asc
Description: PGP signature
_______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
