The OnSemi FIN3385 Parallel-to-LVDS encoder has a dedicated input line to
select input pixel data sampling edge. Add DT property "pixelclk-active",
same as the one used by display timings, and configure bus flags based on
this DT property.
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Alexandre Torgue <alexandre.tor...@st.com>
Cc: Andrzej Hajda <a.ha...@samsung.com>
Cc: Antonio Borneo <antonio.bor...@st.com>
Cc: Benjamin Gaignard <benjamin.gaign...@st.com>
Cc: Biju Das <biju.das...@bp.renesas.com>
Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Cc: Maxime Coquelin <mcoquelin.st...@gmail.com>
Cc: Philippe Cornu <philippe.co...@st.com>
Cc: Sam Ravnborg <s...@ravnborg.org>
Cc: Vincent Abriou <vincent.abr...@st.com>
Cc: Yannick Fertre <yannick.fer...@st.com>
Cc: linux-arm-ker...@lists.infradead.org
Cc: linux-st...@st-md-mailman.stormreply.com
To: dri-devel@lists.freedesktop.org
---
drivers/gpu/drm/bridge/lvds-codec.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/gpu/drm/bridge/lvds-codec.c
b/drivers/gpu/drm/bridge/lvds-codec.c
index f52ccffc1bd1..bc941d4fb5b9 100644
--- a/drivers/gpu/drm/bridge/lvds-codec.c
+++ b/drivers/gpu/drm/bridge/lvds-codec.c
@@ -19,6 +19,7 @@ struct lvds_codec {
struct device *dev;
struct drm_bridge bridge;
struct drm_bridge *panel_bridge;
+ struct drm_bridge_timings timings;
struct regulator *vcc;
struct gpio_desc *powerdown_gpio;
u32 connector_type;
@@ -80,6 +81,7 @@ static int lvds_codec_probe(struct platform_device *pdev)
struct device_node *panel_node;
struct drm_panel *panel;
struct lvds_codec *lvds_codec;
+ u32 val;
int ret;
lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL);
@@ -124,6 +126,12 @@ static int lvds_codec_probe(struct platform_device *pdev)
if (IS_ERR(lvds_codec->panel_bridge))
return PTR_ERR(lvds_codec->panel_bridge);
+ if (!of_property_read_u32(dev->of_node, "pixelclk-active", &val)) {
+ lvds_codec->timings.input_bus_flags = val ?
+ DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE :
+ DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE;
+ }
+
/*
* The panel_bridge bridge is attached to the panel's of_node,
* but we need a bridge attached to our of_node for our user
@@ -131,6 +139,7 @@ static int lvds_codec_probe(struct platform_device *pdev)
*/
lvds_codec->bridge.of_node = dev->of_node;
lvds_codec->bridge.funcs = &funcs;
+ lvds_codec->bridge.timings = &lvds_codec->timings;
drm_bridge_add(&lvds_codec->bridge);
platform_set_drvdata(pdev, lvds_codec);
--
2.28.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
