On 31/08/2020 22:02, Anitha Chrisanthus wrote:
> This is a basic KMS atomic modesetting display driver for KeemBay family of
> SOCs. Driver has no 2D or 3D graphics.It calls into the ADV bridge
> driver at the connector level.
>
> Single CRTC with LCD controller->mipi DSI-> ADV bridge
>
> Only 1080p resolution and single plane is supported at this time.
>
> v2: moved extern to .h, removed license text
> use drm_dev_init, upclassed dev_private, removed HAVE_IRQ.(Sam)
>
> v3: Squashed all 59 commits to one
>
> v4: review changes from Sam Ravnborg
> renamed dev_p to kmb
> moved clocks under kmb_clock, consolidated clk initializations
> use drmm functions
> use DRM_GEM_CMA_DRIVER_OPS_VMAP
>
> v5: corrected spellings
> v6: corrected checkpatch warnings
> v7: review changes Sam Ravnborg and Thomas Zimmerman
> removed kmb_crtc.h kmb_crtc_cleanup (Thomas)
> renamed mode_set, kmb_load, inlined unload (Thomas)
> moved remaining logging to drm_*(Thomas)
> re-orged driver initialization (Thomas)
> moved plane_status to drm_private (Sam)
> removed unnecessary logs and defines and ifdef codes (Sam)
> call helper_check in plane_atomic_check (Sam)
> renamed set to get for bpp and format functions(Sam)
> use drm helper functions for reset, duplicate/destroy state instead
> of kmb functions (Sam)
> removed kmb_priv from kmb_plane and removed kmb_plane_state (Sam)
>
> Cc: Sam Ravnborg <s...@ravnborg.org>
> Signed-off-by: Anitha Chrisanthus <anitha.chrisant...@intel.com>
> Reviewed-by: Bob Paauwe <bob.j.paa...@intel.com>
> ---
> drivers/gpu/drm/kmb/kmb_crtc.c | 224 +++++++++++++
> drivers/gpu/drm/kmb/kmb_drv.c | 676
> ++++++++++++++++++++++++++++++++++++++++
> drivers/gpu/drm/kmb/kmb_drv.h | 170 ++++++++++
> drivers/gpu/drm/kmb/kmb_plane.c | 480 ++++++++++++++++++++++++++++
> drivers/gpu/drm/kmb/kmb_plane.h | 110 +++++++
> 5 files changed, 1660 insertions(+)
> create mode 100644 drivers/gpu/drm/kmb/kmb_crtc.c
> create mode 100644 drivers/gpu/drm/kmb/kmb_drv.c
> create mode 100644 drivers/gpu/drm/kmb/kmb_drv.h
> create mode 100644 drivers/gpu/drm/kmb/kmb_plane.c
> create mode 100644 drivers/gpu/drm/kmb/kmb_plane.h
>
[...]
> +
> +static const struct of_device_id kmb_of_match[] = {
> + {.compatible = "intel,kmb_display"},
> + {},
> +};
As I already commented on v1, a proper YAML bindings files
is mandatory here, to check if the bindings are correct and if
the drivers uses them correctly (port/endpoints, etc..)
Neil
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
