> -----Original Message-----
> From: Jason Gunthorpe <j...@ziepe.ca>
> Sent: Monday, October 05, 2020 9:33 AM
> To: Xiong, Jianxin <jianxin.xi...@intel.com>
> Cc: linux-r...@vger.kernel.org; dri-devel@lists.freedesktop.org; Doug Ledford
> <dledf...@redhat.com>; Leon Romanovsky
> <l...@kernel.org>; Sumit Semwal <sumit.sem...@linaro.org>; Christian Koenig
> <christian.koe...@amd.com>; Vetter, Daniel
> <daniel.vet...@intel.com>
> Subject: Re: [RFC PATCH v3 1/4] RDMA/umem: Support importing dma-buf as user
> memory region
>
> On Mon, Oct 05, 2020 at 04:18:11PM +0000, Xiong, Jianxin wrote:
>
> > > The implementation in mlx5 will be much more understandable, it
> > > would just do dma_buf_dynamic_attach() and program the XLT exactly the
> > > same as a normal umem.
> > >
> > > The move_notify() simply zap's the XLT and triggers a work to reload
> > > it after the move. Locking is provided by the dma_resv_lock. Only a small
> > > disruption to the page fault handler is needed.
> >
> > We considered such scheme but didn't go that way due to the lack of
> > notification when the move is done and thus the work wouldn't know
> > when it can reload.
>
> Well, the work would block on the reservation lock and that indicates the
> move is done
Got it. Will work on that.
>
> It would be nicer if the dma_buf could provide an op that things are ready to
> go though
>
> > Now I think it again, we could probably signal the reload in the page fault
> > handler.
>
> This also works, with a performance cost
>
> > > > + dma_resv_lock(umem_dmabuf->attach->dmabuf->resv, NULL);
> > > > + sgt = dma_buf_map_attachment(umem_dmabuf->attach,
> > > > + DMA_BIDIRECTIONAL);
> > > > + dma_resv_unlock(umem_dmabuf->attach->dmabuf->resv);
> > >
> > > This doesn't look right, this lock has to be held up until the HW is
> > > programmed
> >
> > The mapping remains valid until being invalidated again. There is a
> > sequence number checking before programming the HW.
>
> It races, we could immediately trigger invalidation and then re-program the
> HW with this stale data.
>
> > > The use of atomic looks probably wrong as well.
> >
> > Do you mean umem_dmabuf->notifier_seq? Could you elaborate the concern?
>
> It only increments once per invalidation, that usually is racy.
I will rework these parts.
>
> > > > + total_pages = ib_umem_odp_num_pages(umem_odp);
> > > > + for_each_sg(umem->sg_head.sgl, sg, umem->sg_head.nents, j) {
> > > > + addr = sg_dma_address(sg);
> > > > + pages = sg_dma_len(sg) >> page_shift;
> > > > + while (pages > 0 && k < total_pages) {
> > > > + umem_odp->dma_list[k++] = addr | access_mask;
> > > > + umem_odp->npages++;
> > > > + addr += page_size;
> > > > + pages--;
> > >
> > > This isn't fragmenting the sg into a page list properly, won't work
> > > for unaligned things
> >
> > I thought the addresses are aligned, but will add explicit alignment here.
>
> I have no idea what comes out of dma_buf, I wouldn't make too many
> assumptions since it does have to pass through the IOMMU layer too
>
> > > And really we don't need the dma_list for this case, with a fixed
> > > whole mapping DMA SGL a normal umem sgl is OK and the normal umem
> > > XLT programming in mlx5 is fine.
> >
> > The dma_list is used by both "polulate_mtt()" and
> > "mlx5_ib_invalidate_range", which are used for XLT programming and
> > invalidating (zapping), respectively.
>
> Don't use those functions for the dma_buf flow.
Ok. I think we can use mlx5_ib_update_xlt() directly for dma-buf case.
>
> Jason
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
