Hi Biju, Laurent

On Tue, Sep 22, 2020 at 01:55:26PM +0300, Laurent Pinchart wrote:
> From: Biju Das <biju.das...@bp.renesas.com>
> 
> Add the support for enabling optional regulator that may be used as VCC
> source.
> 
> Signed-off-by: Biju Das <biju.das...@bp.renesas.com>
> Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
> [Replaced 'error' variable with 'ret']
> [Renamed regulator from 'vcc' to 'power']
> Signed-off-by: Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com>

Applied to drm-misc-next.
Biju, could you make a follow-up patch that introduces dev_err_probe()
where appropriate? I did not fix up the code but this was a good
candidate.

        Sam

> ---
> Changes since v2:
> 
> - Use the correct regulator name
> ---
>  drivers/gpu/drm/bridge/lvds-codec.c | 29 +++++++++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
> 
> diff --git a/drivers/gpu/drm/bridge/lvds-codec.c 
> b/drivers/gpu/drm/bridge/lvds-codec.c
> index f19d9f7a5db2..f52ccffc1bd1 100644
> --- a/drivers/gpu/drm/bridge/lvds-codec.c
> +++ b/drivers/gpu/drm/bridge/lvds-codec.c
> @@ -10,13 +10,16 @@
>  #include <linux/of_device.h>
>  #include <linux/of_graph.h>
>  #include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
>  
>  #include <drm/drm_bridge.h>
>  #include <drm/drm_panel.h>
>  
>  struct lvds_codec {
> +     struct device *dev;
>       struct drm_bridge bridge;
>       struct drm_bridge *panel_bridge;
> +     struct regulator *vcc;
>       struct gpio_desc *powerdown_gpio;
>       u32 connector_type;
>  };
> @@ -38,6 +41,14 @@ static int lvds_codec_attach(struct drm_bridge *bridge,
>  static void lvds_codec_enable(struct drm_bridge *bridge)
>  {
>       struct lvds_codec *lvds_codec = to_lvds_codec(bridge);
> +     int ret;
> +
> +     ret = regulator_enable(lvds_codec->vcc);
> +     if (ret) {
> +             dev_err(lvds_codec->dev,
> +                     "Failed to enable regulator \"vcc\": %d\n", ret);
> +             return;
> +     }
>  
>       if (lvds_codec->powerdown_gpio)
>               gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 0);
> @@ -46,9 +57,15 @@ static void lvds_codec_enable(struct drm_bridge *bridge)
>  static void lvds_codec_disable(struct drm_bridge *bridge)
>  {
>       struct lvds_codec *lvds_codec = to_lvds_codec(bridge);
> +     int ret;
>  
>       if (lvds_codec->powerdown_gpio)
>               gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 1);
> +
> +     ret = regulator_disable(lvds_codec->vcc);
> +     if (ret)
> +             dev_err(lvds_codec->dev,
> +                     "Failed to disable regulator \"vcc\": %d\n", ret);
>  }
>  
>  static const struct drm_bridge_funcs funcs = {
> @@ -63,12 +80,24 @@ static int lvds_codec_probe(struct platform_device *pdev)
>       struct device_node *panel_node;
>       struct drm_panel *panel;
>       struct lvds_codec *lvds_codec;
> +     int ret;
>  
>       lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL);
>       if (!lvds_codec)
>               return -ENOMEM;
>  
> +     lvds_codec->dev = &pdev->dev;
>       lvds_codec->connector_type = (uintptr_t)of_device_get_match_data(dev);
> +
> +     lvds_codec->vcc = devm_regulator_get(lvds_codec->dev, "power");
> +     if (IS_ERR(lvds_codec->vcc)) {
> +             ret = PTR_ERR(lvds_codec->vcc);
> +             if (ret != -EPROBE_DEFER)
> +                     dev_err(lvds_codec->dev,
> +                             "Unable to get \"vcc\" supply: %d\n", ret);
> +             return ret;
> +     }
> +
>       lvds_codec->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown",
>                                                            GPIOD_OUT_HIGH);
>       if (IS_ERR(lvds_codec->powerdown_gpio))
> -- 
> Regards,
> 
> Laurent Pinchart
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to