Hi Nikhil,
Thank you for the patch.
On Fri, Oct 16, 2020 at 04:09:14PM +0530, Nikhil Devshatwar wrote:
> When there is a chain of bridges attached to the encoder,
> the bus_format should be ideally set from the input format of the
> first bridge in the chain.
>
> Use the bridge state to get the negotiated bus_format.
> If the bridge does not support format negotiation, error out
> and fail.
>
> Signed-off-by: Nikhil Devshatwar <nikhil...@ti.com>
> ---
> drivers/gpu/drm/tidss/tidss_encoder.c | 16 +++++++++++-----
> 1 file changed, 11 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/tidss/tidss_encoder.c
> b/drivers/gpu/drm/tidss/tidss_encoder.c
> index e278a9c89476..ae7f134754b7 100644
> --- a/drivers/gpu/drm/tidss/tidss_encoder.c
> +++ b/drivers/gpu/drm/tidss/tidss_encoder.c
> @@ -22,6 +22,7 @@ static int tidss_encoder_atomic_check(struct drm_encoder
> *encoder,
> struct drm_device *ddev = encoder->dev;
> struct tidss_crtc_state *tcrtc_state = to_tidss_crtc_state(crtc_state);
> struct drm_display_info *di = &conn_state->connector->display_info;
> + struct drm_bridge_state *bstate;
> struct drm_bridge *bridge;
> bool bus_flags_set = false;
>
> @@ -41,14 +42,19 @@ static int tidss_encoder_atomic_check(struct drm_encoder
> *encoder,
> break;
> }
>
> - if (!di->bus_formats || di->num_bus_formats == 0) {
> - dev_err(ddev->dev, "%s: No bus_formats in connected display\n",
> - __func__);
> + /* Copy the bus_format from the input_bus_format of first bridge */
> + bridge = drm_bridge_chain_get_first_bridge(encoder);
> + bstate = drm_atomic_get_new_bridge_state(crtc_state->state, bridge);
> + if (bstate)
> + tcrtc_state->bus_format = bstate->input_bus_cfg.format;
> +
> + if (tcrtc_state->bus_format == 0 ||
> + tcrtc_state->bus_format == MEDIA_BUS_FMT_FIXED) {
> +
> + dev_err(ddev->dev, "Bridge connected to the encoder did not
> specify media bus format\n");
> return -EINVAL;
> }
>
> - // XXX any cleaner way to set bus format and flags?
> - tcrtc_state->bus_format = di->bus_formats[0];
> if (!bus_flags_set)
> tcrtc_state->bus_flags = di->bus_flags;
Shouldn't the flags also be retrieved from the bridge state ?
>
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
